Interfacing Renewable Energy Sources to the Utility Grid Using a Three-Level Inverter

This paper presents a novel approach for the connection of renewable energy sources to the utility grid. Due to the increasing power capability of the available generation systems, a three-level three-phase neutral-point-clamped voltage-source inverter is selected as the heart of the interfacing system. A multivariable control law is used for the regulator because of the intrinsic multivariable structure of the system. A current source (playing the role of a generic renewable energy source) is connected to the grid using a three-level inverter in order to verify the good performance of the proposed approach. Large- and small-signal d-q state-space averaged models of the system are obtained and used to calculate the multivariable controller based on the linear quadratic regulator technique. This controller simultaneously regulates the dc-link voltage (to operate at the maximum power point of the renewable energy source), the mains power factor (the power is delivered to the grid at unity power factor), and the dc-link neutral-point voltage balance. With the model and regulator presented, a specific switching strategy to control the dc-link neutral-point voltage is not required. The proposed controller can be used for any application, since its nature makes possible the control of any system variable. The good performance of the presented interfacing solution in both steady-state and transient operation is verified through simulation and experimentation using a 1-kW neutral-point-clamped voltage-source-inverter prototype, where a PC-embedded digital signal processor board is used for the controller implementation     

Reactive polymer coatings: a first step toward surface engineering of microfluidic devices

We report fabrication, characterization, and use of microfluidic analysis devices containing surface-immobilized cell-capturing molecules. Amino-terminated biotin ligands are immobilized onto the luminal surface of a microdevice and effectively support self-assembly of proteins, antibodies, and mammalian cells. For this purpose, chemical vapor deposition (CVD) polymerization is used to functionalize PDMS-made microfluidic devices with poly[para-xylylene carboxylic acid pentafluorophenolester-co-para-xylylene]. The resulting reactive coating shows excellent adhesion when deposited in thin films (approximately 100 nm, and the distribution of the pentafluorophenol ester groups is reasonably uniform within the microchannel inner surface, as examined by fluorescence microscopy. The utility of these devices for cell-based bioassays is demonstrated by monitoring the concentration-dependent effect of the disintegrin echistatin on cell adhesion. The described assay format could be relevant to clinical research in various fields, including angiogenesis research.     

Conducted EMI Reduction in Power Converters by Means of Periodic Switching Frequency Modulation

Spread spectrum clock generation techniques were originally developed to reduce electromagnetic interference (EMI) in communications and microprocessor systems working in the range of hundreds of megahertz. Nowadays, the switching frequency of power converters has been increasing up to values that make worthy the application of such switching frequency modulation techniques to reduce EMI emissions in power converters. Although random modulations have been applied before to power converters, periodic patterns can provide some advantages. First, theoretical principles of frequency modulation using three periodic patterns for the modulating function are presented. The influence of some important modulation parameters on the EMI reduction is analyzed and some considerations about the EMI filters design are also presented. The effectiveness of such methods in terms of EMI reduction is demonstrated theoretically and confirmed with experimental results obtained from tests carried out on two converters. The first one is a 2.5 W buck converter that can be switched up to 1 MHz and the second one is a 600 W boost converter switching at 40 kHz. In both cases, attenuations obtained in conducted EMI are evaluated. Finally, special attention has been paid to input current and output voltage ripple in order to evaluate possible undesired side-effects produced by this technique.     

Fibrinogen degradation products in acute pulmonary thromboembolism

With a view to ascertaining the possible role of water content of the cells in the reported elevated values for proton spin-lattice relaxation time (T1) in malignant tissues, measurements of percent water content as well as T1 were undertaken in 68 cases of normal and concerous tissues from diverse sites in human patients. T1 values for the uninvolved samples were found to lie in the range of 400-1000 msec while the corresponding range for the involved samples was from 450-1520 msec. Water content of both normal and uninvolved tissues mostly lay in the narrow range of 70-90%. Occasionally samples with large T1 values showed lower water content as well. Data obtained weakens the case for characterization of tumor cells on the basis of their water content alone.     

Electronic effects in manganite/insulator interfaces: interfacial enhancement of the insulating tunneling barriers

The transport properties across perovskite oxides heterointerfaces are analyzed. Epitaxial La(2/3)Ca(1/3)MnO3/SrTiO3 (LCMO/STO) heterostructures with different STO insulating-barrier thicknesses are systematically investigated and their behavior compared with LCMO/metal junctions. Atomic force microscopy (AFM) measurements in current-sensing mode show typical features associated with tunneling conduction. Careful analysis of the I-V curves across LCMO/STO heterointerfaces, using the Simmons model in the intermediate voltage range, clearly shows the existence of an interface-induced enhancement of the tunneling barrier of about 1.6 nm on the LCMO side. These results confirm recent theoretical studies predicting electronic phase segregation and the formation of an orbital-ordered insulating phase at the manganite-insulator interface that is a result of the reduction in the number of charge carriers at the interface.     

A Fast and Reliable UHPLC-PDA Method for Determination of Patulin in Apple Food Products Using QuEChERS Extraction

A fast and reliable method for the quantification of patulin using ultra high performance liquid chromatography coupled to a photodiode array detector was developed and validated for the analysis of several apple-based foodstuffs. Sample preparation was based on the QuEChERS procedure. Samples were extracted with acetonitrile and partitioned with a mixture of sodium citrate, NaCl, and Mg₂SO₄. The cleanup step was performed using dispersive SPE mixed with Mg₂SO₄ and PSA. This step was carried out twice in order to improve chromatographic results. The method was validated in spiked cloudy apple juice, apple puree, apple yogurt, beer with apple juice, and cider and applied to 24 commercial samples. The limits of detection and limits of quantification were ≥0.4 and ≥2 ng/g, respectively. Both were below the maximum legal limit established by the European Union. Recoveries for all the matrices were between 78.4 and 94.7 % while relative standard deviations were between 3.8 and 10.4 %. Patulin was detected on four apple juices from concentrate, one cloudy apple juice from an eco-store, and one beer. Nevertheless, the highest concentration found was 25.4 ng/g.     

New simplified method for the simulation of conducted EMI generated by switched power converters

A new simplified simulation method for the calculation of conducted electromagnetic interference (EMI) caused by switched power converters (SPCs) is presented. EMI simulation in real SPCs presents particular problems due to complex geometry and the wide range of time constants involved. This makes the computation of EMI a complex matter. The method presented here is based on a "source propagation path-derived disturbance" simulation process and is specially designed to simplify the mentioned computation problems. In the design of the proposed method, quick and robust simulations were preferred rather than very accurate results. The resulting models allow quite accurate predictions and sensitivity analysis when certain changes in components or layout are introduced. The paper presents two validation cases, where simulation and experimental results of conducted EMI generated by a general-purpose VSI, with different switching patterns and different layout, are compared.     

Functional Analyses of Four CYP1A1 Missense Mutations Present in Patients with Atypical Femoral Fractures

Osteoporosis is the most common metabolic bone disorder and nitrogen-containing bisphosphonates (BP) are a first line treatment for it. Yet, atypical femoral fractures (AFF), a rare adverse effect, may appear after prolonged BP administration. Given the low incidence of AFF, an underlying genetic cause that increases the susceptibility to these fractures is suspected. Previous studies uncovered rare CYP1A1 mutations in osteoporosis patients who suffered AFF after long-term BP treatment. CYP1A1 is involved in drug metabolism and steroid catabolism, making it an interesting candidate. However, a functional validation for the AFF-associated CYP1A1 mutations was lacking. Here we tested the enzymatic activity of four such CYP1A1 variants, by transfecting them into Saos-2 cells. We also tested the effect of commonly used BPs on the enzymatic activity of the CYP1A1 forms. We demonstrated that the p.Arg98Trp and p.Arg136His CYP1A1 variants have a significant negative effect on enzymatic activity. Moreover, all the BP treatments decreased CYP1A1 activity, although no specific interaction with CYP1A1 variants was found. Our results provide functional support to the hypothesis that an additive effect between CYP1A1 heterozygous mutations p.Arg98Trp and p.Arg136His, other rare mutations and long-term BP exposure might generate susceptibility to AFF.     

EMI Susceptibility Model of Signal Conditioning Circuits Based on Operational Amplifiers

Circuits based on operational amplifiers (OPAMPs) are susceptible to electromagnetic interference (EMI) in the radio-frequency range due to the AM demodulation produced by non-linearity of internal transistors. Such a phenomenon produces demodulated signals in the low-frequency range. This paper presents a model to predict the susceptibility of analog signal-conditioning circuits, based on a few test parameters, while ignoring the internal structure of OPAMPs involved in the circuit. The method has been experimentally tested in two applications: (1) test of simple instrumentation adapter circuits and (2) predictions of susceptibility of an amplifier for an electret microphone, tested according to EN55020.