Formulation of sage essential oil (Salvia officinalis,L.) monoterpenes into chitosan hydrogels and permeation study with GC-MS analysis

This study deals with the formulation of natural drugs into hydrogels. For the first time, compounds from the sage essential oil were formulated into chitosan hydrogels. A sample preparation procedure for hydrophobic volatile analytes present in a hydrophilic water matrix along with an analytical method based on the gas chromatography coupled with the mass spectrometry (GC-MS) was developed and applied for the evaluation of the identity and quantity of essential oil components in the hydrogels and saline samples. The experimental results revealed that the chitosan hydrogels are suitable for the formulation of sage essential oil. The monoterpene release can be effectively controlled by both chitosan and caffeine concentration in the hydrogels. Permeation experiment, based on a hydrogel with the optimized composition [3.5% (w/w) sage essential oil, 2.0% (w/w) caffeine, 2.5% (w/w) chitosan and 0.1% (w/w) Tween-80] in donor compartment, saline solution in acceptor compartment, and semi-permeable cellophane membrane, demonstrated the useful permeation selectivity. Here, (according to lipophilicity) an enhanced permeation of the bicyclic monoterpenes with antiflogistic and antiseptic properties (eucalyptol, camphor and borneol) and, at the same time, suppressed permeation of toxic thujone (not exceeding its permitted applicable concentration) was observed. These properties highlight the pharmaceutical importance of the developed chitosan hydrogel formulating sage essential oil in the dermal applications.     

Lignin from Annual Plants as Raw Material Source for Flavors and Basic Chemicals

The enzymatic conversion of lignins, possibly in combination with electrochemical oxidation, makes aromatics such as syringol, guaiacol, vanillin and catechol available in the qualities required by the fragrance industry. The lignins were obtained by soda digestion from wheat straw and Miscanthus, characterized and then converted with laccases. The overall yield amounted up to 9 wt % with a product spectrum confined to four substances. Catechol was the major product, with a fraction of ≈75 %. It can easily be isolated by extraction with acetone.     

Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

Adaptive motion control using neural network approximations

In this paper, we present a new adaptive technique for tracking control of mechanical systems in the presence of friction and periodic disturbances. Radial Basis Functions (RBFs) are used to compensate for the effects of nonlinearly occurring parameters in the friction and periodic disturbance model. Theoretical analysis, such as stability and transient performance, is provided. Furthermore, the performance of the adaptive RBF controller and its non-adaptive counterpart are compared.     

Ozonation of Two Acidic Azo Dyes with Different Substituents

The ozonation of two differently substituted azo dyes (Schwarz GRS and Orange Acid 8) in water media is studied. The influence of pH on the effectiveness of the ozonation at various initial concentrations of each dye is explored. It was found out that the rates of decolorization for amino-group substituted dyes reflect the considerable influence by the widely varying initial pH from 4.5 to 10. Specifically, the highest effect of decolorization of this dye was obtained at the highest pH studied (pH 10) for all initial concentrations of the solutions. Considering the dye without an amino-group substitute, the rates of color disappearance in ozonation reflected to a lower degree the variations of the initial pH. Pseudo-first-order trends of decolorization were observed in all the experimental runs. Regarding the kinetic results obtained, an attempt to explain the different dyes reactivity was made based on the absolute electronegativity (E_lumo + E_homo) of both dyes. The COD/BOD analysis shows that the ozonation of both azo dyes can reduce the sample COD but it could not improve the biodegradability ratio (BOD₅/COD). BOD decrease with ozonation time indicates that the intermediates of the ozonation are of lower biodegradability. Oxalic acid was found as the final product of ozonation of both dyes.     

Topology preservation of template-based 6-subiteration reduction operations

Generally, a reduction operation (e.g., thinning and shrinking) on 3D binary images can be represented as a set of reduction templates where every object voxel of the image satisfying any template is turned to a background voxel. Generally, it is rather difficult, error-prone and time-consuming for verifying the topological soundness of a 3D parallel reduction operation. This paper proposes sufficient conditions of time complexity O(n) for verifying the topological soundness of 3D parallel 6-subiteration reduction operations of n templates where such a kind of 3D reduction operations is performed alternatively from the six orthogonal directions to turn object voxels to background voxels. By such sufficient conditions, the topology soundness of a 3D 6-subiteration parallel reduction operation can be verified by checking each and every of its templates.     

Control of discrete time nonlinear systems with a time-varying structure

In this paper, we present a control methodology for a class of discrete time nonlinear systems that depend on a possibly exogenous scheduling variable. This class of systems consists of an interpolation of nonlinear dynamic equations in strict feedback form, and it may represent systems with a time-varying nonlinear structure. Moreover, this class of systems is able to represent some cases of gain scheduling control, Takagi-Sugeno fuzzy systems, as well as input-output realizations of nonlinear systems which are approximated via localized linearizations. We present two control theorems, one using what we call a “global” approach (akin to traditional backstepping), and a “local” approach, our main result, where backstepping is again used but the control law is an interpolation of local control terms. An aircraft wing rock regulation problem with varying angle of attack is used to illustrate and compare the two approaches.