Innovative circuit board level routing designs for BGA packages

Advances in the performance of electronic devices have resulted in high input/output counts both at the chip and the package level, which has led to the development of new packaging technologies that can accommodate these high counts. This paper presents and analyzes a novel method for the placement of ball grid array (BGA) bonding pads and routing wires on printed circuit boards to maximize signal density, which ultimately reduces the number of circuit board layers needed for routing. This method has been termed as the "balls shifted as needed" method and all the ball placement/trace routing designs shown in this paper are based on this method. We also present a performance metric defined as the number of balls routed out divided by the area of package footprint on the circuit board, and we compare various placement/routing schemes using this method.     

A Simple D 2-Sampling Based PTAS for k-Means and Other Clustering Problems

Given a set of points \(P \subset\mathbb{R}^{d}\) , the k-means clustering problem is to find a set of k centers \(C = \{ c_{1},\ldots,c_{k}\}, c_{i} \in\mathbb{R}^{d}\) , such that the objective function ∑ _x∈P e(x,C)², where e(x,C) denotes the Euclidean distance between x and the closest center in C, is minimized. This is one of the most prominent objective functions that has been studied with respect to clustering. D ²-sampling (Arthur and Vassilvitskii, Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) is a simple non-uniform sampling technique for choosing points from a set of points. It works as follows: given a set of points \(P \subset\mathbb{R}^{d}\) , the first point is chosen uniformly at random from P. Subsequently, a point from P is chosen as the next sample with probability proportional to the square of the distance of this point to the nearest previously sampled point. D ²-sampling has been shown to have nice properties with respect to the k-means clustering problem. Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) show that k points chosen as centers from P using D ²-sampling give an O(logk) approximation in expectation. Ailon et al. (NIPS, pp. 10–18, 2009) and Aggarwal et al. (Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques, pp. 15–28, Springer, Berlin, 2009) extended results of Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) to show that O(k) points chosen as centers using D ²-sampling give an O(1) approximation to the k-means objective function with high probability. In this paper, we further demonstrate the power of D ²-sampling by giving a simple randomized (1+?)-approximation algorithm that uses the D ²-sampling in its core.     

Performance of orthogonal frequency division multiplexing based M-ary quadrature amplitude modulation in asymmetrical dual-hop mixed RF-FSO transmission system

This paper investigates the performance of a dual-hop mixed relay system with radio frequency (RF) and free-space optics (FSO) communication under the effect of pointing error (PE) and atmospheric turbulence (AT). This paper considers a system where RF and FSO links are cascaded. The RF link is modeled by Nakagami-m fading, and the FSO link is modeled as gamma–gamma (G-G) fading channel. Both the channel models use orthogonal frequency division multiplexing (OFDM) with M-ary quadrature amplitude modulation (QAM). The expressions for probability density function, cumulative distribution function, signal-to-noise ratio, and ergodic capacity are derived. The moment generating function (MGF) of fading and the bit error rate (BER) of the OFDM-based M-ary QAM scheme is derived in terms of Meijer's G-function. It has been observed that, in fixed gain relay systems, the modulation scheme's BER is dominated by the SNR of the RF link. While in a variable gain relay system, the turbulence conditions of the FSO system affect the SNR and the BER of the modulation method. The feasibility of heterodyne detection and intensity modulation direct detection (IM/DD) is analyzed in terms of outage probability and ergodic capacity. The results can be used to choose the optimal modulation order and relay system for QAM-OFDM-based optical wireless systems.     

Experimental deformation analysis of an adhesively bonded multi-material joint for marine applications

The strength and deformation of full-scale adhesively bonded multi-material joints is studied in this paper. Four joints with a thick layer of methyl methacrylate adhesive (MMA) have been manufactured in shipyard conditions. In two specimens, cracks have been introduced at steel–adhesive and composite–adhesive interfaces. One cracked and one un-cracked specimen were subjected to quasi-static tensile testing; the two remaining specimens were stepwise loaded/unloaded with increasing load until failure. The strain in the adhesive layers was measured with digital image correlation (DIC). This showed a predominant shear deformation and dissimilar shear strain patterns for different bond lines. Fibre Bragg (FBG) sensors were used to monitor strains at steel and composite constituents and to detect the onset and evolution of damage in the un-cracked specimen. Strains measured by FBG sensors correspond well with DIC results at nearby regions. All specimens failed by delamination of the composite panel near the composite–adhesive interface.     

Distortion in a 2-D scan pattern generated by combining a plane mirror and a regular polygon scanner

The distortion in a 2-D scan pattern generated by a system of a plane mirror and a regular polygon scanner was investigated using the matrix formulation of reflection by plane mirrors. A particular configuration involving the two scan elements was identified which does not introduce any distortion in its 2-D scan pattern.     

Hardystonite improves biocompatibility and strength of electrospun polycaprolactone nanofibers over hydroxyapatite: A comparative study

The aim of this study was to compare physico-chemical and biological properties of hydroxyapatite (HA) and hardystonite (HS) based composite scaffolds. Hardystonite (Ca₂ZnSi₂O₇) powders were synthesized by a sol–gel method while polycaprolactone–hardystonite (PCL–HS) and polycaprolactone–hydroxyapatite (PCL–HA) were fabricated in nanofibrous form by electrospinning. The physico-chemical and biological properties such as tensile strength, cell proliferation, cell infiltration and alkaline phosphatase activity were determined on both kinds of scaffolds. We found that PCL–HS scaffolds had better mechanical strength compared to PCL–HA scaffolds. Addition of HA and HS particles to PCL did not show any inhibitory effect on blood biocompatibility of scaffolds when assessed by hemolysis assay. The in vitro cellular behavior was evaluated by growing murine adipose-tissue-derived stem cells (mE-ASCs) over the scaffolds. Enhanced cell proliferation and improved cellular infiltrations on PCL–HS scaffolds were observed when compared to HA containing scaffolds. PCL–HS scaffolds exhibited a significant increase in alkaline phosphatase (ALP) activity and better mineralization of the matrix in comparison to PCL–HA scaffolds. These results clearly demonstrate the stimulatory role of Zn and Si present in HS based composite scaffolds, suggesting their potential application for bone tissue engineering.     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.     

Loop‐Mediated Isothermal Amplification (LAMP): A Rapid and Sensitive Tool for Quality Assessment of Meat Products

Loop‐mediated isothermal amplification (LAMP) is a novel method that amplifies target nucleic acids under isothermal conditions. It is a rapid, specific, and sensitive method, which does not require costly thermal cyclers for the detection of nucleic acids. Thus, it is suitable for on‐site detection assays under low‐resource settings. It can also be integrated on compact lab‐on‐a‐chip devices for the development of micro‐total analysis systems. This review discusses LAMP‐based methods, as well as LAMP‐based centrifugal, microfluidic, and other fluid‐handling devices, which have been developed for the assessment of meat quality parameters that are related to the presence or absence of nucleic acids, for example, animal species identification and microbiological quality. Advances in improving the rapidity, specificity, and sensitivity of LAMP techniques for the assessment of these meat quality parameters are also discussed in this review.     

Carbon dioxide emission and its regulation at land–water interface downstream of a point source at Ganga River (India)

The streams and rivers are considered hotspots of CO₂ exchange; and representative direct CO₂ emission measurements are essential for a correct regional estimate. We measured CO₂ emission flux at 15 sites at land–water interface downstream of a point source during low flow for three consecutive months for the year 2017. The general range of CO₂ efflux observed here was close to the results of regional studies, although values near the point source were disproportionately high (>350 mg/m²/h). CO₂ emission flux showed strong dependence on total organic carbon (TOC; R² = 0.96; P < 0.001), (R² = 0.88; P < 0.001), soluble reactive‐P (SRP; R² = 0.91; P < 0.001) and microbial activity measured in terms of fluorescein diacetate activity (FDAase; R² = 0.92; P < 0.001) and substrate induced respiration (SIR; R² = 0.96; P < 0.001). Because point source‐associated interfaces provide heterogeneous habitats, our study suggests the need for large scale monitoring of CO₂ emission at land–water interface of major rivers for more correctly presenting the regional scale CO₂ budget.