Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Cheese fortification using saturated monoglyceride self‐assembly structures as carrier of omega‐3 fatty acids

The purpose of this research was to study the capacity of emulsions containing saturated monoglyceride self‐assembly structures to deliver omega‐3 fatty acids in fresh soft cheese. To this aim, fortified emulsions containing different ratios of milk, saturated monoglycerides (MGs) and cod liver oil were added to milk before cheese‐making. These emulsions were characterised by distinct microstructural features observed by polarised light microscopy and apparent viscosity values. The omega‐3 delivery performance of MG emulsions highlighted that this strategy allowed a good retention of the omega‐3‐rich oil in the curd (up to 75%). The fortified cheeses showed yield value and fat content higher than those of control samples. The enriched cheese showed hardness and cohesiveness obtained by texture profile analysis similar to those of the unfortified product. Only a slight decrease in gumminess was detected in fortified cheese.     

Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Indoor body-area channel model for narrowband communications

Using wireless sensors placed on a person to continuously monitor health information is a promising new application. At the same time, new low-power wireless standards such as Bluetooth and Zigbee have been proposed for short range, low data-rate communication matching the requirements of these bio-medical applications. However, there are currently few measurements or models describing propagation around the body. To address this problem, electromagnetic waves near the torso are measured and a statistical model is derived for communication in the 915 MHz and 2.45 GHz industrial, scientific and medical bands associated with Zigbee and Bluetooth. Measurement setup and statistical analysis are described.     

A chemical method for preparation of cobalt oxide thin films

A very simple method has been developed for the preparation of cobalt oxides, CoO(OH) and Co₃O₄, thin films on glass substrates using cobalt(II) chloride and ammonia as reacting agents. These materials were characterized by optical and electrical measurements. CoO(OH) films are insulating and have DC dielectric breakdown at about 3700 V / mm when measurements are made using silver print electrodes placed at various spacings on the film. Electrical resistivity of Co₃O₄ is 2.5 ω m. Analysis of the absorption spectra shows that CoO(OH) and CO₃O₄ have optical band gaps of 2.36 eV and 1.65 eV respectively. Spectral variation of the optical constants of these materials have also been measured.     

An on-line learning algorithm for the orthogonal weight estimation of MLP

We propose an on-line learning algorithm for Multi Layered Perceptrons (MLP) with an Orthogonal Weight Estimator (OWE) architecture. Such an architecture allows to dynamically and efficiently estimate the weights of a MLP in context dependent behaviour problems. The proposed learning algorithm attempts to solve the problem of time-consuming in the learning phase encountered to train these weight estimators.     

Second-Order optical non-linearities of {4-(dimethylamino) stilben z & e 4'-yl} dimesityl borane

Samples of {4-(dimethylamino) stilben Z & E 4'-yl} dimesityl borane (BNS) were synthesised and investigated for their non-linear optical properties. The results show that the quadratic hyperpolarisability of the Z-isomer is smaller than that of the E-isomer, the beta value found for the latter being as high as 60 × 10^?30 esu.     

Inherent emf relaxation of electrochemical cells with nanocrystalline Ag electrodes

The open circuit voltage of the electrochemical cell Ag (nano)|solid silver electrolyte|Ag (macro) is found to be inherently unstable. Even under conditions which support the morphological stability of the arrangement of nanocrystalline silver, the particles grow significantly as soon as they function as electrodes; i.e. when they are in contact with a silver electrolyte and connected electronically at the same time. The process is shown to be due to electrochemical Ostwald ripening with the interfacial transfer of Ag⁺ through the Ag/electrolyte interface being the rate limiting step. Its activation energy is 0.01 eV. The decay is in good agreement with modelling results.     

A comparative study of thin film insulation techniques for gold electrodes

The increasing use of microelectrodes in small sample volumes and biological environments require the use of thin film insulators. The insulating ability of the thin film insulators electrophoretic paint, polyimide, allylphenol phenol copolymer and an epoxy dip coat have been assessed using gold wires coated in the relevant film. Insulation was assessed by recording the current from the wires in a solution of known redox couple. The effect of prolonged storage in aqueous solutions was also investigated. The most successful insulating approach, with regards to insulative ability, prolonged use in aqueous environments and speed of application, was the combination of cathodic electrophoretic paint followed by polyimide.