Are the desks and chairs at school appropriate?

The aim of the current study was to find out how the measures of chairs and desks match with the anthropometrics of schoolchildren and how schoolchildren sit during a lesson in their classroom. This paper reports the baseline measurements of an intervention study. Participants of this study were 6th and 8th grade (12 and 14 year old) schoolchildren from two comprehensive schools in Finland (N = 101, 57 girls and 44 boys). The main outcome measures were the differences between desk height and elbow-floor height, and chair height and popliteal height. Forty-three participants were randomized for sitting posture analysis by video recordings. The study showed that desks were on average 13 cm above elbow-floor height and chairs 2 cm below popliteal height. For 56% of time participants sat with their backs flexed >20 degrees and/or rotated >45 degrees . For 70% of time they sat with their necks flexed >20 degrees or rotated >45 degrees. The results indicate that there is a mismatch between school furniture and the anthropometrics of schoolchildren. Schoolchildren sit in disadvantaged postures for a substantial part of school lessons.     

Consensus kNN QSAR: a versatile method for predicting the estrogenic activity of organic compounds in silico. A comparative study with five estrogen receptors and a large, diverse set of ligands

Quantitative structure-activity relationships (QSARs) have proved increasingly useful for predicting the biological activities of molecules (e.g., their binding affinities to different receptors) and can be used in environmental chemistry as a preliminary tool for screening the activities of untested molecules, producing valuable information on which compounds should be tested more thoroughly with experimental affinity assays or in animals. The predictive ability of the consensus kNN QSAR method is corroborated here using a diverse set of 245 compounds, which have been assayed for their relative binding affinities to the estrogen receptor of four species: human (ER alpha and ER beta), calf, mouse, and rat. Leave-one-out cross-validation (LOO-CV) and gamma-randomization tests were applied to the QSAR models for internal validation, and separate training and test sets were used for external validation. The internal predictive abilities of the consensus models for all five data sets were convincing, with cross-validated correlation coefficients (LOO-CV q2 values) varying from 0.69 (human ER beta data) to 0.79 (human ER alpha data). The external predictive abilities were also encouraging, as the predictive r2 scores (pr-r2 values) varied from 0.62 (human ER beta data) to 0.77 (calf and mouse data). The results indicate that consensus kNN QSAR is a feasible method for rapid screening of the estrogenic activity of organic compounds.     

Effect of hot drawing on properties of wet‐spun poly(L,D‐lactide) copolymer multifilament fibers

Polylactide stereocopolymer multifilament fibers were prepared by wet spinning and subsequent hot drawing. The stereocopolymers were poly‐(L,D ‐lactide) [P(L,D )LA], L/D ratio 96/4, and poly‐(L,DL ‐lactide) [P(L,DL )LA], L/DL ratio 70/30. They were dissolved in dichloromethane and coagulated in a spin bath containing ethanol. The hot‐drawing temperature was 65°C. The draw ratios (DR) were upto 4.5 to the P(L,D )LA 96/4 filaments and upto 3 to the P(L,DL )LA 70/30 filaments. Wet spinning decreased crystallinities of both copolymers. Hot drawing increased the crystallinity of the P(L,D )LA 96/4 filament but not to the level of the original copolymer, whereas the as‐spun and the hot‐drawn P(L,DL )LA 70/30 filaments were amorphous. The filament diameter, tenacity, Young's modulus, and elongation at break were dependent on the DR. The maximum tenacity (285 MPa) and Young's modulus (2.0 GPa) were achieved with the P(L,D )LA 96/4 filament at the DR of 4.5. Respectively, the maximum tenacity of the hot‐drawn P(L,DL )LA 70/30 filament was 175 MPa and Young's modulus 1.3 GPa at the DR of 3. Hot drawing slowed down in vitro degradation rate of both stereocopolymer filaments. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Urban small area variation in adolescents' health behaviour

Our previous study indicated that region plays a relatively small role in adolescents' health behaviour. Here, the regional patterning of health behaviour is studied further by shifting the focus to small areas. First, we test whether small area socioeconomic, demographic and housing characteristics correlate with health behaviour. The analysis then turns to the relationship between these characteristics and their individual level correlates. We wish to ascertain if behaviour is related to small area characteristics similarly for both genders and for adolescents' socioeconomic characteristics. The Adolescent Health and Lifestyle Survey data from 1989-1995 (16- and 18-year-olds, n = 1048, response rate 71%) were linked with data describing 33 subareas of Helsinki, the capital of Finland. Smoking, alcohol use, abstention from dietary fat and physical activity were used as lifestyle indicators. Gender apparently influences the extent to which the area plays a role. Logistic regression demonstrated that prolonged unemployment predicted low prevalence of abstention from dietary fat (traditional dietary patterns) among girls and heavy drinking among boys. High total rate of unemployment predicted lower physical activity among girls. Also owner-occupied housing correlated positively with girls' physical activity. Although the individual level socioeconomic characteristics were not as strongly related to health behaviour as the small area factors, a low level of education predicted smoking and alcohol use and, among girls, decreased physical activity. We conclude that small area characteristics, especially the level of unemployment of the area, may be even more strongly related to health behaviour than individual socioeconomic characteristics.     

Dental services utilization between 1977 and 1995 by Finnish adolescents of different socioeconomic levels

Genetic diversity in the second domain exon of Atlantic salmon (Salmo salar) major histocompatibility complex (Mhc) class I was investigated in two dams and nine of their haploid offspring by means of polymerase chain reaction (PCR) and DNA sequence analysis. A similar study was also performed on nine diploid offspring from one of these dams. The complex segregation patterns and sequence similarities between variants make definitive allele, haplotype and locus assignments difficult. There are, however, indications of six Mhc-Sasa class I loci and a fairly well-defined haplotype of four variants. One non-polymorphic variant present in most specimens could be a salmon analogue to the human non-classical loci.     

Effect of purified Trichoderma reesei cellulases on formation of cotton powder from cotton fabric

The mode of action of monocomponent purified Trichoderma reesei cellobiohydrolases (CBHI and CBHII) and endoglucanases (EGI and EGII) on cotton fabrics was studied by analyzing the weight loss of the fabric, the reducing sugars, the soluble oligosaccharides and the molecular weight of the cotton powder formed. The impact of mechanical action on these factors was also evaluated. EGI and EGII released the highest amounts of reducing sugars and soluble oligosaccharides in both treatments with or without additional mechanical action. After cellulase treatment without additional mechanical action, all of the cellulases were found to have reduced the molecular weight of cotton poplin powder. When mechanical action was combined with enzyme treatments, only EGII reduced the molecular weight. The weight loss of EG‐treated fabrics was clearly higher than the weight loss of CBH‐treated fabrics with both low and high mechanical action levels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1917–1922, 2003     

Emissions of DEHP‐free PVC flooring

Degrading 2‐ethylhexyl‐containing PVC floorings (eg DEHP‐PVC floorings) and adhesives emit 2‐ethylhexanol (2‐EH) in the indoor air. The danger of flooring degradation comes from exposing occupants to harmful phthalates plasticisers (eg DEHP), but not from 2‐EH as such. Since the EU banned the use of phthalates in sensitive applications, the market is shifting to use DEHP‐free and alternative types of plasticisers in PVC products. However, data on emissions from DEHP‐free PVC floorings are scarce. This study aimed at assessing the surface and bulk emissions of two DEHP‐free PVC floorings over three years. The floorings were glued on the screed layer of concrete casts at 75%, 85%, and 95% RH. The volatile organic compounds (VOCs) were actively sampled using FLEC (surface emissions) and micro‐chamber/thermal extractor (µ‐CTE, bulk emissions) onto Tenax TA adsorbents and analyzed with TD‐GC‐MS. 2‐EH, C9‐alcohols, and total volatile organic compound (TVOC) emissions are reported. Emissions at 75% and 85% RH were similar. As expected, the highest emissions occurred at 95% RH. 2‐EH emissions originated from the adhesive. Because the two DEHP‐free floorings tested emitted C9‐alcohols at all tested RH, it makes the detection of flooring degradation harder, particularly if the adhesive used does not emit 2‐EH.     

The effect of water‐soluble polymers on rheology of microfibrillar cellulose suspension and dynamic mechanical properties of paper sheet

Rheological properties of fiber/polymer suspensions and dynamic mechanical analysis (DMA) of paper sheets containing the same polymers were measured. Correlations between viscoelastic properties of suspensions and strength of paper sheet are presented. Rheological properties of suspensions of microfibrillar cellulose (MFC) and a set of water soluble polymers were measured. Rheological properties of these complex fluids vary considerably depending on the added polymer. A suspension of fiber and carboxymethyl cellulose (CMC) exhibits a viscosity higher than the sum of the viscosity of the individual components in the suspension. In contrast, when cationic starch (CS) is used together with the fiber, the yielding behavior rather than the viscosity is characteristic of the suspension. Dynamic mechanical properties of paper sheets containing CMC or CS as additives were studied at different humidity levels. Different yielding behavior observed in oscillatory rheology can be correlated with straining behavior in dynamic mechanical properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Do ergonomically designed school workstations decrease musculoskeletal symptoms in children? A 26-month prospective follow-up study

Workstations at school are among several factors that contribute to musculoskeletal symptoms among school-aged children. The aim of this study was to investigate the effects of ergonomically designed workstations on schoolchildren's musculoskeletal symptoms as compared to conventional workstations. In the first 14-month phase of the study (2002-2003, two schools), 42 from the intervention and 46 from the control school participated. In the total follow-up of 26 months (2002-2004), 23 in the intervention group and 20 in the control group participated. Anthropometrics and musculoskeletal symptoms were measured. In general, the ergonomically designed school workstations did not decrease present neck-shoulder, upper back, low back and lower limbs strain and pain, compared to conventional ones during follow-ups.