Effect of age and gender on the processing characteristics of buffalo meat

Comparison of processing characteristics of meat from young male, spent male and spent female buffaloes was made to find the suitability of the meat for developing ready to eat meat products. Intensively reared young male buffalo meat showed higher moisture, collagen solubility, sarcomere length, myofibrillar fragmentation index and water holding capacity than meat from the other animals. A higher pH, total meat pigments, salt soluble protein, emulsifying capacity and lower collagen solubility were observed in spent male buffalo meat. Spent female buffalo meat had higher fat, total collagen, muscle fibre diameter and shear force value. Sensory evaluation of pressure cooked meat chunks indicated a marked toughness in spent male and female buffalo meat samples. These results suggest that young male buffalo meat is more suitable for processing in chunks and spent male and female buffalo meat is more suitable for processing in smaller particles.     

Influence of Coating Parameter and Sintering Atmosphere on the Corrosion Resistance Behavior of Electrophoretically Deposited Composite Coatings

The purpose of this study is to synthesize and characterize nanosized titania (TiO₂), zinc oxide (ZnO), and its composite coating on Ti–6Al–4V to enhance its corrosion protection behavior in Ringer's solution. Nanosized powders of TiO₂ and ZnO was characterized by Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and scanning electron microscopy - energy dispersive atomic spectroscopy (SEM-EDAX) analysis. As a result of antibacterial activity, both ZnO and TiO₂/ZnO have produce remarkable inhibition zone on Escherichia coli. The antibacterial activity of composites are due to the combined effect of ZnO on TiO₂. The adherence and surface uniformity of TiO₂/ZnO composite film on titanium implant was examined by optical microscopy and Vickers microhardness test. Corrosion resistant behavior of the coating on titanium implant was investigated by tafel polarization and impedance analysis. The composite coatings on Ti–6Al–4V have produced improved corrosion resistance with a pronounced shift in the anodic corrosion potential (E_corr) with a corresponding less corrosion current density (I_corr) compared to monophase coating. Similar results have been obtained for impedance analysis which indicated a reduction in double layer capacitance (C_dl) and with enhancement in charge transfer resistance (R_ct). These observations suggest improved corrosion resistance property of TiO₂/ZnO composite coating on Ti–6Al–4V.     

Biological hydrogen production from probiotic wastewater as substrate by selectively enriched anaerobic mixed microflora

Biohydrogen production from probiotic wastewater using mixed anaerobic consortia is reported in this paper. Batch tests are carried out in a 5.0 L batch reactor under constant mesophillic temperature (37 °C). The maximum hydrogen yield 1.8 mol-hydrogen/mol-carbohydrate is obtained at an optimum pH of 5.5 and substrate concentration 5 g/L. The maximum hydrogen production rate is 168 ml/h. The hydrogen content in the biogas is more than 65% and no significant methane is observed throughout the study. In addition to hydrogen, acetate, propionate, butyrate and ethanol are found to be the main by-products in the metabolism of hydrogen fermentation.     

A new method for reducing DNL in nuclear ADCs using an interpolation technique

The paper describes a new method for reducing the DNL associated with nuclear ADCs. The method named the “interpolation technique” is utilized to derive the quantisation steps corresponding to the last n bits of the digital code by dividing quantisation steps due to higher significant bits of the DAC, using a chain of resistors. Using comparators, these quantisation steps are compared with the analog voltage to be digitized, which is applied as a voltage shift at both ends of this chain. The output states of the comparators define the n bit code. The errors due to offset voltages and bias currents of the comparators are statistically neutralized by changing the polarity of quantisation steps as well as the polarity of analog voltage corresponding to last n bits) for alternate A/D conversion. The effect of averaging on the channel profile can be minimized. A 12 bit ADC was constructured using this technique which gives DNL of less than ±1% over most of the channels for conversion time of nearly 4.5 μs. Gatti's sliding scale technique can be implemented for further reduction of DNL. The interpolation technique has a promising potential of improving the resolution of existing 12 bit ADCs to 16 bit, without degrading the percentage DNL significantly.     

A new method for nuclear ADCs using the vernier approximation technique

The paper describes a new method of analog-to-digital conversion. The method named the vernier approximation technique utilizes two scales made of chains of resistors sliding over each other, one being called the main scale and the other the vernier scale. The vernier scale is moved by applying the input analog voltage as a voltage shift at both ends. This voltage shift is digitized using the comparators connected between the corresponding points on main and vernier scales. All the quantization steps are derived from a single quantization step using the process of sliding and vernier scaling resulting in high differential linearity. The scheme uses a balancing technique to balance the points on the main scale with the corresponding points on the vernier scale. The scheme works with the speed of a “sequential parallel approximation technique” giving a higher speed of operation than either the Wilkinson technique or the successive approximation technique used for nuclear ADCs. The technique gives high accuracy even with use of ordinary components such as 1% resistors.     

Effect of different binders on the quality of enrobed buffalo meat cutlets and their shelf life at refrigeration storage (4±1°C)

To enhance the binding and quality of enrobed buffalo meat cutlets (EBMC), a meat emulsion at 0%, 15%, 20% and 25% replaced the cooked meat in the formulation. Emulsion containing products had significantly higher moisture contents and texture scores compared to the control. Emulsion at 20% level could be incorporated in enrobed buffalo meat cutlets to enhance their quality. Addition of 1% egg white powder improved the quality of EBMC compared to control, while a 3% level had adverse effect on the sensory attributes despite giving higher product yield and lower shrinkage. Cutlets with refined wheat flour had significantly higher protein and fat contents. It had also higher acceptability followed by corn flour, potato starch and tapioca flour. TBARS of enrobed samples remained lower than controls throughout the storage period. Mesophilic count remained below log3cfu/g for both samples during storage. Uncoated products and enrobed products were acceptable up to 10th and 15th day, respectively. Enrobing of buffalo meat cutlets improved their acceptability and shelf life under refrigeration storage.     

Highly sensitive and selective dynamic light-scattering assay for TNT detection using p-ATP attached gold nanoparticle

TNT is one of the most commonly used nitro aromatic explosives for landmines of military and terrorist activities. As a result, there is an urgent need for rapid and reliable methods for the detection of trace amount of TNT for screenings in airport, analysis of forensic samples, and environmental analysis. Driven by the need to detect trace amounts of TNT from environmental samples, this article demonstrates a label-free, highly selective, and ultrasensitive para-aminothiophenol (p-ATP) modified gold nanoparticle based dynamic light scattering (DLS) probe for TNT recognition in 100 pico molar (pM) level from ethanol:acetonitile mixture solution. Because of the formation of strong π-donor-acceptor interaction between TNT and p-ATP, para-aminothiophenol attached gold nanoparticles undergo aggregation in the presence of TNT, which changes the DLS intensity tremendously. A detailed mechanism for significant DLS intensity change has been discussed. Our experimental results show that TNT can be detected quickly and accurately without any dye tagging in 100 pM level with excellent discrimination against other nitro compounds.     

Anti-microbial and anti-corrosive poly (ester amide urethane) siloxane modified ZnO hybrid coatings from Thevetia peruviana seed oil

The utilization of renewable resources for the development of organic coatings is a viable means of creating alternatives to petroleum-based chemicals which are not eco-friendly. This paper reports the synthesis of polyesteramide–urethane–silica–zinc oxide hybrid coatings from Thevetia peruviana seed oil (TPSO). The periphery of ZnO nano-particles is modified with 3-aminopropyltrimethoxysilane to prepare silica grafted ZnO composite particles. The TPSO based polyesteramide was reacted with 4,4′-diisocyanatodicyclohexylmethane in presence of siloxane modified ZnO to obtain –NCO terminated polyesteramide–urethane–silica ZnO prepolymer. These hybrid pre-polymers were casted on tin foil and cured under atmospheric moisture to obtain eco-friendly, moisture cured polyesteramide–urethanes–silica–zinc oxide hybrid coating films. The synthesized polyester and polyurethane formation was confirmed by using FT-IR and NMR spectroscopic techniques. The resultant hybrid coating films were characterized by using FT-IR, TGA, DSC, SEM, corrosion resistance and microbial resistance. Results confirm that with increase of siloxane modified ZnO content in the polyurethane matrix thermal stability, glass transition temperature and corrosion resistance improved. The antibacterial activity shows that the hybrid films exhibit excellent resistance towards Escherichia coli and Staphylococcus aureus. The salt spray test on coated panel samples show good corrosion resistance properties.     

Tenderization of buffalo meat using plant proteases from Cucumis trigonus Roxb (Kachri) and Zingiber officinale roscoe (Ginger rhizome)

This study was conducted to develop a method for improving tenderness and overall qualities of tough buffalo meat using plant proteolytic enzymes from Cucumis trigonus Roxb (Kachri) and Zingiber officinale roscoe (Ginger rhizome). Their tenderizing efficacy was compared with the most popular enzyme papain. 3×3×3 cm chunks from Biceps femoris muscles of spent Murrah buffaloes (4-5 years age) were marinated with distilled water (control), 2% (w/w) powdered cucumis extract, 5% (w/v) ginger extract or 0.2% (w/w) papain for 48 h at 4 °C and subjected to various physico-chemical, histological and sensory evaluations. An increase (p<0.01) in collagen solubility, sarcoplasmic and myofibrillar protein solubility, and reduction (p<0.01) in shear force values were observed in all enzyme-treated samples compared to control. Electrophoretic pattern of muscle proteins also revealed extensive proteolysis and reduction in number of protein bands in all treated samples. Improvement (p<0.01) in flavor, juiciness, tenderness and overall acceptability scores were observed in all enzyme-treated samples compared to controls. Ginger extract-treated meat samples received better scores for appearance, flavor, tenderness and overall acceptability. From these results, it is shown that ginger and cucumis can be used as an effective alternative to papain.