Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

LPNN-based approach for LASSO problem via a sequence of regularized minimizations

In compressive sampling theory, the least absolute shrinkage and selection operator (LASSO) is a representative problem. Nevertheless, the non-differentiable constraint impedes the use of Lagrange programming neural networks (LPNNs). We present in this article the -LPNN model, a novel algorithm that tackles the LASSO minimization together with the underlying theory support. First, we design a sequence of smooth constrained optimization problems, by introducing a convenient differentiable approximation to the non-differentiable -norm constraint. Next, we prove that the optimal solutions of the regularized intermediate problems converge to the optimal sparse signal for the LASSO. Then, for every regularized problem from the sequence, the -LPNN dynamic model is derived, and the asymptotic stability of its equilibrium state is established as well. Finally, numerical simulations are carried out to compare the performance of the proposed -LPNN algorithm with both the LASSO-LPNN model and a standard digital method.     

RELAP5/3.2 assessment against low pressure onset of flow instability in parallel heated channels

Best Estimate computer codes have been, so far, developed for safety analysis of nuclear power plants and were extensively validated against a large set of separate effects and integral test facilities experimental data relevant to such kind of reactors. Their application to research reactors is not fully straightforward. Modelling problems generally emerge when applying existing models to low pressure and more particularly to subcooled flow boiling situations. The objective of the present work is to investigate the RELAP5/3.2 system code capabilities in predicting phenomena that could be encountered under abnormal research reactor’s operating conditions. For this purpose, the separate effect related to the static onset of flow instability is investigated. The cases considered herein are the flow excursion tests performed at the Oak Ridge National Laboratory thermal hydraulic test loop (THTL) as well as some representative Whittle and Forgan (W & F) experiments. The simulation results are presented and the capabilities of RELAP5/Mod 3.2 in predicting this critical phenomenon are discussed.     

On colloid-chemical properties of some polymer composites

The influence of the vibrowave action on the properties of some disperse systems used in the textile industry has been considered. It has been noted that excitation of nonlinear oscillation in the audio band under resonant conditions leads to an increase in the degree of dispersion of distributed systems and an increase in their colloid stability. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 79, No. 1, pp. 133–138, January–February, 2006.     

Study of the solid-liquid equilibria in the LiPO3-Y(PO3)3 binary system

The LiPO₃-Y(PO₃)₃ system has been studied for the first time. Microdifferential thermal analysis (μ-DTA), infrared spectroscopy (IR) and X-ray diffraction were used to investigate the liquidus and solidus relations. The only new compound observed within this system is LiY(PO₃)₄, melting incongruently at 1104 K. An eutectic appears at 4±1 mol% Y(PO₃)₃ at 933 K. LiY(PO₃)₄ crystallizes in the monoclinic system C_2/c with a unit cell: a=16.201(4) Å, b=7.013(2) Å, c=9.573(2) Å, β=125.589(9)°, Z=4 and V=884.5 Å³, which is isostructural to LiNd(PO₃)₄. The infrared absorption spectrum indicates that this salt is a chain polyphosphate.     

Dynex: multiplex ELISA technology

Conventional enzyme-linked immunosorbent assay (ELISA) is a gold standard for screening antibodies and testing for protein or antigen presence. A significant limitation of this assay resides in the fact that only one analyte can be assessed per microplate well. Here, we describe and investigate a new technology consisting of an automated ELISA system in which up to 10 analytes can be measured within one single well, thus improving productivity, accuracy, and repeatability by reducing the amount of human labor required. Another strength of the platform is that a user can load any necessary sets/subsets of beads to perform required assays, with improved flexibility compared to manufactured-loaded arrays for multiplex analysis. We also demonstrate that this system can be used to determine the pathogenicity (i.e., presence of Shiga toxins) and serotype (i.e., Escherichia coli O157) of E. coli isolates.     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Properties of Co-doped N-type FeSi2 processed by mechanical alloying

Iron-silicide was produced with a mechanical alloying process and consolidated through vacuum hot pressing. The as-milled powders were of metastable state and fully transformed into the ß-FeSi₂ phase through subsequent isothermal annealing. The as-consolidated iron silicides consisted of an untransformed mixture of α-Fe₂Si₅ and ?-FeSi phases and a partially transformed β-FeSi₂ phase was found in the low density compact. Isothermal annealing was carried out to induce transformation into a thermoelectric semiconducting β-FeSi₂ phase. The transformation behavior of the β-FeSi₂ was investigated utilizing DTA, SEM, and XRD analyses. Isothermal annealing at 830°C in vacuum led to a thermoelectric semiconducting β-FeSi₂ phase transformation, but some residual metallic α and ?-phases were unavoidable even after 96 hours of annealing. The iron silicide microstructures were investigated using SEM and TEM. The mechanical and thermoelectric properties of the β-FeSi₂ materials before and after isothermal annealing are characterized in this study.     

PRIVACY LEAKAGE IN HEALTH SOCIAL NETWORKS

Members of health social networks may be susceptible to privacy leaks by the amount of information they leave behind. The threat to privacy increases when members of these networks reuse their pseudonyms in other social networks. The risk of re‐identifying users from such networks requires quantitative estimates to evaluate its magnitude. The estimates will enable managers and members of health social communities to take corrective measures. We introduce a new re‐identification attack, the social network attack, that takes advantage of the fact that users reuse their pseudonyms. To demonstrate the attack, we establish links between MedHelp and Twitter (two popular social networks) based on matching pseudonyms. We used Bayesian networks to model the re‐identification risk and used stylometric techniques to identify the strength of the links. On the basis of our model 7‐11. 8% of the MedHelp members in the sample population who reused their pseudonyms in Twitter were re‐identifiable compared with 1% who did not. The risk estimates were measured at the 5% risk threshold. Our model was able to re‐identify users with a sensitivity of 41% and specificity of 96%. The potential for re‐identification increases as more data is accumulated from these profiles, which makes the threat of re‐identification more serious.