Surface Integrity Assessment Upon Electric Discharge Machining of Die Steel Using Non-Destructive Magnetic Barkhausen Noise Technique

Surface integrity characterization of manufactured component is very important as it significantly affects the in-service performance of the component. Till now, surface integrity was evaluated using conventional measurement technique like microhardness tester, X-ray diffraction, optical microscopy and surface roughness tester. But, this technique being laboratory based cannot be used for in-service monitoring of the surface integrity. The present study focuses on the characterization of surface integrity upon electric discharge machined sample using non-destructive magnetic Barkhausen noise technique. Electric discharge machining was performed in die-sinking mode on die steel using copper–tungsten electrode (negative polarity). Experiment was performed by selecting different levels of peak current, gap voltage and pulse on time. Surface integrity characteristics like microhardness change, residual stress, microstructural alteration and surface roughness were analysed using microhardness tester, X-ray diffraction, optical microscopy and surface roughness tester, respectively, and were then correlated with magnetic parameter like root mean square value and peak value obtained from Barkhausen noise signal. The results show a good correlation between magnetic parameter (RMS and Peak value) of Barkhausen noise with the microhardness and surface roughness of the machined sample.

     

Efficiency and effectiveness enhancement of an intercooler of two‐stage air compressor by low‐cost Al2O3/water nanofluids

The present study was aimed to utilize low‐cost alumina (Al₂O₃) nanoparticles for improving the heat transfer behavior in an intercooler of two‐stage air compressor. Experimental investigation was carried out with three different volume concentrations of 0.5%, 0.75%, and 1.0% Al₂O₃/water nanofluids to assess the performance of the intercooler, that is, counterflow heat exchanger at different loads. Thermal properties such as thermal conductivity and overall heat transfer coefficient of nanofluid increased substantially with increasing concentration of Al₂O₃ nanoparticles. Specific heat capacity of nanofluids were lower than base water. The intercooler performance parameters such as effectiveness and efficiency improved appreciably with the employment of nanofluid. The efficiency increased by about 6.1% with maximum concentration of nanofluid, that is, 1% at 3‐bar compressor load. It is concluded from the study that high concentration of Al₂O₃ nanoparticles dispersion in water would offer better heat transfer performance of the intercooler.     

INFLUENCE OF DESIGN AND OPERATIONAL PARAMETERS ON YIELD OF FULLERENES

Fullerene production by arc-discharge method using graphite electrodes has been studied with respect to influence of different design and operational parameters on fullerene yield in a constant arc fullerene reactor. The design parameters like reactor length, diameter, heat transfer area and operational parameters like voltage, current, pressure, coolant flow rate, graphite evaporation rate and electrode diameter etc. have been experimentally studied in detail to establish a relationship between these parameters and fullerene yield. All the parameters affecting the yield have been correlated by dimensional analysis and an equation to calculate the fullerene yield is derived. It was observed experimentally as well as by dimensional analysis that many favorable parameters for getting good yield are linked with other parameters which also get changed if the favorable parameters are changed and thus it is difficult to make a substantial change in the yield of fullerenes.  The relationship established between the yield and parameters is however useful in optimising fullerene yield in a reactor and also helpful in designing a futuristic fullerene reactor of improved yield and productivity. The fullerene yield from different designs of reactors is obtained in the range of 4% to 20%.     

Identification of critical erosion prone areas in the small agricultural watershed using USLE,GIS and remote sensing

In the present study, Karso watershed of Hazaribagh, Jharkhand State, India was divided into 200 × 200 grid cells and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion prone areas of watershed for prioritization purpose. Average annual sediment yield data on grid basis was estimated using Universal Soil Loss Equation (USLE). In general, a major limitation in the use of hydrological models has been their inability to handle the large amounts of input data that describe the heterogeneity of the natural system. Remote sensing (RS) technology provides the vital spatial and temporal information on some of these parameters. A recent and emerging technology represented by Geographic Information System (GIS) was used as the tool to generate, manipulate and spatially organize disparate data for sediment yield modeling. Thus, the Arc Info 7.2 GIS software and RS (ERDAS IMAGINE 8.4 image processing software) provided spatial input data to the erosion model, while the USLE was used to predict the spatial distribution of the sediment yield on grid basis. The deviation of estimated sediment yield from the observed values in the range of 1.37 to 13.85 percent indicates accurate estimation of sediment yield from the watershed.     

Snowpack response in the Assiniboine-Red River basin associated with projected global warming of 1.0 °C to 3.0 °C

This study assesses snow response in the Assiniboine-Red River basin, located in the Lake Winnipeg watershed, due to anthropogenic climate change. We use a process-based distributed snow model driven by an ensemble of eight statistically downscaled global climate models (GCMs) to project future changes under policy-relevant global mean temperature (GMT) increases of 1.0 °C to 3.0 °C above the pre-industrial period. Results indicate that basin scale seasonal warmings generally exceed the GMT increases, with greater warming in winter months. The majority of GCMs project wetter winters and springs, and drier summers, while autumn could become either drier or wetter. An analysis of snow water equivalent (SWE) responses under GMT changes reveal higher correlations of snow cover duration (SCD), snowmelt rate, maximum SWE (SWE_max) and timing of SWE_max with winter and spring temperatures compared to precipitation, implying that these variables are predominantly temperature controlled. Consequently, under the GMT increases from 1.0 °C to 3.0 °C, the basin will experience successively shorter SCD, slower snowmelt, smaller monthly SWE and SWE_max, earlier SWE_max, and a transition from snow-dominated to rain-snow hybrid regime. Further, while the winter precipitation increases for some GCMs compensate the temperature-driven changes in SWE, the increases for most GCMs occur as rainfall, thus limiting the positive contribution to snow storage. Overall, this study provides a detailed diagnosis of the snow regime changes under the policy-relevant GMT changes, and a basis for further investigations on water quantity and quality changes.     

HMOSHSSA: a hybrid meta-heuristic approach for solving constrained optimization problems

This paper proposes a novel hybrid multi-objective optimization algorithm named HMOSHSSA by synthesizing the strengths of Multi-objective Spotted Hyena Optimizer (MOSHO) and Salp Swarm Algorithm (SSA). HMOSHSSA utilizes the exploration capability of MOSHO to explore the search space effectively and leader and follower selection mechanism of SSA to achieve global best solution with faster convergence. The proposed algorithm is evaluated on 24 benchmark test functions, and its performance is compared with seven well-known multi-objective optimization algorithms. The experimental results demonstrate that HMOSHSSA acquires very competitive results and outperforms other algorithms in terms of convergence speed, search-ability and accuracy. Additionally, HMOSHSSA is also applied on seven well-known engineering problems to further verify its efficacy. The results reveal the effectiveness of proposed algorithm toward solving real-life multi-objective optimization problems.

     

Performance Tuning and Reliability Analysis of the Electrostatically Configured Nanotube Tunnel FET with Impact of Interface Trap Charges

Silicon - This paper examines, an electrostatically configured Nano-Tube Tunnel Field-Effect Transistor (ED-NTTFET). During the fabrication process, different charges such as fixed charge, oxide...