Developing a hybrid PSO–ANN model for estimating the ultimate bearing capacity of rock-socketed piles

Neural Computing and Applications - Rock-socketed piles are commonly used in foundations built in soft ground, and thus, their bearing capacity is a key issue of universal concern in research,...     

Design and implementation of a new tuned hybrid intelligent model to predict the uniaxial compressive strength of the rock using SFS-ANFIS

This study proposes a novel design to systematically optimize the parameters for the adaptive neuro-fuzzy inference system (ANFIS) model using stochastic fractal search (SFS) algorithm. To affirm the efficiency of the proposed SFS-ANFIS model, the predicting results were compared with ANFIS and three hybrid methodologies based on ANFIS combined with genetic algorithm (GA), differential evolution (DE), and particle swarm optimization (PSO). Accurate prediction of uniaxial compressive strength (UCS) is of great significance for all geotechnical projects such as tunnels and dams. Hence, this study proposes the use of SFS-ANFIS, GA-ANFIS, DE-ANFIS, PSO-ANFIS, and ANFIS models to predict UCS. In this regard, the fresh water tunnel of Pahang–Selangor located in Malaysia was considered and the requirement data samples were collected. Different statistical metrics such as coefficient of determination (R²) and mean absolute error were used to evaluate the models. Referring to the efficiency results of SFS-ANFIS, it can be found that the SFS-ANFIS (with the R² of 0.981) has higher ability than PSO-ANFIS, DE-ANFIS, GA-ANFIS, and ANFIS models in predicting the UCS.

     

Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance

Engineering with Computers - Prediction of tunnel boring machine (TBM) performance parameters can be caused to reduce the risks associated with tunneling projects. This study is aimed to introduce...     

Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances

Uniaxial compressive strength (UCS) of rock is crucial for any type of projects constructed in/on rock mass. The test that is conducted to measure the UCS of rock is expensive, time consuming and having sample restriction. For this reason, the UCS of rock may be estimated using simple rock tests such as point load index (I _s(50)), Schmidt hammer (R _n) and p-wave velocity (V _p) tests. To estimate the UCS of granitic rock as a function of relevant rock properties like R _n, p-wave and I _s(50), the rock cores were collected from the face of the Pahang–Selangor fresh water tunnel in Malaysia. Afterwards, 124 samples are prepared and tested in accordance with relevant standards and the dataset is obtained. Further an established dataset is used for estimating the UCS of rock via three-nonlinear prediction tools, namely non-linear multiple regression (NLMR), artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS). After conducting the mentioned models, considering several performance indices including coefficient of determination (R ²), variance account for and root mean squared error and also using simple ranking procedure, the models were examined and the best prediction model was selected. It is concluded that the R ² equal to 0.951 for testing dataset suggests the superiority of the ANFIS model, while these values are 0.651 and 0.886 for NLMR and ANN techniques, respectively. The results pointed out that the ANFIS model can be used for predicting UCS of rocks with higher capacity in comparison with others. However, the developed model may be useful at a preliminary stage of design; it should be used with caution and only for the specified rock types.     

Strength evaluation of granite block samples with different predictive models

Over the last decade, application of soft computing techniques has rapidly grown up in different scientific fields, especially in rock mechanics. One of these cases relates to indirect assessment of uniaxial compressive strength (UCS) of rock samples with different artificial intelligent-based methods. In fact, the main advantage of such systems is to readily remove some difficulties arising in direct assessment of UCS, such as time-consuming and costly UCS test procedure. This study puts an effort to propose four accurate and practical predictive models of UCS using artificial neural network (ANN), hybrid ANN with imperialism competitive algorithm (ICA–ANN), hybrid ANN with artificial bee colony (ABC–ANN) and genetic programming (GP) approaches. To reach the aim of the current study, an experimental database containing a total of 71 data sets was set up by performing a number of laboratory tests on the rock samples collected from a tunnel site in Malaysia. To construct the desired predictive models of UCS based on training and test patterns, a combination of several rock characteristics with the most influence on UCS has been used as input parameters, i.e. porosity (n), Schmidt hammer rebound number (R), p-wave velocity (V_p) and point load strength index (Is(50)). To evaluate and compare the prediction precision of the developed models, a series of statistical indices, such as root mean squared error (RMSE), determination coefficient (R²) and variance account for (VAF) are utilized. Based on the simulation results and the measured indices, it was observed that the proposed GP model with the training and test RMSE values 0.0726 and 0.0691, respectively, gives better performance as compared to the other proposed models with values of (0.0740 and 0.0885), (0.0785 and 0.0742), and (0.0746 and 0.0771) for ANN, ICA–ANN and ABC–ANN, respectively. Moreover, a parametric analysis is accomplished on the proposed GP model to further verify its generalization capability. Hence, this GP-based model can be considered as a new applicable equation to accurately estimate the uniaxial compressive strength of granite block samples.

     

A new development of ANFIS–GMDH optimized by PSO to predict pile bearing capacity based on experimental datasets

Engineering with Computers - Prediction of ultimate pile bearing capacity with the aid of field experimental results through artificial intelligence (AI) techniques is one of the most significant...     

An optimized system of GMDH-ANFIS predictive model by ICA for estimating pile bearing capacity

The pile bearing capacity is considered as the most essential factor in designing deep foundations. Direct determination of this parameter in site is costly and difficult. Hence, this study presents a new technique of intelligence system based on the adaptive neuro-fuzzy inference system (ANFIS)-group method of data handling (GMDH) optimized by the imperialism competitive algorithm (ICA), ANFIS-GMDH-ICA for forecasting pile bearing capacity. In this advanced structure, the ICA role is to optimize the membership functions obtained by ANFIS-GMDH technique for receiving a higher accuracy level and lower error. To develop this model, the results of 257 high strain dynamic load tests (performed by authors) were considered and used in the analysis. For comparison purposes, ANFIS and GMDH models were selected and built for pile bearing capacity estimation. In terms of model accuracy, the obtained results showed that the newly developed model (i.e., ANFIS-GMDH-ICA) receives more accurate predicted values of pile bearing capacity compared to those obtained by ANFIS and GMDH predictive models. The proposed ANFIS-GMDH-ICA can be utilized as an advanced, applicable and powerful technique in issues related to foundation engineering and its design.

     

Feasibility of PSO-ANN model for predicting surface settlement caused by tunneling

The potential surface settlement, especially in urban areas, is one of the most hazardous factors in subway and other infrastructure tunnel excavations. Therefore, accurate prediction of maximum surface settlement (MSS) is essential to minimize the possible risk of damage. This paper presents a new hybrid model of artificial neural network (ANN) optimized by particle swarm optimization (PSO) for prediction of MSS. Here, this combination is abbreviated using PSO-ANN. To indicate the performance capacity of the PSO-ANN model in predicting MSS, a pre-developed ANN model was also developed. To construct the mentioned models, horizontal to vertical stress ratio, cohesion and Young’s modulus were set as input parameters, whereas MSS was considered as system output. A database consisting of 143 data sets, obtained from the line No. 2 of Karaj subway, in Iran, was used to develop the predictive models. The performance of the predictive models was evaluated by comparing performance prediction parameters, including root mean square error (RMSE), variance account for (VAF) and coefficient correlation (R ²). The results indicate that the proposed PSO-ANN model is able to predict MSS with a higher degree of accuracy in comparison with the ANN results. In addition, the results of sensitivity analysis show that the horizontal to vertical stress ratio has slightly higher effect of MSS compared to other model inputs.