Influence of the dispersion of Nanoclays on the cellular structure of foams based on polystyrene

In the present work blends of polystyrene (PS) with sepiolites have been produced using a melt extrusion process. The dispersion degree of the sepiolites in the PS has been analyzed by dynamic shear rheology and X-ray micro-computed tomography. Sepiolites treated with quaternary ammonium salts (O-QASEP) are better dispersed in the PS matrix than natural sepiolites (N-SEP) or sepiolites organo-modified with silane groups (O-SGSEP). A percolated network is obtained when using 6.0 wt% of O-QASEP, 8.0 wt% of N-SEP and 10.0 wt% of O-SGSEP. It has been shown that multiple extrusion processes have a negative effect on the polymer architecture. They produce a reduction in the length of the polymeric chains, and they do not lead to a better dispersion of the particles in the polymer matrix. Foams have been produced using a gas dissolution foaming process, where a strong effect of the dispersion degree on the cellular structure of the different foams was found. The effects on the cellular structure obtained by using different types of sepiolites, different contents of sepiolites and different extrusion conditions have been analyzed. The foams produced with the formulations containing O-QASEP present the lowest cell size and the most homogeneous cellular structures.     

Squamous cell carcinoma of the prostate: case report and review of literature

Carcinoma of the prostate, that is adenocarcinoma, is one of the most common malignancies in the male with an estimated incidence for 1991 of 122,000 new cases. On the other hand, squamous cell carcinoma of the prostate, with a median incidence of .5%-1% of all prostatic malignancies, has a similar clinical presentation but differs in treatment response and prognosis. We herein present one case of this histological pattern and review the literature pertaining to it.     

Cascade damage evolution: rate theory versus kinetic Monte Carlo simulations

The thermal evolution of defects produced by ion irradiation is studied by kinetic Monte Carlo and Rate Theory approaches. An isochronal annealing is simulated to evidence the different thermally activated mechanisms that govern defect evolution. KMC simulations show that in the case of ion irradiation, additional recovery peaks should be expected, in comparison to electron irradiation conditions. A comparison between kMC and RT results indicates that some of these peaks are due to spatially – correlated recombinations that occur at low temperature. Therefore kMC and RT approaches differ at low temperature. However, at higher temperature results obtained by both models are in near perfect agreement. In addition, we studied the influence of vacancy cluster mobility on the evolution of damage. KMC simulations show that the mobility of V₂, V₃ and V₄ clusters does not significantly affect the evolution of defects and can be neglected in these conditions.     

Red-green colour blindness in the Tormes-Alberche Valley (Avila-Central Spain)

A population from a Central Spanish region (Tormes-Alberche Valley) has been investigated for the presence of red-green colour vision defects. A sample of 998 subjects (469 male and 529 female) was analyzed. To identify colour vision defects, Ishihara test plates were used. The red-green colour blindness percentage obtained was 4.69 +/- 0.976% for males (2.13% protan and 2.56% deutan types) and none of the females tested were found to be colour blind. These results are within the variation range of Mediterranean populations and lower than the usual frequencies among non-Mediterranean European samples.     

Kinetics of simultaneous two-phase precipitation in the Fe-C system

A theoretical approach for the interpretation of the kinetics of simultaneous stable and metastable phase precipitation in a binary system is proposed. The model, based on the nucleation and growth theory, defines a critical size different for each phase. The size of the clusters evolves by adding or substracting a single atom one at a time. A set of coupled differential equations is obtained for the chemical rate whose solution reproduces the kinetics of thermoelectric power measurements in the Fe-C multiphase system. Suppositions about the growing and dissolution rate constants reduce the size of the equation system with a gain in computation time.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.     

Effects of organic farming on minerals contents and aroma composition of Clemenules mandarin juice

Consumers demand organic products because they believe that the organic products are more flavorful and respectful to the environment and human health. The effects of organic farming on the minerals contents and aroma composition of Clemenules mandarin juices were studied. Minerals (Fe, Cu, Mn, Zn, Ca, Mg, K, and Na) were quantified using atomic absorption-emission spectroscopy, while volatile compounds were extracted using the dynamic headspace technique and were identified and quantified by GC–MS. In general, organic farming produced a mandarin juice with a higher quality than that produced by conventional agricultural practices. Higher concentrations of both minerals and positive volatile compounds were found in the organic juice, while the formation of off-flavors was higher in the conventional juice, although threshold values were not reached.