Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

Modeling of diffusional limitations in styrene acrylonitrile random bulk copolymerization

Diffusional limitations (the gel, glass, and cage effects) are manifested in several bulk free radical homopolymerizations as well as in random copolymerizations. These are associated with decreases of several orders of magnitude of the rate constants of termination, propagation, and initiation (the initiator efficiency), respectively. These phenomena have been modeled earlier using the free volume theory for the diffusivities of primary radicals, macro‐radicals, and monomer molecules, and have been applied to homopolymerizations. In this study, a similar model is developed for random bulk copolymerizations. The parameters of the model are fitted using isothermal data on styrene acrylonitrile random copolymerization carried out in small ampoules. Thereafter, best‐fit global correlations have been developed for this system. This enables the model to be used for studying non‐isothermal copolymerizations, as well as for carrying out optimization of industrial reactors, where non‐isothermal conditions are a norm. POLYM. ENG. SCI., 55:2098–2110, 2015. © 2014 Society of Plastics Engineers     

Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

Optimal size,hydraulic retention time and volatile solids loading rate of biogas unit using water hyacinth

With a view to evaluate the effects of hydraulic retention time and volatile solids loading rate on methane production using water hyacinth, experiments were conducted in a 160 dm³ capacity, well-mixed continuous digestion unit at ambient temperature. The optimal design of biogas plant using water hyacinth was elucidated, to provide a unit giving a maximum methane yield of 0.16 nm³ kg^?1 volatile solids added, which was 60% greater than the conventional plant using cowdung. The calculations of optimal design factors were based on reactor size, hydraulic retention time and volatile solids loading rate; considerations were made of capital cost, running costs and operational revenue.     

Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

The presentations made, as well as the discussions, in the panels at the workshop, Thermal Challenges in Next Generation Electronic Systems (THERMES), are summarized in this paper. The panels dealt with diverse topics including thermal management roadmaps, microscale cooling systems, numerical modeling from the component to system levels, hardware for future high performance and Internet computing architectures, and transport issues in the manufacturing of electronic packages. The focus of the panels was to identify barriers to further progress in each area that require the attention of the research community.     

Instability due to Viscosity Stratification Downstream of a Centerline Injector

A common injector geometry upstream of a static mixer is the centerline injector. A flow instability can arise due to viscosity differences between the injected core‐flow and the outer co‐flow. This instability can adversely affect the effectiveness of the mixing operation. An experimental investigation of miscible viscosity‐stratified flow in a circular geometry was performed using Laser Induced Fluorescence (LIF) and Particle Image Velocimetry (PIV). The experimental results for the stable region agree with the analytical results. The unstable region exhibits different modes depending on the viscosity ratio, volume flux ratio, and Reynolds number. The modes include wavy core‐flow with fissures and wavy core‐flow with core breakup. The time‐averaged experiment velocity profiles for the unstable core indicate a broadening of the jet at the centerline, which is consistent with the LIF visualization.     

Characterization of in Vitro Transdermal Iontophoretic Delivery of Insulin

In-vitro studies were conducted to characterize the transdermal iontophoretic delivery of insulin, thus avoiding potential complications from various biological variations, which may be encountered during in-vivo studies. The proteolytic degradation of insulin in skin homogenates and degradation under the experimental conditions used was investigated. Appropriate adjuvants were incorporated to minimize the potential degradation problems of insulin. ¹²⁵I-Insulin was observed to penetrate into and accumulate in the skin during the iontophoresis period. It was then released gradually from this depot, as a mixture of intact and ¹²⁵-I labelled fragments, into the receptor medium. Drug desorption studies supported the theory of skin depot or reservoir formation. It was found that an electric field could be used to facilitate the desorption of drug from the depot. The post-application flux of insulin (or its fragments) from the skin depot formed during iontophoresis was monitored to study the factors affecting the iontophoretic delivery of insulin. Stripping and delipidization of the skin were noted to increase the skin permeation rate of insulin. The cumulative radioactivity permeated and accumulated in the skin was higher at pH 3.6 than at pH 7.4. The iontophoresis-facilitated transdermal delivery was observed to increase with increasing duration of current application and increasing donor concentration of insulin. Modulation of drug delivery by multiple applications was also found to be feasible.     

Optimization of reactive SMB and Varicol systems

A comprehensive optimization study on a simulated moving bed reactor (SMBR) system is reported in this article for the direct synthesis of methyl tertiary butyl ether (MTBE) from tertiary butyl alcohol (TBA) and methanol. The applicability of the Varicol process, which is based on non-synchronous shift of the inlet and outlet ports, is explored for the first time for a reactive system. Multi-objective (two and three objective functions) optimization has been performed for both existing as well as design stage for SMBR and Varicol systems and their efficiencies are compared. The optimization problem involves relatively large number of decision variables; both continuous variables, such as flow rates in various sections and length of the columns and discrete variables, such as number of columns and column configuration. Pareto optimal solutions are obtained. It is observed that a five-column Varicol performs better than an equivalent five-column SMBR and its performance is nearly equal to that of a six-column SMBR in terms of purity and yield of MTBE and minimal eluent consumption. This is an important inference as it enables the reduction of fixed and operating costs while at the same time helps to achieve high purity and yield of the desired product and conversion of the limiting reactant. A state-of-the-art optimization technique, viz., non-dominated sorting genetic algorithm (NSGA), which allows handling of these complex optimization problems, is employed for this study. This is the first time that, not only the separating potential of Varicol has been extended to reaction systems, but also was optimized for multiple objectives.     

Detecting stable locality-aware predicates

In a large-scale locality-driven network such as in modular robotics and wireless sensor networks, knowing the state of a local area is sometimes necessary due to either interactions being local and driven by neighborhood proximity or the users being interested in the state of a certain region. We define locality-aware predicates (LAP) that aim at detecting a predicate within a specified area. We model the area of interest as the set of processes that are within a breadth-first search tree (BFST) of height k$k$ rooted at the initiator process. Although a locality-aware predicate specifies a predicate only within a local area, observing the area consistently requires considering the entire system in a consistent manner. This raises the challenge of making the complexities of the corresponding predicate detection algorithms scale-free, i.e., independent of the size of the system. Since all existing algorithms for getting a consistent view of the system require either a global snapshot of the entire system or vector clocks of the size of the system, a new solution is needed. We focus on stable LAP, which are those LAP that remain true once they become true. We propose a scale-free algorithm to detect stable LAP within a k$k$-height BFST. Our algorithm can detect both stable conjunctive LAP and stable relational LAP. In the process of designing our algorithm, we also propose the first distributed algorithm for building a BFST within an area of interest in a graph, and the first distributed algorithm for recording a consistent sub-cut within the area of interest. This paper demonstrates that LAPs are a natural fit for detecting distributed properties in large-scale distributed systems, and stable LAPs can be practically detected at low cost.