Numerical Simulation and Validation of Ozone Concentration Profile in Green Gram (Vigna radiate) Bulks

The new fumigant ozone offers an alternative to contact insecticides such as phosphine and methyl bromide as a grain fumigant. This study was carried out to test the flow characteristics of ozone from points of release to the available concentration of ozone to kill pests at other areas along the storage bin. A mass transfer model which predicts ozone concentration as a function of time was applied along with continuity equation to simulate the ozone transfer in a storage bin. Ozone exchange rate based on grain bed thickness was taken into account and evaluated using the correlation developed during the experiment. The relative error between the experimental and predicted ozone concentration values for the entire bin geometry was less than 25.7%. Overall, the general trends of measured ozone concentration were compatible with the simulated ones.     

Ionic liquid mediated synthesis of silica/polystyrene core–shell composite nanospheres by radical dispersion polymerization

This report describes the novel preparation of silica/polystyrene (SiO₂/PS) core–shell composite nanospheres by in situ radical dispersion polymerization in an ionic liquid (IL). Silica nanoparticles were first surface modified by the silane coupling agent methacryloxypropyltrimethoxysilane (MPTMS), which is capable of copolymerizing with styrene and provided a reactive CC bond. Transmission electron microscopy (TEM) revealed core–shell morphology with smooth surfaces. X-ray photoelectron spectroscopy (XPS) analysis demonstrated that almost all of the SiO₂ nanoparticles were encapsulated by the polymer. The composite particles were also analyzed by FT-IR spectroscopy and thermogravimetric analysis (TGA). In principle, this simple and environmentally-friendly synthetic procedure can be employed to prepare other inorganic oxide-containing polymer composites.     

Effect of imbibed moisture on monotonic and low-velocity impact behavior of injection over-molded short/continuous fiber reinforced polypropylene composites

Design of automotive components with over-molded short/continuous fiber reinforced thermoplastic composites necessitates understanding of their behavior under extreme outdoor conditions. The short, quasi-isotropic and over-molded short/continuous glass fiber reinforced polypropylene (PP) composite specimens were prepared as per standard and immersed in water until equilibration to study their relative moisture absorption characteristics and consequent mechanical behavior. As the absorbed moisture mostly occupied the interface between fiber and matrix in laminated composite inserts and moisture absorption of short fiber composite core is insignificant, the moisture absorption of over-molded composites is just above 50% of that of laminated composites. The flexural, interlaminar shear and impact behavior of equilibrated composites is primarily governed by the quantum of imbibed moisture of composite materials. Optical analysis of failed moisture equilibrated over-molded specimens showed a marginal delamination between plies of the inserts without any perceptible damage within the short fiber composite similar to dry as molded specimens.     

Effect of Fiber Bridging Stress on the Fracture Resistance of Silicon-Carbide-Fiber/Zircon Composites

The room-temperature fracture-resistance behavior ( R -curve) of unidirectional silicon-carbide-fiber-reinforced zircon-matrix composites has been studied experimentally and numerically. The composites showed strong rising R -curve behavior from experimental results that used in situ crack-length measurements taken via optical microscopy as well as the compliance method. A numerical calculation, based on the available models, then was performed to determine the bridging-stress function from the experimental R -curve. In addition, the effect of the residual stress and constituent properties on the bridging-stress function also has been considered in the numerical calculations. These results have indicated that the bridging-stress function, which controls the fracture resistance of ceramic composites, can be obtained from the carefully measured R -curve.     

A simple and facile method to synthesize Co3O4 nanoparticles from metal benzoate dihydrazinate complex as a precursor

This report describes the novel synthesis of cobalt oxide (Co₃O₄) nanoparticles from corresponding metal benzoate dihydrazinate complex as a precursor followed by thermal decomposition. Transmission electron microscopy (TEM) revealed nearly uniform nanoparticles with an average particle size of around 20 nm. X-ray diffraction (XRD) and selected-area electron diffraction (SAED) demonstrated that the nanoparticles were composed of pure cubic phase polycrystalline Co₃O₄. The nanoparticles were also confirmed by Raman spectroscopy. In principle, this simple and inexpensive synthetic procedure can be employed to prepare other transition metal oxide nanoparticles.     

A review on thermal energy storage systems in solar air heaters

The drying needs of agricultural, industrial process heat requirements and for space heating, solar energy is one of the prime sources which is renewable and pollution free. As the solar energy is inconsistent and nature dependent, more often there is a mismatch between the solar thermal energy availability and requirement. This drawback could be addressed to an extent with the help of thermal energy storage systems combined with solar air heaters. This review article focuses on solar air heaters with integrated and separate thermal energy storage systems as well as greenhouses with thermal storage units. A comprehensive study was carried out in solar thermal storage units consisting of sensible heat storage materials and latent heat storage materials. As the phase change heat storage materials offer many advantages over the sensible heat storage materials, the researchers are more interested in this system. The charging and discharging characteristics of thermal storage materials with various operational parameters have been reported. All the possible solar air heater applications with storage units have also been discussed.     

Editorial: Big Data Innovation for Sustainable Cognitive Computing

Mobile Networks and Applications -     

Thermal stress and probability of failure analyses of functionally graded solid oxide fuel cells

Thermal stresses and probability of failure of a functionally graded solid oxide fuel cell (SOFC) are investigated using graded finite elements. Two types of anode-supported SOFCs with different cathode materials are considered: NiO-YSZ/YSZ/LSM and NiO-YSZ/YSZ/GDC-LSCF. Thermal stresses are significantly reduced in a functionally graded SOFC as compared with a conventional layered SOFC when they are subject to spatially uniform and non-uniform temperature loads. Stress discontinuities are observed across the interfaces between the electrodes and the electrolyte for the layered SOFC due to material discontinuity. The total probability of failure is also computed using the Weibull analysis. For the regions of graded electrodes, we considered the gradation of mechanical properties (such as Young’s modulus, the Poisson’s ratio, the thermal expansion coefficient) and Weibull parameters (such as the characteristic strength and the Weibull modulus). A functionally graded SOFC showed the least probability of failure based on the continuum mechanics approach used herein.     

An Efficient Privacy-Preserving ID Centric Authentication in IoT Based Cloud Servers for Sustainable Smart Cities

Wireless Personal Communications - Smart cities or Smart societies require Internet of Things (IoT), for connecting numerous devices to enormous asset pools in cloud computing. This coordination of...