Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

An automated patient monitoring using discrete‐time wireless sensor networks

In recent years, Internet of Things (IoT) devices are used for remote health monitoring. For remotely monitoring a patient, only the health information at different time points are not sufficient; predicted values of biomarkers (for some future time points) are also important. In this article, we propose a powerful statistical model for an efficient dynamic patient monitoring using wireless sensor nodes through Bayesian Learning (BL). We consider the setting where a set of correlated biomarkers are measured from a patient through wireless sensors, but the sensors only report the ordinal outcomes (say, good, fair, high, or very high) to the sink based on some prefixed thresholds. The challenge is to use the ordinal outcomes for monitoring and predicting the health status of the patient under consideration. We propose a linear mixed model where interbiomarker correlations and intrabiomarker dependence are modeled simultaneously. The estimated and the predicted values of the biomarkers are transferred over the internet so that health care providers and the family members of the patient can remotely monitor the patient. Extensive simulation studies are performed to assess practical usefulness of our proposed joint model, and the performance of the proposed joint model is compared to that of some other traditional models used in the literature.     

Metal-containing intermacromolecular complexes: Electrochemical and viscometric studies in DMF-methanol mixture

Summary Multicomponent intermacromolecular complexes have been prepared from some typical phenolic copolymers with a non-ionic polymer (e.g. PVP), and a polyelectrolyte (e.g. PAA). Some transition metal ions (e.g. Cu(II) and Ni (II)) have been incorporated in the complex through its unreacted co-ordinating groups. The formation of these complexes has been studied by several techniques, such as viscometry, conductometry, potentiometry, IR and UV spectrophotometry. A scheme has been presented to explain the mode of interaction of the various components.     

In vitro and in vivo studies on the cardioprotective action of oligomeric procyanidins in a Crataegus extract of leaves and blooms

Cardioprotective effects of a standardized extract from leaves with flowers of Crataegus (WS-1442; content of oligomeric procyandins [OPC]: 18.75%) have recently been demonstrated in an ischemia-reperfusion model in rats. Further studies were now conducted to clarify the mechanism of action and to identify active constituents involved in these effects of WS-1442. Exhausting partitioning between ethyl acetate/water and successive ultrafiltration of the aqueous layer led to the quantitative recovery of three fractions, which were tested for their in vitro radical scavenging (RS) and human neutrophil elastase (HNE) inhibitory activity. The lipophilic ethylacetate-soluble fraction A, enriched in flavone derivatives and constituting 14.9% of WS-1442, was as active as WS-1442 in inhibiting HNE. However, its RS activity was only about half that of the primary extract. Although 67.9% of WS-1442 was recovered in a water-soluble low molecular weight fraction B, this fraction displayed only weak RS and HNE inhibiting activity. In contrast, the RS and HNE inhibiting potencies of an essentially flavone-free and OPC-rich fraction C (21.3% of WS-1442) were significantly higher (inhibition of lipid peroxidation: IC50 0.3 microgram/ml; inhibition of HNE: IC50 0.84 microgram/ml) as those of WS-1442. The RS and HNE inhibitory activities of the extract and those of its fractions correlated well with their OPC-content but not with their concentration of flavonols. These results demonstrate that OPCs of Crataegus extracts possess stronger radical scavenging activities than flavone derivatives or other constituents. In addition, the oligomeric components are potent inhibitors of HNE. Oral administration of 20 mg/kg/d of the OPC-rich fraction C to rats afforded similar protection against ischemia-reperfusion induced pathologies as treatment with WS-1442 at a dose of 100 mg/kg/d. These observations indicate that radical scavenging and elastase inhibitory activities could indeed be involved in the observed cardioprotective effects of WS-1442, and demonstrate that OPCs are major orally active constituents of WS-1442. Thus, Crataegus extracts used therapeutically for cardiovascular diseases should be analyzed and standardized for their OPC-content.     

Instability due to Viscosity Stratification Downstream of a Centerline Injector

A common injector geometry upstream of a static mixer is the centerline injector. A flow instability can arise due to viscosity differences between the injected core‐flow and the outer co‐flow. This instability can adversely affect the effectiveness of the mixing operation. An experimental investigation of miscible viscosity‐stratified flow in a circular geometry was performed using Laser Induced Fluorescence (LIF) and Particle Image Velocimetry (PIV). The experimental results for the stable region agree with the analytical results. The unstable region exhibits different modes depending on the viscosity ratio, volume flux ratio, and Reynolds number. The modes include wavy core‐flow with fissures and wavy core‐flow with core breakup. The time‐averaged experiment velocity profiles for the unstable core indicate a broadening of the jet at the centerline, which is consistent with the LIF visualization.     

Characterization of in Vitro Transdermal Iontophoretic Delivery of Insulin

In-vitro studies were conducted to characterize the transdermal iontophoretic delivery of insulin, thus avoiding potential complications from various biological variations, which may be encountered during in-vivo studies. The proteolytic degradation of insulin in skin homogenates and degradation under the experimental conditions used was investigated. Appropriate adjuvants were incorporated to minimize the potential degradation problems of insulin. ¹²⁵I-Insulin was observed to penetrate into and accumulate in the skin during the iontophoresis period. It was then released gradually from this depot, as a mixture of intact and ¹²⁵-I labelled fragments, into the receptor medium. Drug desorption studies supported the theory of skin depot or reservoir formation. It was found that an electric field could be used to facilitate the desorption of drug from the depot. The post-application flux of insulin (or its fragments) from the skin depot formed during iontophoresis was monitored to study the factors affecting the iontophoretic delivery of insulin. Stripping and delipidization of the skin were noted to increase the skin permeation rate of insulin. The cumulative radioactivity permeated and accumulated in the skin was higher at pH 3.6 than at pH 7.4. The iontophoresis-facilitated transdermal delivery was observed to increase with increasing duration of current application and increasing donor concentration of insulin. Modulation of drug delivery by multiple applications was also found to be feasible.     

Single‐Walled Carbon Nanotube Dispersions in Poly(ethylene oxide)

Dispersions of single‐walled carbon nanotubes (SWNTs) in poly(ethylene oxide) (PEO) assisted by a lithium‐based anionic surfactant demonstrate an electrical percolation of 0.03 wt.‐% and a geometrical percolation, inferred from melt rheometry, of 0.09 wt.‐%. Both the melting temperature and the extent of crystallinity of the PEO crystals decrease with increasing SWNT loading. Raman spectroscopy of the nanocomposites indicates a down‐shift of the SWNT G‐modes and suggests that the nanotubes are subjected to tensile stress transfer from the polymer at room temperature.     

Some observations on morphology of anhydride-modified polystyrene

Friedel–Crafts acylation reaction between polystyrene and phthalic anhydride in the presence of AlCl₃ has been performed in two different solvents, 1,2-dichloro ethane and nitro-benzene. The morphology of the condensate prepared in 1,2-dichloroethane has revealed the participation of 1,2-dichloroethane, i.e., a competitive Friedel–Crafts alkylation reaction.