Estimating the Natural Illumination Conditions from a Single Outdoor Image

Given a single outdoor image, we present a method for estimating the likely illumination conditions of the scene. In particular, we compute the probability distribution over the sun position and visibility. The method relies on a combination of weak cues that can be extracted from different portions of the image: the sky, the vertical surfaces, the ground, and the convex objects in the image. While no single cue can reliably estimate illumination by itself, each one can reinforce the others to yield a more robust estimate. This is combined with a data-driven prior computed over a dataset of 6 million photos. We present quantitative results on a webcam dataset with annotated sun positions, as well as quantitative and qualitative results on consumer-grade photographs downloaded from Internet. Based on the estimated illumination, we show how to realistically insert synthetic 3-D objects into the scene, and how to transfer appearance across images while keeping the illumination consistent.     

On the geometrical dependence of low-frequency noise in SiGe HBTs

We present an investigation of the dependence of low-frequency noise on device geometry in advanced npn silicon–germanium (SiGe) heterojunction bipolar transistors (HBTs). The devices examined in this work have fixed emitter width (W_E = 0.4 μm), but varying emitter length (0.5 μm  L_E  20.0 μm), and thus the ratio of the emitter perimeter (P_E) to the emitter area (A_E) varies widely, making it ideal for examining geometrical effects. The SPICE noise parameter A_F extracted from these devices decreases with increasing L_E. Furthermore, the low-frequency noise measured on SiGe HBTs with significantly different P_E/A_E ratios suggests a possibility that the fundamental noise source for the diffusion base current may be located at the emitter periphery. Transistors with different distances between the emitter edge and the shallow trench edge (XEC), and shallow trench edge to deep trench edge (XTC), are also investigated. The SiGe HBTs with a smaller value of XEC have higher low-frequency noise, but no significant difference is found in devices with varying XTC. Explanations of the observed noise behavior are suggested.     

Comparing the growth of a molecular semiconductor on amorphous and semi-crystalline polycarbonate substrates

Polymeric substrates are of importance in plastic electronics. However, polymeric surfaces can exhibit different morphologies depending on whether they are amorphous or semi-crystalline. This work focuses on the impact of the surface structure of bisphenol A polycarbonate substrates on the nucleation and growth of a p-type semi-conductor, namely zinc phthalocyanine (ZnPc). ZnPc films were deposited under high vacuum at different substrate temperatures on oriented semi-crystalline as well as amorphous substrates of PC. The oriented substrates of PC were prepared by a method combining mechanical rubbing and solvent induced crystallization: the substrates show a periodic and regular alternation of oriented crystalline lamellae. Grazing incidence X-ray diffraction shows that the crystalline lamellae of PC have a preferential (a, c) contact plane. Moreover, the substrates show a bilayer structure made of a 60 nm-thick semi-crystalline overlayer atop an amorphous underlayer. UV–vis spectroscopy shows that the polymorphism of the ZnPc films is not modified by the surface structure of the PC substrate (amorphous versus semi-crystalline). However, the statistical analysis of domain size and density versus substrate temperature T_s evidences different apparent activation energies of the growth mechanism. High Resolution Transmission Electron Microscopy suggests that twinning along a (2 ?1 0) plane accounts for the bifurcations of the in-plane b-axis direction of the ZnPc nanocrystals. On oriented substrates of PC, such bifurcations are partly suppressed by the nanocorrugation of the surface, resulting in larger apparent domain sizes and unidirectional in-plane orientation.     

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti₃C₂T_x, producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti₃C₂T_x (AA-Ti₃C₂), exhibits higher specific capacitances, and cycling stabilities than pristine Ti₃C₂T_x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g⁻¹ (1428 mF cm⁻² and 492 F cm⁻³) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti₃C₂T_x interlayer, providing insights into the differences in the observed electrochemical behavior.     

Efficient Excitation of Hybrid Modes in a THz Clinotron

Journal of Infrared, Millimeter, and Terahertz Waves - Various regimes of hybrid, bulk-surface, modes being excited in the clinotron oscillator with a sheet electron beam and nonuniform grating...     

Spatially offset Raman microspectroscopy of highly scattering tissue: theory and experiment

Spatially Offset Raman Spectroscopy (SORS) has seen considerable interest in recent years as a tool for noninvasively acquiring Raman spectra from beneath the surface of a sample. One of the major limitations of the SORS technique is that accurate knowledge of the optical properties of the medium is required to translate an offset into a sample depth. We report on the benefits of preforming SORS using micron offset distances as opposed to the more typical millimeter offsets used. Monte Carlo simulations are used to demonstrate that at these small offsets, the results depend less on the scattering coefficient of the material. These results provide new insights into the SORS technique and will improve the practical application of SORS in the future.     

Drosophila as a Model System for Studying of the Evolution and Functional Specialization of the Y Chromosome

The Y chromosome is one of the sex chromosomes found in males of animals of different taxa, including insects and mammals. Among all chromosomes, the Y chromosome is characterized by a unique chromatin landscape undergoing dynamic evolutionary change. Being entirely heterochromatic, the Y chromosome as a rule preserves few functional genes, but is enriched in tandem repeats and transposons. Due to difficulties in the assembly of the highly repetitive Y chromosome sequence, deep analyses of Y chromosome evolution, structure, and functions are limited to a few species, one of them being Drosophila melanogaster. Despite Y chromosomes exhibiting high structural divergence between even closely related species, Y-linked genes have evolved convergently and are mainly associated with spermatogenesis-related activities. This indicates that male-specific selection is a dominant force shaping evolution of Y chromosomes across species. This review presents our analysis of current knowledge concerning Y chromosome functions, focusing on recent findings in Drosophila. Here we dissect the experimental and bioinformatics data about the Y chromosome accumulated to date in Drosophila species, providing comparative analysis with mammals, and discussing the relevance of our analysis to a wide range of eukaryotic organisms, including humans.     

Using ELP Repeats as a Scaffold for De Novo Construction of Gadolinium-Binding Domains within Multifunctional Recombinant Proteins for Targeted Delivery of Gadolinium to Tumour Cells

Three artificial proteins that bind the gadolinium ion (Gd³⁺) with tumour-specific ligands were de novo engineered and tested as candidate drugs for binary radiotherapy (BRT) and contrast agents for magnetic resonance imaging (MRI). Gd³⁺-binding modules were derived from calmodulin. They were joined with elastin-like polypeptide (ELP) repeats from human elastin to form the four-centre Gd³⁺-binding domain (4MBS-domain) that further was combined with F3 peptide (a ligand of nucleolin, a tumour marker) to form the F3-W4 block. The F3-W4 block was taken alone (E2-13W4 protein), as two repeats (E1-W8) and as three repeats (E1-W12). Each protein was supplemented with three copies of the RGD motif (a ligand of integrin αvβ3) and green fluorescent protein (GFP). In contrast to Magnevist (a Gd-containing contrast agent), the proteins exhibited three to four times higher accumulation in U87MG glioma and A375 melanoma cell lines than in normal fibroblasts. The proteins remained for >24 h in tumours induced by Ca755 adenocarcinoma in C57BL/6 mice. They exhibited stability towards blood proteases and only accumulated in the liver and kidney. The technological advantages of using the engineered proteins as a basis for developing efficient and non-toxic agents for early diagnosis of tumours by MRI as well as part of BRT were demonstrated.     

High,in Contrast to Low Levels of Acute Stress Induce Depressive-like Behavior by Involving Astrocytic,in Addition to Microglial P2X7 Receptors in the Rodent Hippocampus

Extracellular adenosine 5′-triphosphate (ATP) in the brain is suggested to be an etiological factor of major depressive disorder (MDD). It has been assumed that stress-released ATP stimulates P2X7 receptors (Rs) at the microglia, thereby causing neuroinflammation; however, other central nervous system (CNS) cell types such as astrocytes also possess P2X7Rs. In order to elucidate the possible involvement of the MDD-relevant hippocampal astrocytes in the development of a depressive-like state, we used various behavioral tests (tail suspension test [TST], forced swim test [FST], restraint stress, inescapable foot shock, unpredictable chronic mild stress [UCMS]), as well as fluorescence immunohistochemistry, and patch-clamp electrophysiology in wild-type (WT) and genetically manipulated rodents. The TST and FST resulted in learned helplessness manifested as a prolongation of the immobility time, while inescapable foot shock caused lower sucrose consumption as a sign of anhedonia. We confirmed the participation of P2X7Rs in the development of the depressive-like behaviors in all forms of acute (TST, FST, foot shock) and chronic stress (UCMS) in the rodent models used. Further, pharmacological agonists and antagonists acted in a different manner in rats and mice due to their diverse potencies at the respective receptor orthologs. In hippocampal slices of mice and rats, only foot shock increased the current responses to locally applied dibenzoyl-ATP (Bz-ATP) in CA1 astrocytes; in contrast, TST and restraint depressed these responses. Following stressful stimuli, immunohistochemistry demonstrated an increased co-localization of P2X7Rs with a microglial marker, but no change in co-localization with an astroglial marker. Pharmacological damage to the microglia and astroglia has proven the significance of the microglia for mediating all types of depression-like behavioral reactions, while the astroglia participated only in reactions induced by strong stressors, such as foot shock. Because, in addition to acute stressors, their chronic counterparts induce a depressive-like state in rodents via P2X7R activation, we suggest that our data may have relevance for the etiology of MDD in humans.     

Observation of single-walled carbon nanotubes by photoemission microscopy

Single-walled carbon nanotube networks grown on SiO₂ pillars were studied by means of scanning photoemission microscopy. The individual nanotubes or nanotube bundles growing from the pillar tops were observed in C 1s images. Band bending near catalytic Fe/nanotube contacts in an end-bonded configuration was studied by measuring C 1s spectra along the tube axes. Within our experimental resolution, no band bending was observed. This implies that the depletion width is less than the spatial resolution of the scanning photoemission microscope (90 nm) or that the amount of the band bending is less than 0.1 eV.