Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material

In this work we present the discrete models for dynamic fracture of structures built of brittle materials. The models construction is based on Voronoi cell representation of the heterogeneous structure, with the beam lattice network used to model the cohesive and compressive forces between the neighboring cells. Each lattice component is a geometrically exact shear deformable beam which can describe large rigid body motion and the most salient fracture mechanisms. The latter can be represented through the corresponding form of the beam constitutive equations, which are derived either at microscale with random distribution of material properties or at a mesoscale with average deterministic values. The proposed models are also placed within the framework of dynamics, where special attention is paid to constructing the lattice network mass matrix as well as the corresponding time-stepping schemes. Numerical simulations of compression and bending tests is given to illustrate the models performance.     

FDTD simulation of 30 /spl mu/m diameter polymer micro-ring

Numerical results on polymer surrounded by an air micro-ring coupled to waveguides are presented. The FDTD method predicts a filter width of 1.4 nm and an extraction efficiency of almost 80% for a gap of 0.15 /spl mu/m.     

Linearly bounded infinite graphs

Linearly bounded Turing machines have been mainly studied as acceptors for context-sensitive languages. We define a natural class of infinite automata representing their observable computational behavior, called linearly bounded graphs. These automata naturally accept the same languages as the linearly bounded machines defining them. We present some of their structural properties as well as alternative characterizations in terms of rewriting systems and context-sensitive transductions. Finally, we compare these graphs to rational graphs, which are another class of automata accepting the context-sensitive languages, and prove that in the bounded-degree case, rational graphs are a strict sub-class of linearly bounded graphs.A preliminary version of this article appeared in MFCS 2005.     

A multiparameter wearable physiologic monitoring system for space and terrestrial applications.

A novel, unobtrusive and wearable, multiparameter ambulatory physiologic monitoring system for space and terrestrial applications, termed LifeGuard, is presented. The core element is a wearable monitor, the crew physiologic observation device (CPOD), that provides the capability to continuously record two standard electrocardiogram leads, respiration rate via impedance plethysmography, heart rate, hemoglobin oxygen saturation, ambient or body temperature, three axes of acceleration, and blood pressure. These parameters can be digitally recorded with high fidelity over a 9-h period with precise time stamps and user-defined event markers. Data can be continuously streamed to a base station using a built-in Bluetooth RF link or stored in 32 MB of on-board flash memory and downloaded to a personal computer using a serial port. The device is powered by two AAA batteries. The design, laboratory, and field testing of the wearable monitors are described.     

A code tagging approach to software product line development

Software product line engineering seeks to systematise reuse when developing families of similar software systems so as to minimise development time, cost and defects. To realise variability at the code level, product line methods classically advocate usage of inheritance, components, frameworks, aspects or generative techniques. However, these might require unaffordable paradigm shifts for developers if the software was not thought at the outset as a product line. Furthermore, these techniques can be conflicting with a company’s coding practices or external regulations. These concerns were the motivation for the industry–university collaboration described in this paper in which we developed a minimally intrusive coding technique based on tags. The approach was complemented with traceability from code to feature diagrams which were exploited for automated configuration. It is supported by a toolchain and is now in use in the partner company for the development of flight-grade satellite communication software libraries.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

Features modeling with an α-stable distribution: Application to pattern recognition based on continuous belief functions

The aim of this paper is to show the interest in fitting features with an α-stable distribution to classify imperfect data. The supervised pattern recognition is thus based on the theory of continuous belief functions, which is a way to consider imprecision and uncertainty of data. The distributions of features are supposed to be unimodal and estimated by a single Gaussian and α-stable model. Experimental results are first obtained from synthetic data by combining two features of one dimension and by considering a vector of two features. Mass functions are calculated from plausibility functions by using the generalized Bayes theorem. The same study is applied to the automatic classification of three types of sea floor (rock, silt and sand) with features acquired by a mono-beam echo-sounder. We evaluate the quality of the α-stable model and the Gaussian model by analyzing qualitative results, using a Kolmogorov–Smirnov test (K–S test), and quantitative results with classification rates. The performances of the belief classifier are compared with a Bayesian approach.