GA-SVR: a novel hybrid data-driven model to simulate vertical load capacity of driven piles

Piles are widely applied to substructures of various infrastructural buildings. Soil has a complex nature; thus, a variety of empirical models have been proposed for the prediction of the bearing capacity of piles. The aim of this study is to propose a novel artificial intelligent approach to predict vertical load capacity of driven piles in cohesionless soils using support vector regression (SVR) optimized by genetic algorithm (GA). To the best of our knowledge, no research has been developed the GA-SVR model to predict vertical load capacity of driven piles in different timescales as of yet, and the novelty of this study is to develop a new hybrid intelligent approach in this field. To investigate the efficacy of GA-SVR model, two other models, i.e., SVR and linear regression models, are also used for a comparative study. According to the obtained results, GA-SVR model clearly outperformed the SVR and linear regression models by achieving less root mean square error (RMSE) and higher coefficient of determination (R²). In other words, GA-SVR with RMSE of 0.017 and R² of 0.980 has higher performance than SVR with RMSE of 0.035 and R² of 0.912, and linear regression model with RMSE of 0.079 and R² of 0.625.

     

A new combination of artificial neural network and <Emphasis Type="Italic">K</Emphasis>-nearest neighbors models to predict blast-induced ground vibration and air-overpressure

Blasting operation is widely used method for rock excavation in mining and civil works. Ground vibration and air-overpressure (AOp) are two of the most detrimental effects induced by blasting. So, evaluation and prediction of ground vibration and AOp are essential. This paper presents a new combination of artificial neural network (ANN) and K-nearest neighbors (KNN) models to predict blast-induced ground vibration and AOp. Here, this combination is abbreviated using ANN-KNN. To indicate performance of the ANN-KNN model in predicting ground vibration and AOp, a pre-developed ANN as well as two empirical equations, presented by United States Bureau of Mines (USBM), were developed. To construct the mentioned models, maximum charge per delay (MC) and distance between blast face and monitoring station (D) were set as input parameters, whereas AOp and peak particle velocity (PPV), as a vibration index, were considered as output parameters. A database consisting of 75 datasets, obtained from the Shur river dam, Iran, was utilized to develop the mentioned models. In terms of using three performance indices, namely coefficient correlation (R ²), root mean square error and variance account for, the superiority of the ANN-KNN model was proved in comparison with the ANN and USBM equations.     

Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends

Polypropylene (PP) was modified utilizing two types of polyesteramide‐based hyperbranched polymers (amphiphilic PS and hydrophilic PH). A maleicanhydride‐modified PP (PM) was used as a reactive dispersing agent to enhance the modification by grafting the hyperbranched polymers onto the PP chains. Pure PP, two different non‐reactively modified samples, i.e. excluding PM, and two different reactively modified samples, i.e. including PM, were studied. Investigating the morphology of the samples was performed by scanning electron microscopy. To follow the effect of the modification on the dynamic mechanical properties, dynamic mechanical analysis experiments both in the melt (rheometric mechanical spectrometry) and in solid state (dynamic mechanical thermal analysis) were carried out. In the next step, the nanocrystalline structure of the samples was studied by small angle X‐ray scattering (SAXS) in two different modes, i.e. static and recrystallization. Hundreds of SAXS patterns were analyzed automatically using procedures written in PV‐WAVE image‐processing software. The chord distribution function (CDF) was calculated and the long period (l_p) of the crystal lamellae was extracted from the CDFs. The rheometric mechanical spectrometry results show that both hyperbranched polymers decrease complex viscosity η^* and enhance liquid‐like behavior. This happens more significantly when PM is included. The dynamic mechanical thermal analysis results reveal that T_g decreases when PS and PH are added. In the reactively modified samples this reduction is compensated most probably because of the crosslinked structure formed through the grafting reaction between the hyperbranched polymers and PM. Such structure is confirmed by SAXS data and calculated CDFs in the recrystallization mode. Static SAXS data also show enhancement in the crosshatched morphology of the crystalline lamellae of PP for reactively modified samples compared with non‐reactively modified samples. © 2013 Society of Chemical Industry     

Dynamically vulcanized polypropylene/ethylene‐propylene diene monomer/organoclay nanocomposites: Effect of mixing sequence on structural,rheological, and mechanical properties

Dynamically vulcanized thermoplastic elastomer (TPE) nanocomposites based on polypropylene (PP), ethylene‐propylene diene monomer (EPDM) and cloisite 15A were prepared via direct melt mixing in a co‐rotating twin‐screw extruder. The mixing process was carried out with optimized processing parameters (barrel temperature = 180°C; screw speed = 150 rpm; and feeding rate = 0.2 kg/hr). The formulation used to prepare the nanocomposites was fixed to 75/20/5 (PP/EPDM/Cloisite^©15A), expressed in mass fraction. Effect of mixing sequence on the properties of vulcanized and unvulcanized (TPE) nanocomposites prepared under similar conditions was investigated using X‐ray diffraction (XRD) and a tensile testing machine. Results showed that the sequence of mixing does affect the properties of final TPE nanocomposites. Accordingly, nanocomposite samples prepared through mixing the preblended PP/clay masterbatch with EPDM phase, show better clay dispersion within the polymer matrix. J. VINYL ADDIT. TECHNOL., 22:320–325, 2016. © 2014 Society of Plastics Engineers     

A comparative study to assess structure–properties relationships in (acrylonitrile butadiene rubber)‐based composites: Recycled microfillers versus nanofillers

This paper reports on the reinforcing effects of different types of fillers, namely, nanoclay (NC), micron size calcium carbonate (MCC), and micron size recycled powder coating waste (MPCW), on the ultimate properties of acrylonitrile butadiene rubber (NBR) compounds. The microcomposites and nanocomposites were characterized by X‐ray diffraction and scanning electron microscopy, implying enlargement of d‐spacing of NC or intercalation of NBR chains and formation of exfoliated structure, while some agglomerates of MCC were detected. Curing characteristics of the studied composites showed that incorporation of the fillers into the NBR, in particular the NC, causes an increase in the torque, indicating a higher degree of crosslinking. Furthermore, different from micron size MPCW and MCC, the NC accelerated the vulcanization reaction. It was also found that the use of NC and MPCW results in a remarkable increase in the mechanical and rheological properties compared with pure NBR. All in all, variations in the aforementioned criteria were attributable to the extent of matrix/filler interaction reflected by scanning electron micrographs. The correlation established between the microstructure and characteristics of the prepared NBR composites can shed some light on how to develop composites with enhanced properties by incorporating waste materials into the polymers. J. VINYL ADDIT. TECHNOL., 23:13–20, 2017. © 2015 Society of Plastics Engineers     

Representation and analysis of enterprise models with semantic techniques: an application to ArchiMate,e3value and business model canvas

Enterprise models assist the governance and transformation of organizations through the specification, communication and analysis of strategy, goals, processes, information, along with the underlying application and technological infrastructure. Such models cross-cut different concerns and are often conceptualized using domain-specific modelling languages. This paper explores the application of graph-based semantic techniques to specify, integrate and analyse multiple, heterogeneous enterprise models. In particular, the proposal described in this paper (1) specifies enterprise models as ontological schemas, (2) uses transformation mapping functions to integrate the ontological schemas and (3) analyses the integrated schemas with graph querying and logical inference. The proposal is evaluated through a scenario that integrates three distinct enterprise modelling languages: the business model canvas, e3value, and the business layer of the ArchiMate language. The results show, on the one hand, that the graph-based approach is able to handle the specification, integration and analysis of enterprise models represented with different modelling languages and, on the other, that the integration challenge resides in defining appropriate mapping functions between the schemas.     

Performance evaluation of hybrid FFA-ANFIS and GA-ANFIS models to predict particle size distribution of a muck-pile after blasting

Accurately predicting the particle size distribution of a muck-pile after blasting is always an important subject for mining industry. Adaptive neuro-fuzzy inference system (ANFIS) has emerged as a synergic intelligent system. The main contribution of this paper is to optimize the premise and consequent parameters of ANFIS by firefly algorithm (FFA) and genetic algorithm (GA). To the best of our knowledge, no research has been published that assesses FFA and GA with ANFIS for fragmentation prediction and no research has tested the efficiency of these models to predict the fragmentation in different time scales as of yet. To show the effectiveness of the proposed ANFIS-FFA and ANFIS-GA models, their modelling accuracy has been compared with ANFIS, support vector regression (SVR) and artificial neural network (ANN). Intelligence predictions of fragmentation by ANFIS-FFA, ANFIS-GA, ANFIS, SVR and ANN are compared with observed values of fragmentation available in 88 blasting event of two quarry mines, Iran. According to the results, both ANFIS-FFA and ANFIS-GA prediction models performed satisfactorily; however, the lowest root mean square error (RMSE) and the highest correlation of determination (R²) values were obtained from ANFIS-GA model. The values of R² and RMSE obtained from ANFIS-GA, ANFIS-FFA, ANFIS, SVR and ANN models were equal to (0.989, 0.974), (0.981, 1.249), (0.956, 1.591), (0.924, 2.016) and (0.948, 2.554), respectively. Consequently, the proposed ANFIS-GA model has the potential to be used for predicting aims on other fields.