Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering

Porous ZrO₂ ceramics were fabricated by compacting a fine ZrO₂ powder, followed by pressureless sintering. Two unidirectional pressures of 30 and 75 MPa were used to prepare the green compacts. The strength and the fracture toughness of porous ZrO₂ specimens sintered from the compacts prepared by 75 MPa were substantially higher than those by 30 MPa, especially for the specimens with low porosity. However, the corresponding Young's moduli were identical. This caused the strain to failure of these porous bodies to increase significantly with increasing compaction pressure. Microstructural analyses showed that a number of voids and small flaws existed in the green compacts prepared by the lower pressure, due to the agglomeration of fine ZrO₂ grains. It was revealed that the ZrO₂ agglomeration resulted in a localized nonuniform shrinkage and degraded the mechanical properties of porous ZrO₂ ceramics.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

A parallel method for large sparse generalized eigenvalue problems using a GridRPC system

In this paper we present a master–worker type parallel method for finding several eigenvalues and eigenvectors of a generalized eigenvalue problem , where A and B are large sparse matrices. A moment-based method that finds all of the eigenvalues that lie inside a given domain is used. In this method, a small matrix pencil that has only the desired eigenvalues is derived by solving large sparse systems of linear equations constructed from A and B. Since these equations can be solved independently, we solve them on remote servers in parallel. This approach is suitable for master–worker programming models. We have implemented and tested the proposed method in a grid environment using a grid RPC (remote procedure call) system called OmniRPC. The performance of the method on PC clusters that were used over a wide-area network was evaluated.     

Increased Synovial CD14 mRNA Expression and Proportion of CD14high Subsets in Early-Stage Hip Osteoarthritis: Propensity Matched Score Analysis

The pathophysiology of early-stage hip osteoarthritis (EOA) is not fully understood. Although a previous study in an age-unmatched cohort reported that the number of macrophages was increased in knee EOA compared to late OA (LOA), it remained unclear whether increased macrophages in EOA accurately reflect EOA pathology. We investigated the differences in CD14 expression levels between EOA and LOA using age-unmatched and -matched cohorts. Synovial tissues were obtained from 34 EOA (Tönnis grades 0 and 1) and 80 LOA (Tönnis grades 2 and 3) patients. To correct for differences in demographics between patients with LOA and EOA, we also created propensity score-matched cohorts (16 EOA and 16 LOA). CD14 expression and its association with pain was estimated in LOA and EOA before and after propensity matching. We performed flow cytometry on tissues from the 16 patients, with 8 from each group, to assess for CD14+ subsets in the cells. The CD14 expression in EOA was higher than that in LOA both before and after propensity matching. The proportion of CD14^high subsets in EOA was higher than that in LOA. The CD14 expression was associated with pain in EOA before matching. However, no difference was observed between the pain and CD14 expression after matching in EOA. The increased CD14 expression and the proportion of CD14^high subsets may be important features associated with hip EOA pathology. To accurately compare early and late OA, the analysis of a propensity score-matched cohort is necessary.     

RTCB Complex Regulates Stress-Induced tRNA Cleavage

Under stress conditions, transfer RNAs (tRNAs) are cleaved by stress-responsive RNases such as angiogenin, generating tRNA-derived RNAs called tiRNAs. As tiRNAs contribute to cytoprotection through inhibition of translation and prevention of apoptosis, the regulation of tiRNA production is critical for cellular stress response. Here, we show that RTCB ligase complex (RTCB-LC), an RNA ligase complex involved in endoplasmic reticulum (ER) stress response and precursor tRNA splicing, negatively regulates stress-induced tiRNA production. Knockdown of RTCB significantly increased stress-induced tiRNA production, suggesting that RTCB-LC negatively regulates tiRNA production. Gel-purified tiRNAs were repaired to full-length tRNAs by RtcB in vitro, suggesting that RTCB-LC can generate full length tRNAs from tiRNAs. As RTCB-LC is inhibited under oxidative stress, we further investigated whether tiRNA production is promoted through the inhibition of RTCB-LC under oxidative stress. Although hydrogen peroxide (H₂O₂) itself did not induce tiRNA production, it rapidly boosted tiRNA production under the condition where stress-responsive RNases are activated. We propose a model of stress-induced tiRNA production consisting of two factors, a trigger and booster. This RTCB-LC-mediated boosting mechanism may contribute to the effective stress response in the cell.     

Route guidance by a car navigation system based on augmented reality

Car navigation systems play a prominent role in road traffic safety and traffic regulation. However, it is necessary to improve the route guidance of car navigation systems so that they accurately and quickly recognize small differences in location. Thus, to increase the ease of understanding and safety of car navigation systems, navigation systems based on augmented reality have been proposed for providing guidance at road intersections. We are currently developing a car navigation system based on augmented reality, called AR‐Navi. We investigated designs for the display of road intersection guidance that can be easily understood even when limited information is available and proposed a “best shot” display method that does not use moving images. In addition, we implemented a prototype system that includes these methods and conducted driving experiments on public roads to evaluate the ease of understanding and safety of AR‐Navi. Using the evaluation results, we confirmed that the ease of understanding and safety is similar in the case of AR‐Navi and CG‐Navi. We also clarified the characteristics of AR‐Navi. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(2): 43–54, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22278     

Analysis of the Microstructure of Mg2Si Thermoelectric Devices

High-performance Mg₂Si thermoelectric devices have been obtained by spark plasma sintering of high-purity, pre-synthesized, all-molten Mg₂Si powder. We studied the effects of source powder particle size on thermoelectric performance. To improve the performance, further investigation of the microstructure of the devices is needed. In this work we studied the microstructure of grain boundaries and interfaces between electrodes and Mg₂Si sintered bodies to increase understanding of Mg₂Si thermoelectric devices.