Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Harmony search algorithm for infinite impulse response system identification

In this paper, optimal sets of filter coefficients are searched by a meta-heuristic optimization technique called Harmony Search (HS) algorithm for infinite impulse response (IIR) system identification problem. For different optimization problems, HS algorithm undergoes three basic rules; namely Random Selection (RS), Harmony Memory Consideration (HMC), and Pitch Adjustment (PA) rules, which are inspired from the process that the musicians use to improvise a perfect state of harmony with the consummate skill of blending notes in tune. With the help of the properly selected control parameters, a perfect balance is achieved in exploration and exploitation in searching phases. The detailed analysis of simulation results emphasizes the strength of HS algorithm to find the near-global optimal solution, quality of convergence profile and the speed of convergence while tested against standard benchmark examples for same and reduced order models.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

ENROUTE: An Entropy Aware Routing Scheme for Information-Centric Networks (ICN)

With the exponential growth of end users and web data, the internet is undergoing the change of paradigm from a user-centric model to a content-centric one, popularly known as information-centric networks (ICN). Current ICN research evolves around three key-issues namely (i) content request searching, (ii) content routing, and (iii) in-network caching scheme to deliver the requested content to the end user. This would improve the user experience to obtain requested content because it lowers the download delay and provides higher throughput. Existing researches have mainly focused on on-path congestion or expected delivery time of a content to determine the optimized path towards custodian. However, it ignores the cumulative effect of the link-state parameters and the state of the cache, and consequently it leads to degrade the delay performance. In order to overcome this shortfall, we consider both the congestion of a link and the state of on-path caches to determine the best possible routes. We introduce a generic term entropy to quantify the effects of link congestion and state of on-path caches. Thereafter, we develop a novel entropy dependent algorithm namely ENROUTE for searching of content request triggered by any user, routing of this content, and caching for the delivery this requested content to the user. The entropy value of an intra-domain node indicates how many popular contents are already cached in the node, which, in turn, signifies the degree of enrichment of that node with the popular contents. On the other hand, the entropy for a link indicates how much the link is congested with the traversal of contents. In order to have reduced delay, we enhance the entropy of caches in nodes, and also use path with low entropy for downloading contents. We evaluate the performance of our proposed ENROUTE algorithm against state-of-the-art schemes for various network parameters and observe an improvement of 29–52% in delay, 12–39% in hit rate, and 4–39% in throughput.

     

All‐Organic Dual Spin Valves with Well‐Resolved Four Resistive‐States

The formation of all‐organic dual spin valves (DSVs) with three organic spin‐selective layers, that is, spin‐injection, spin‐detection, and an additional spin‐filtering layer at the intermediate, is reported. As spin‐selective layers, manganese‐ and cobalt phthalocyanines, which are well‐known single‐molecule magnets, are used in their immobilized forms, so that all‐organic DSVs can be prefabricated for characterization. The three spin‐selective layers have provided four configurations with at most two spin‐flip interfaces enforcing spin‐flipping at the two nonmagnetic organic spacer layers, for which copper phthalocyanine is used. Since a couple of the four configurations have exhibited similar resistivities, the degeneracy in the resistive‐states is broken through asymmetric spin‐injection and spin‐detection layers and also through asymmetric thickness of the nonmagnetic spacer layers. When both the spin‐flip interfaces are made operative independently, a 2‐bit logic with four distinct resistive states can be achieved.     

Partition oriented frame based fair scheduler

Proportionate fair schedulers provide an effective methodology for scheduling recurrent real-time tasks on multiprocessors. However, a drawback in these schedulers is that they ignore a task’s affinity towards the processor where it was executed last, causing frequent inter-processor task migrations which ultimately results in increased execution times. This paper presents Partition Oriented Frame Based Fair Scheduler (POFBFS), an efficient proportional fair scheduler for periodic firm and soft real-time tasks that ensures a bounded number of task migrations. Experimental results reveal that POFBFS can achieve 3 to 100 times reduction in the number of migrations suffered with respect to the General-ERfair algorithm (for a set of 25 to 100 tasks running on 2 to 8 processors) while simultaneously maintaining high fairness accuracy.     

Application of evolutionary optimization techniques for finding the optimal set of concentric circular antenna array

In this paper the maximum sidelobe level (SLL) reductions, optimal beam patterns and optimal beam widths of various designs of three-ring planar concentric circular antenna arrays (PCCAA) are examined using three different classes of evolutionary optimization techniques to finally determine the global optimal three-ring PCCAA design and then establish some sort of ranking among the techniques. Apart from physical construction of a PCCAA, one may broadly classify its design into two major categories: uniformly excited arrays and non-uniformly excited arrays. The present paper assumes non-uniform excitations and uniform spacing of excitation elements in each three-ring PCCAA design and a design goal of maximizing SLL reduction associated with optimal beam patterns and beam widths. The design problem is modeled as an optimization problem for each PCCAA design and solved using different evolutionary optimization techniques to determine an optimum set of normalized excitation weights for PCCAA elements, which, when incorporated, results in a radiation pattern with optimal (maximum) SLL reduction. Among the various PCCAA designs, one which yields the global minimum SLL with global minimum first null beamwidth is the global optimal design. In this work the three-ring PCCAA containing (N₁ = 4, N₂ = 6, N₃ = 8) elements proves to be such global optimal design. The optimization techniques employed are real coded GA (RGA), canonical PSO (CPSO), craziness based PSO (CRPSO), evolutionary programming (BEP), hybrid evolutionary programming (HEP). While ranking the techniques after 30 total runs for each design, HEP, CRPSO, RGA, CPSO, BGA hold the first five ranks in order of optimization capability. HEP yields global minimum SLL (?32.86 dB) and global minimum BWFN (77.0°) for the optimal design. BEP often changes the rank from second to fifth depending on the design set. Further, when compared to a uniformly excited PCCAA having equal number of elements and same radii a reduction of major lobe beamwidth is also observed in the optimal non-uniformly excited case.     

Time evolution of entanglement and bistability of two coupled quantum dots in a driven cavity

Abstract

The time evolution of entanglement between two quantum dots (QDs) trapped inside a cavity driven by a coherent quantized field is studied. In the presence of dissipation, entanglement shows many interesting features such as sudden death and revival, and finite steady state value after sudden death. We also investigate dependence of entanglement on dot variables and its relation to bistability. It is found that entanglement vanishes when the cavity field intensity approaches the upper branch of the bistability curve. When the cavity is driven by a modulated field in the presence of dissipation, it can periodically generate entanglement, which is much larger than the maximum value attained in the steady-state for this system but the dots are never fully entangled.     

Polyacrylonitrile solution homogeneity study by dynamic shear rheology and the effect on the carbon fiber tensile strength

Poly(acrylonitrile‐co‐methacrylic acid) (PAN‐co‐MAA)/N,N‐dimethylformamide (DMF) solutions were prepared and dynamic shear rheology of these solutions were investigated. With increasing stirring time up to 72 h at 70°C, the polymer solution became less elastic (more liquid‐like) with a ～60% reduction in the zero‐shear viscosity. Relaxation spectra of the PAN‐co‐MAA/DMF solutions yield a decrease in relaxation time (disentanglement time, τ_d), corresponding to an about 8% decrease in viscosity average molecular weight. The log‐log plot of G′ (storage modulus) versus G″ (loss modulus) exhibited an increase in slope as a function of stirring time, suggesting that the molecular level solution homogeneity increased. In order to study the effect of solution homogeneity on the resulting carbon fiber tensile strength, multiple PAN‐co‐MAA/DMF solutions were prepared, and the precursor fibers were processed using gel‐spinning, followed by continuous stabilization and carbonization. The rheological properties of each solution were also measured and correlated with the tensile strength values of the carbon fibers. It was observed that with increasing the slope of the G′ versus G″ log‐log plot from 1.471 to 1.552, and reducing interfilament fiber friction during precursor fiber drawing through the addition of a fiber washing step prior to fiber drawing, the carbon fiber strength was improved (from 3.7 to 5.8 GPa). This suggests that along with precursor fiber manufacturing and carbonization, the solution homogeneity is also very important to obtain high strength carbon fiber. POLYM. ENG. SCI., 56:361–370, 2016. © 2016 Society of Plastics Engineers     

Solid‐state NMR study of spin finish of thermally treated PAN and PAN/CNT precursor fibers

Dry‐jet wet‐spun polyacrylonitrile (PAN) and PAN/carbon nanotubes (CNTs) precursor fibers coated by spin finishes were characterized using the solid‐state ¹H nuclear magnetic resonance technique. Series of fiber samples were prepared upon thermal treatment at different temperatures (room temperature to 180°C). Using the Hahn echo sequence, relatively mobile components were identified and the effect of the heat treatment on those components was studied. It was observed that the mobile components are mainly the spin finishes. Heat treatment caused loss of one of the spin finishes (Type B) to a great extent (～80%), whereas the other two spin finishes (Type A and Type C) were more stable. Additional information regarding the change in molecular mobility due to heat treatment was obtained by the spin‐lattice relaxation time ( T₁ ) analysis. It was found that the presence of CNT affects the T₁ relaxation time of the polymer in the composite fiber, however, that of relatively mobile components remains unaffected. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40734.