Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

Polyetherimide-LaNi5 composite films for hydrogen storage applications

This study investigates the preparation of polyetherimide (PEI) – LaNi₅ composites films for hydrogen storage. Prior to the polymer addition, LaNi₅ was ball-milled at different conditions (250, 350, and 450 RPM) and annealed at 500 °C for 1 h under vacuum. The composites were produced with BM-LaNi₅-350 (PEI/LaNi₅-350) and annealed BM-LaNi₅-350 (PEI/LaNi₅-350-TT). Membranes were successfully produced through solvent casting assisted by an ultrasonic bath. The particles dispersion and the film morphology did not change after hydrogenation cycles. In the H₂ sorption experiments at 43 °C and 20 bar, the films stored H₂ without incubation time; both samples reached a capacity of ~0.6 wt%. The H₂ sorption kinetics of PEI/LaNi₅-350 was comparable to that of BM-LaNi₅-350, whereas PEI/LaNi₅-350-TT presented significantly slower kinetics. LaNi₅ oxidation was hindered by PEI, showing that it can be explored to improve metal hydrides air resistance. The results demonstrated that PEI films filled with LaNi₅ are promising materials for hydrogen storage.     

Synthesis of Benzophenones and in vitro Evaluation of Their Anticancer Potential in Breast and Prostate Cancer Cells

Breast and prostate cancers are frequently treated with chemotherapy. Several novel chemicals are being reported for this purpose, particularly synthetic and natural benzophenones. This work reports the synthesis of substituted 2-hydroxybenzophenones through 1,4-conjugate addition/intramolecular cycloaddition/dehydration of nitromethane on key intermediate chromones. Structures were extensively studied by means of 2D NMR spectroscopy and single-crystal XRD. Their cytotoxicity was evaluated in vitro in two breast cancer cell lines (MDA-MB-231 and T47-D) and one prostate cancer cell line (PC3). The most potent compound exhibited good cytotoxic effects against the three cancer cell lines (IC₅₀ values ranging from 12.09 to 26.49 μm ) and induced cell-cycle retardation only on prostate cancer cells, which suggested that it might exert cell-type-specific effects.     

A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

Frequency of molecular alterations in heterozygous beta-thalassemia in southern Spain and their relation to the hematologic phenotype

INTRODUCTION: Heterozygous beta-thalassemia manifests hematologically with microcytosis, reduced red blood cell hemoglobin concentration and high hemoglobin A2 levels. Almost all molecular alterations are due to point mutations. We attempt to determinate the frequency of that mutations in the Oriental Andalusia Area, and its relationship with the hematological phenotype. PATIENTS AND METHODS: We have studied 45 heterozygous patients. DNA samples were amplified by PCR, using the printers CD7 and HI1. A 16 Kb fragment corresponding to beta globin gene was obtained and analyzed by Dot Blot assay and hybridized with allelic specific oligonucleotide (ASO) probes to detect the 6 more frequent mutations found in the South of Spain. RESULTS: Codon 39 nonsense mutation (31.1%) was the most frequent finding followed by IVS-1 NT 110 (26.7%). The relationship between hematological parameters and molecular mutations concluded that IVS-I NT 6 mutation developed a minimal anemia. DISCUSSION: From the practical point of view, this study indicates that we were able to detect more than 90% of heterozygous beta-tal. with 5 out of 6 ASO probes used in this work. Thus, our data also provides a further implication in prenatal diagnosis.     

Effects of clozapine and haloperidol on baseline levels of vacuous jaw movements in aged rats

BACKGROUND: IgE-mediated hypersensitivity to latex proteins has become a significant clinical problem over the last decade. Nursing and medical staff are at risk because of their occupational exposure to latex. AIMS: To determine the prevalence of type I hypersensitivity to latex allergens in the nursing staff of an Australian hospital. METHODS: A questionnaire which asked about symptoms associated with the use of latex gloves was completed by 140 nurses working in the Alfred Hospital (72 in general medical wards, 68 in intensive care units). Skin prick tests with eluates of five different types of latex glove as well as common aeroallergens (rye pollen and house dust mite) and banana extract were performed. RESULTS: Thirty-one nurses (22%) were skin prick test positive to at least one of the five latex glove eluates. All of these nurses were atopic, having positive skin prick tests to rye pollen or house dust mite. Symptoms of local dryness, itch and erythema associated with glove use were reported by more than half the study group, but not more frequently by those who were skin prick test positive to latex. Urticaria associated with glove use was reported more frequently by those with positive latex skin prick tests (13% vs 4%, p = 0.05). Eighty-seven per cent of the nurses who were latex skin test positive were also positive to banana extract. CONCLUSIONS: IgE-mediated hypersensitivity to latex is common in nurses working in an Australian hospital. Glove associated symptoms were frequently reported, but in most cases the symptoms were more typical of irritant or contact dermatitis rather than type I hypersensitivity reactions. However, the extent of subclinical sensitisation to latex found in this study suggests that symptomatic latex allergy is likely to emerge as an increasing problem for nursing staff in this country.     

An extensively modified version of MolScript that includes greatly enhanced coloring capabilities

Owing to its flexibility, MolScript has become one of the most widely used programs for generating publication-quality molecular graphics. Integration with the Raster3D package, to allow the production of photorealistic rendered images, has increased its popularity still further. However, this intensive use has shown the need for enhancement of some areas of the program, especially for controlling the coloring of atoms, bonds, and molecules. This work describes a heavily modified version of MolScript that has added syntax for describing complicated coloring schemes and also has new graphics commands. Enhancements include drawing split-bond ball-and-stick models, smoothly varying the color of molecules (color ramping), abrupt color changes within secondary structural units, and the creation of dashed bonds. Making use of these added features is simple because all MolScript syntax is still supported and one typically needs only to add a few control commands. The final section of this article suggests some uses for this modified MolScript and provides illustrative examples.