Impact of fertilizer on a small watershed of Lake Biwa: use of sulfur and strontium isotopes in environmental diagnosis

Sulfur and strontium isotopes (delta(34)S and (87)Sr/(86)Sr) were determined in 39 river water samples collected over three different cultivation periods (April, May, and June), and in several materials used for comparison (fertilizers, detergents, soils, irrigation and agricultural waters), to evaluate the impact of fertilizers on a small agricultural watershed of Lake Biwa, in central Japan. delta(34)S values in river water decreased (from +5.8 to -2.0 per thousand) with increasing SO(4) concentrations (3.8 to 93.2 ppm) from upstream to downstream of the watershed. Comparison of river water S isotopes with those of possible source materials indicates that the enrichment of SO(4) can be attributed to the dissolution of two kinds of fertilizers: (1) compound fertilizers commonly used in this area and (2) ammonium sulfate which is applied on a small scale. In contrast, (87)Sr/(86)Sr values of river water decreased with time from April (avg. 0.71163), through May (avg. 0.71139), to June (avg. 0.71127). The tendency of the sample plots on the (87)Sr/(86)Sr vs. 1/Sr diagram suggests a time-dependent increase in the contribution of soil water to the river, which is partly affected by the Sr-bearing fertilizers. It is suggested that a maximum of 25% of dissolved Sr is derived from these fertilizers, while more than 75% of it is of rock origin. Mass balance calculations permitted us to evaluate the proportion of fertilizer contribution in each river. Combined use of S and Sr isotopes together with concentration data could be a new environmental diagnosis technique for rivers and soils in localized watersheds.     

Effect of agriculture on water quality of Lake Biwa tributaries, Japan

We investigated the effects of natural environments and human activity on Lake Biwa, central Japan. We determined the concentrations of 19 elements and the compositions of stable S and Sr isotopes in the main tributaries of the lake and compared them with the corresponding values obtained from the lake water during the circulation period. Results of a principal component analysis indicated that the components dissolved in the lower reaches of the tributaries can be divided into group 1 (HCO(3), SO(4), NO(3), Ca, Mg, Sr) and group 2 components (Cl, Br, Na, K, Ba, Rb, Cs). The concentrations of group 1 components were high in the rivers of the southern area, which is urbanized and densely populated, and the eastern area, which consists of plains where agriculture predominates, compared with the rivers of the northern and western areas, which are mostly mountainous and sparsely populated. The concentrations of group 2 components tended to be high in the river water of industrial areas. The delta(34)S values of SO(4) in the river water converged to 0+/-2 per thousand as the SO(4) concentration increased and, excluding the areas where limestone is extensively distributed, as the HCO(3) concentration increased. In particular, both the delta(34)S values (0+/-2 per thousand) and the (87)Sr/(86)Sr ratios (0.7117+/-0.0005) fell within narrow ranges in the small and medium rivers of the eastern plain area, where rice is widely grown. These values agreed respectively with the delta(34)S values of the fertilizers used in the Lake Biwa basin and the soil-exchangeable (87)Sr/(86)Sr in the eastern plain. The characteristics of water quality in the small and medium rivers of the eastern area can be explained by a model in which sulfuric, nitric, and bicarbonic acids generated by the decomposition of agricultural fertilizer and paddy rice selectively leached out alkaline-earth elements adsorbed on the soil and sediments of the plain or dissolved calcium carbonate enriched with Mg and Sr. Compared with tributary waters, the lake water was depleted in NO(3), owing to denitrification, and in Mn, owing to mineralization, which occur under the redox condition of bottom sediments. Excluding NO(3) and Mn, the compositions of both the dissolved elements and the Sr and S isotopes in the water of Lake Biwa can be approximately reproduced by simple mixing of the tributary water, indicating that these components provide effective indices for evaluating the relationship between the waters of the lake and its tributaries.     

Volume CAD—CW-complexes based approach

In this paper, we propose a novel shape and physical attribute handling system Volume-CAD designated for practical and robust use in the manufacturing process of various industries. The internal data structure ‘Kitta Cube’ is formalized by CW-complexes. Complex is a structure consisting of different dimensional items with consistency (without gap or overlaps), therefore allowing each volume comprising of a material separated by boundaries to be represented completely. Volume-CAD (VCAD¹) could be called ‘solid and fluid model’, as it goes beyond the solid model. As applications of VCAD, this paper discusses surface simplification of Kitta Cubes, cell labeling (three-dimensional coloring), and multiple-materials situation. These models can be used not only for manufacturing but also throughout the product life cycle from shipment tracking until the end of the product life cycle.     

Sulfur and strontium isotope geochemistry of tributary rivers of Lake Biwa: implications for human impact on the decadal change of lake water quality

To study the deterioration of the water quality in Lake Biwa, Japan, over the last 40 years, we measured the concentrations and isotopic ratios of sulfur and strontium of water in 41 inflowing rivers and one discharging river. The concentrations of SO4 and Sr of inflowing rivers at downstream sites were generally high in the southern urban area and in the eastern area, where a large agricultural plain is situated, but low in the northern and western areas, whose watersheds are mountainous and with low population density. SO4 and Sr concentrations are also lower at upstream sites, which are closer to mountainous areas. Thus, the inflowing river receives large amounts of SO4 and Sr as it flows across the plain, where human activity levels are high. The delta34S or 87Sr/86Sr values of most eastern rivers at downstream sites are lower than those of water in Lake Biwa, and values become more uniform as the proportion of the plain area in the watershed increases. River water in other areas has higher values of delta34S or 87Sr/86Sr than the lake water. This result indicates that the decadal decrease of delta34S and 87Sr/86Sr in the lake water has been caused mainly by the increased flux of SO4 and Sr from rivers in the eastern plain. We assume that in the plain, sulfur, nitrogen, and organic compounds induced by human activities generate sulfuric, nitric, and organic acids in the water, which accelerate the extraction of Sr from bedrocks, leading to the generation of Sr in the river water in the area.     

Contact search strategies for FEM simulation of the blow molding process

In this paper, the efficiency and accuracy of contact search algorithms for the blow molding simulation were discussed. In order to increase the efficiency of the contact search, we proposed and implemented three kinds of global search algorithms and compared them with two existing methods in terms of both formulation and CPU time. The proposed sorted moving box method was finally proved to be the most efficient one, without loss of stability. To increase the accuracy, a contact–tolerance–adjustable local search algorithm was also proposed. Successful simulation of the stretch blow molding process was given as an example. Copyright © 2000 John Wiley & Sons, Ltd.     

Development of ultra-fine-grain binderless cBN tool for precision cutting of ferrous materials

A new cutting tool was developed from ultra-fine-grain (<100 nm), binderless cubic boron nitride (cBN) material fabricated by transforming hexagonal boron nitride to cBN by means of sintering under an ultra-high pressure of 10 GPa at 1800 °C. The cutting edges of the newly developed cBN tool can be made as sharp as those of single-crystal diamond tools. In this experiment, cBN and single-crystal diamond tools of the same shape were compared by precision cutting tests using stainless steel specimens and steel specimens coated with an electroless Ni-P layer. The surface roughness (R_z) of specimen surfaces cut with the cBN tool by means of planing was approximately 100 nm for both the Ni-P-coated steel and stainless steel specimens. Though similar R_z values were obtained for Ni-P layers cut by the cBN and diamond tools, an R_z value exceeding 2000 nm was obtained for stainless steel cut by the diamond tool. High-precision surfaces with R_z values of 50–100 nm were obtained for stainless steel specimens cut with the cBN tool under high-speed milling (942 m/min) conditions. These results indicate that the newly developed cBN tool is useful for the ultra-precision or precision cutting of ferrous materials.