Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.     

Studying high impact fix-inducing changes

As software systems continue to play an important role in our daily lives, their quality is of paramount importance. Therefore, a plethora of prior research has focused on predicting components of software that are defect-prone. One aspect of this research focuses on predicting software changes that are fix-inducing. Although the prior research on fix-inducing changes has many advantages in terms of highly accurate results, it has one main drawback: It gives the same level of impact to all fix-inducing changes. We argue that treating all fix-inducing changes the same is not ideal, since a small typo in a change is easier to address by a developer than a thread synchronization issue. Therefore, in this paper, we study high impact fix-inducing changes (HIFCs). Since the impact of a change can be measured in different ways, we first propose a measure of impact of the fix-inducing changes, which takes into account the implementation work that needs to be done by developers in later (fixing) changes. Our measure of impact for a fix-inducing change uses the amount of churn, the number of files and the number of subsystems modified by developers during an associated fix of the fix-inducing change. We perform our study using six large open source projects to build specialized models that identify HIFCs, determine the best indicators of HIFCs and examine the benefits of prioritizing HIFCs. Using change factors, we are able to predict 56 % to 77 % of HIFCs with an average false alarm (misclassification) rate of 16 %. We find that the lines of code added, the number of developers who worked on a change, and the number of prior modifications on the files modified during a change are the best indicators of HIFCs. Lastly, we observe that a specialized model for HIFCs can provide inspection effort savings of 4 % over the state-of-the-art models. We believe our results would help practitioners prioritize their efforts towards the most impactful fix-inducing changes and save inspection effort.     

Quadrilateral meshes with provable angle bounds

In this paper, we present an algorithm that utilizes a quadtree data structure to construct a quadrilateral mesh for a simple polygonal region in which no newly created angle is smaller than 18.43^° (=arctan(\frac13)){{18.43}}^{\circ} ({=}\hbox{arctan}(\frac{1}{3})) or greater than 171.86^° (=135^° + 2arctan(\frac13)){{171.86}}^{\circ} ({=}{{135}}^{\circ} + 2\hbox{arctan}(\frac{1}{3})). This is the first known result, to the best of our knowledge, on a direct quadrilateral mesh generation algorithm with a provable guarantee on the angles.     

Real imaging and size values of Saccharomyces cerevisiae cells with comparable contrast tuning to two environmental scanning electron microscopy modes

The combined application of electron microscopy (EM) is frequently used for the microstructural investigation of biological specimens and plays two important roles in the quantification and in gaining an improved understanding of biological phenomena by making use of the highest resolution capability provided by EM. The possibility of imaging wet specimens in their "native" states in the environmental scanning electron microscope (ESEM) at high resolution and large depth of focus in real time is discussed in this paper. It is demonstrated here that new features can be discovered by the elimination of even the least hazardous approaches in some preparation techniques, that destroy the samples. Since the analysis conditions may influence the morphology and the extreme surface sensitivity of living biological systems, the results obtained from the same cultured cell with two different ESEM modes (Lvac mode and wet mode) were compared. This offers new opportunities compared with ESEM-wet/Lvac-mode imaging, since wet-mode imaging involves a real contrast and gives an indication of the changes in cell morphology and structure required for cell viability. In this study, wet-mode imaging was optimized using the unique ability of cell quantities for microcharacterization in situ giving very fine features of topological effects. Accordingly, the progress is reported by comparing the results of these two modes, which demonstrate interesting application details. In general, the functional comparisons have revealed that the fresh unprocessed Saccharomyces cerevisiae cells (ESEM-wet mode) were essentially unaltered with improved and minimal specimen preparation timescales, and the optimal cell viability degree was visualized and also measured quantitatively while the cell size remained unchanged with continuous images.     

Mucopolysaccharidoses: Cellular Consequences of Glycosaminoglycans Accumulation and Potential Targets

Mucopolysaccharidoses (MPSs) constitute a heterogeneous group of lysosomal storage disorders characterized by the lysosomal accumulation of glycosaminoglycans (GAGs). Although lysosomal dysfunction is mainly affected, several cellular organelles such as mitochondria, endoplasmic reticulum, Golgi apparatus, and their related process are also impaired, leading to the activation of pathophysiological cascades. While supplying missing enzymes is the mainstream for the treatment of MPS, including enzyme replacement therapy (ERT), hematopoietic stem cell transplantation (HSCT), or gene therapy (GT), the use of modulators available to restore affected organelles for recovering cell homeostasis may be a simultaneous approach. This review summarizes the current knowledge about the cellular consequences of the lysosomal GAGs accumulation and discusses the use of potential modulators that can reestablish normal cell function beyond ERT-, HSCT-, or GT-based alternatives.     

Next-Generation Grade and Survival Expression Biomarkers of Human Gliomas Based on Algorithmically Reconstructed Molecular Pathways

In gliomas, expression of certain marker genes is strongly associated with survival and tumor type and often exceeds histological assessments. Using a human interactome model, we algorithmically reconstructed 7494 new-type molecular pathways that are centered each on an individual protein. Each single-gene expression and gene-centric pathway activation was tested as a survival and tumor grade biomarker in gliomas and their diagnostic subgroups (IDH mutant or wild type, IDH mutant with 1p/19q co-deletion, MGMT promoter methylated or unmethylated), including the three major molecular subtypes of glioblastoma (proneural, mesenchymal, classical). We used three datasets from The Cancer Genome Atlas and the Chinese Glioma Genome Atlas, which in total include 527 glioblastoma and 1097 low grade glioma profiles. We identified 2724 such gene and 2418 pathway survival biomarkers out of total 17,717 genes and 7494 pathways analyzed. We then assessed tumor grade and molecular subtype biomarkers and with the threshold of AUC > 0.7 identified 1322/982 gene biomarkers and 472/537 pathway biomarkers. This suggests roughly two times greater efficacy of the reconstructed pathway approach compared to gene biomarkers. Thus, we conclude that activation levels of algorithmically reconstructed gene-centric pathways are a potent class of new-generation diagnostic and prognostic biomarkers for gliomas.     

Using of Photoluminescent Tile for Evacuation of the Buildings During Electrical Failure

Photoluminescent pigments could be successfully applied on the wall tiles, floor tiles and porcelain tiles as well as glass substrates （glass mosaics, borders, and cutted glass with various designs）. For this applications, these products can be used for different purposes. In this study, these pigments are applied on the ceramic tiles and glass mosaics/tiles with traditional ceramic production line. These products are intentended to provide guidance in the event of a power failure. With this study also aimed to prevent potential accidents and injury during evacuation of building.