A note on the variance of rank-based selection strategies for genetic algorithms and genetic programming

This paper evaluates different forms of rank-based selection that are used with genetic algorithms and genetic programming. Many types of rank based selection have exactly the same expected value in terms of the sampling rate allocated to each member of the population. However, the variance associated with that sampling rate can vary depending on how selection is implemented. We examine two forms of tournament selection and compare these to linear rank-based selection using an explicit formula. Because selective pressure has a direct impact on population diversity, we also examine the interaction between selective pressure and different mutation strategies.     

Piezoelectric fiber optic phase modulator with a reduced level of spurious polarization modulation

It is experimentally demonstrated that a tenfold decrease in the level of spurious polarization modulation can be achieved in a fiber optic phase modulator comprising two fiber sections featuring the polarization mode conversion, arranged on the same piezoelement.     

Effect of photoaligning azo dye structure on liquid crystal anchoring energy

A method of controlling anchoring energy of surface interaction of liquid crystal photoaligning substances is considered to enhance the liquid crystal display performances. An important parameter of the dye's molecular structure that determines the ratio of polar and azimuthal anchoring energy is the ability to form dimers. The values of dimerization thermodynamic potentials have been found. The probability of the formation of dye molecules dimers is evaluated. The bonds conjugation transfer via intermolecular hydrogen bond is revealed, and anisotropy of polarizability of the hydrogen bond is evaluated. The effect of dimerization on polar and azimuthal anchoring energy of liquid crystal — azo dye system — is shown.     

Advanced Characterization and Optimization of NiOx:Cu-SAM Hole-Transporting Bi-Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se2-Perovskite Tandem Solar Cells

The performance of five hole-transporting layers (HTLs) is investigated in both single-junction perovskite and Cu(In, Ga)Se₂ (CIGSe)-perovskite tandem solar cells: nickel oxide (NiO_x,), copper-doped nickel oxide (NiO_x:Cu), NiO_x+SAM, NiO_x:Cu+SAM, and SAM, where SAM is the [2-(3,-6Dimethoxy-9H-carbazol-9yl)ethyl]phosphonic acid (MeO-2PACz) self-assembled monolayer. The performance of the devices is correlated to the charge-carrier dynamics at the HTL/perovskite interface and the limiting factors of these HTLs are analyzed by performing time-resolved and absolute photoluminescence ((Tr)PL), transient surface photovoltage (tr-SPV), and X-ray/UV photoemission spectroscopy (XPS/UPS) measurements on indium tin oxide (ITO)/HTL/perovskite and CIGSe/HTL/perovskite stacks. A high quasi-Fermi level splitting to open-circuit (QFLS-V_oc) deficit is detected for the NiO_x-based devices, attributed to electron trapping and poor hole extraction at the NiO_x-perovskite interface and a low carrier effective lifetime in the bulk of the perovskite. Simultaneously, doping the NiO_x with 2% Cu and passivating its surface with MeO-2PACz suppresses the electron trapping, enhances the holes extraction, reduces the non-radiative interfacial recombination, and improves the band alignment. Due to this superior interfacial charge-carrier dynamics, NiO_x:Cu+SAM is found to be the most suitable HTL for the monolithic CIGSe-perovskite tandem devices, enabling a power-conversion efficiency (PCE) of 23.4%, V_oc of 1.72V, and a fill factor (FF) of 71%, while the remaining four HTLs suffer from prominent V_oc and FF losses.     

Calculations of thermal ignition time of hydrogen–air mixtures taking into account quantum corrections

The effect of quantum corrections to the rate constants of chemical reactions on the time of thermal ignition of hydrogen-containing mixtures is studied. It is shown that, at high pressures (30–100) atm and temperatures in the range of (700–900) K, accounting for the quantum corrections to the initiation reaction H₂ + O₂ → 2OH brings the data on the calculated ignition delay times of the hydrogen-containing mixture into agreement with the previously published results of measurements.     

Optical studies of the initial stage of spontaneous boiling-up

Spontaneous liquid boiling-up is studied using the technique of fiber-optic reflectometry. The speed of the experimental technique (10 MS/s) and small dimensions of the measurement area (9 μm) have opened new possibilities for monitoring the initial stage of boiling-up. When using a double-probe scheme, the fact of measuring the prognostic signal at different times by two sensitive elements of the optical probes was discovered. Based on the experimental results, a hypothesis was formulated regarding the local character of the appearance of the perturbation source generating the observed signal in a superheated liquid. An estimate was obtained for the rate of perturbation propagation in a wide variation range of the degree of liquid superheating.     

Thermal diagnostics of friction in sliding bearings with account for propagation of heat and movement of shaft

A method for the thermal diagnostics of friction in a sliding bearing is considered for the case when a three-dimensional mathematical model of the thermal process taking into account the motion of the shaft is used. Basic relations for restoring the specific power of the frictional heat generation in the friction zone of the bearing using temperature data and results of computational experiments are presented, which show the stability of a solution of the corresponding inverse boundary problem to errors of the temperature data.     

Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles

In this work, two medium Mn steels (5.8 and 5.7 wt pct Mn) were subjected to a quenching and partitioning (Q&P) treatment employing a partitioning temperature which corresponded to the start of austenite reverse transformation (ART). The influence of a 1.6 wt pct Ni addition in one of the steels and cycle parameters on austenite stability and mechanical properties was also studied. High contents of retained austenite were obtained in the lower quenching temperature (QT) condition, which at the same time resulted in a finer microstructure. The addition of Ni was effective in stabilizing higher contents of austenite. The partitioning of Mn and Ni from martensite into austenite was observed by TEM–EDS. The partitioning behaviour of Mn depended on the QT condition. The lower QT condition facilitated Mn enrichment of austenite laths during partitioning and stabilization of a higher content of austenite. The medium Mn steel containing Ni showed outstanding values of the product of tensile strength (TS) and total elongation (TEL) in the lower QT condition and a higher mechanical stability of the austenite.