Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product. 相似文献
In wireless sensor networks (WSNs), the appearance of coverage holes over a large target field is mostly possible. Those holes reduce network performance and may affect the network efficiency. Several approaches were proposed to heal coverage holes in WSNs, but they still suffer from some weaknesses. In this paper we suggest a distributed algorithm, named hybrid hole healing algorithm (3HA), to find the minimum effective patching positions to deploy additional nodes to cover the holes. A hole manager node of each hole is responsible for operating the 3HA algorithm which requires two phases. The first phase finds all candidate patching positions using a Voronoi diagram. It takes all Voronoi vertices within the hole as the initial patching positions list. The second phase reduces as much as possible this list based on integer linear programming and on a probabilistic sensor model. The 3HA algorithm repeats the above phases in rounds, until all Voronoi vertices are covered. Simulation results show that our solution offers a high coverage ratio for various forms and sizes of holes and reduces the number of additional sensors when compared to some algorithms like the Perimeter-based, the Delaunay triangulation-based, the Voronoi-based, and the Trees-based coverage hole healing methods.
Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al2O3/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe2O3 was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe2O3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours. 相似文献
The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO2) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times. 相似文献
The paper describes a prototype system called HiSQL (Historical SQL) which extends the functionality of SQL in manipulating
historical data, by providing functions for spatial and temporal processing. Conceptually the paper is divided into three
parts: the first part deals with the design and architecture of the system; the second part introduces a case study (the defters);
and the third part describes specific functions for spatial and temporal processing of serial documents. The paper concludes
with a comparison between HiSQL and SQL and suggestions for further work.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
In this article the direct boundary element formulations of stretching and bending plate problems are combined together to solve thin walled structures and other similar frames. The final system is obtained by assuming each individual plane structural element as a subregion. After the necessary transforms of these equations they can be combined together taking into account the displacement compatibility and equilibrium conditions. 相似文献
As the wave of globalization washes over geographical boundaries, the world steps into the era of a new knowledge-based economy with governments striving to encourage innovation in industry especially through national systems of innovation. A national system of innovation (NSI) is considered important because how a nation utilizes and exploits its NSI will determine whether it can compete and ride the wave of globalization or be carried by it and thrashed onto the shores of the new economy. This paper seeks to highlight the linkages developed for enabling communication among the various NSI stakeholders for achieving goals in one such effort, viz. the Multimedia Super Corridor (MSC) Cluster of Malaysia. The MSC offers a vision to create a global multimedia climate through an integrated environment of interlinked elements and attributes. The government of Malaysia, realising the significance of the NSI as a way to better utilize, exploit, and enhance systems, is making efforts to this effect. The efforts include bringing together various stakeholder organizations under the "Multimedia Flagship Applications" to develop flagship applications. This is for the development of information technology applications to pave the way toward a knowledge-based economy. The MSC Cluster is presented here as a physical manifestation of the NSI, and it gives an idea as to how policy makers can design linkages for communication among the various stakeholders to further national innovative performance and competitiveness in general. 相似文献
The current-voltage characteristics of lateral pn diodes fabricated in polysilicon layer grown by LPCVD on oxidized silicon substrates are analyzed versus temperature. The simulation proposed by Greve (1985) using the analytical current modeling is applied to forward and reverse junction currents for various temperatures; this modeling shows its limitations. Then to fit the experimental characteristics at low and high temperatures as well as at low and high current levels, a numerical modeling is developed taking into account the local electrical field effect on recombination and generation mechanisms at grain boundaries in the whole of the structure, i.e., quasi-neutral and depleted regions. This modeling allows one to fit the complete I-V experimental curves in the whole of the considered temperature range (200 K-400 K) with physical acceptable parameters 相似文献