Scientometrics of the international journal Scientometrics

An analysis of 1317 papers published in first fifty volumes during 1978 to 2001 of the international journal Scientometrics indicates the heterogeneity of the field with emphasis on scientometric assessment. The study indicates that the US share of papers is constantly on the decline while that of the Netherlands, India, France and Japan is on the rise. The research output is highly scattered as indicated by the average number of papers per institution. The scientometric output is dominated by the single authored papers, however, multi-authored papers are gaining momentum. Similar pattern has been observed for domestic and international collaboration.     

Ascorbic acid imprinted polymer-modified graphite electrode: A diagnostic sensor for hypovitaminosis C at ultra trace ascorbic acid level

A new kind of molecularly imprinted polymer-modified graphite electrode was fabricated by “grafting-to” approach, incorporating sol–gel technique, for the detection of acute deficiency in serum ascorbic acid level (SAAL), manifesting hypovitaminosis C. The modified electrode exhibited ascorbic acid (AA) oxidation at less positive potential (0.0 V) than the earlier reported methods, resulting in a limit of detection as low as 6.13 ng mL⁻¹ (RSD = 1.2%, S/N = 3). The diffusion coefficient (1.096 × 10⁻⁵ cm² s⁻¹), rate constant (7.308 s⁻¹), and Gibb's free energy change (−12.59 kJ mol⁻¹) due to analyte adsorption, were also calculated to explore the kinetics of AA oxidation. The proposed sensor was found to enhance sensitivity substantially so as to detect ultra trace level of AA in the presence of other biologically important compounds (dopamine, uric acid, etc.), without any cross interference and matrix complications from biological fluids and pharmaceutical samples.     

Thermoelectric Properties of Two-Phase PbTe with Indium Inclusions

The thermoelectric figure of merit (zT) can be increased by introduction of additional interfaces in the bulk to reduce the thermal conductivity. In this work, PbTe with a dispersed indium (In) phase was synthesized by a matrix encapsulation technique for different In concentrations. x-Ray diffraction analysis showed single-phase PbTe with In secondary phase. Rietveld analysis did not show In substitution at either the Pb or Te site, and this was further confirmed by room-temperature Raman data. Low-magnification (~1500×) scanning electron microscopy images showed micrometer-sized In dispersed throughout the PbTe matrix, while at high magnification (150,000×) an agglomeration of PbTe particles in the hot-pressed samples could be seen. The electrical resistivity (ρ) and Seebeck coefficient (S) were measured from 300 K to 723 K. Negative Seebeck values showed all the samples to be n-type. A systematic increase in resistivity and higher Seebeck coefficient values with increasing In content indicated the role of PbTe-In interfaces in the scattering of electrons. This was further confirmed by the thermal conductivity (κ), measured from 423 K to 723 K, where a greater reduction in the electronic as compared with the lattice contribution was found for In-added samples. It was found that, despite the high lattice mismatch at the PbTe-In interface, phonons were not scattered as effectively as electrons. The highest zT obtained was 0.78 at 723 K for the sample with the lowest In content.     

Effect of supercritical CO2 extraction process parameters on oil yield and pigment content from by‐product hemp cake

This research gives an insight into the possibility of exploiting the one of the food industry's by‐products – pressed hemp cake. The complete recovery of oil from pressed hemp cake was achieved. Residual oil that remained in cake after pressing was extracted with supercritical CO₂ by applying different process parameters. Optimal extraction conditions were determined using response surface methodology. Total pigment contents of the oils obtained were determined. Extraction pressure had the most significant influence on yield and pigment content of extracted hemp cake oil. Depending on the pressure, the chlorophyll a content ranged from 101.11 to 378.28 mg kg^?1 and chlorophyll b from 65.14 to 189.78 mg kg^?1, while total carotene content was in the range from 33.58 to 132.67 mg kg^?1. The remaining oil in pressed hemp cake after supercritical CO₂ extraction was determined to be 0.56 ± 0.08% and the defatted cake was rich in proteins and fibre.     

Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes

This study investigates the effect of a wood shaving treatment on the physico-mechanical characteristics of wood sand concretes. The two main objectives of this work are to improve a lightweight sand concrete and to valorise local materials and industrial wastes. Three wood shaving contents, two types of sand concretes (dune and river sand concrete) and a preliminary wood shaving treatment have been used. Sand, cement, filler, admixture and water composed the sand concrete matrix. The shaving treatment appreciably increases the mechanical strength of the studied composites without a large influence on thermal conductivity. The shrinkage of the composite is considerably reduced and the wood–matrix adherence is improved. At low wood contents, the dune sand concrete remains always slightly more insulating and less strong than the river sand concrete. At higher wood contents, the two concretes present almost similar properties.     

Aspects of varying crosslinker and catalyst concentrations on tear strength of silicone polymer networks: Comparison of tear strengths using samples of different geometries

Crosslinker and catalyst concentrations have been varied to prepare different hydroxyfunctional poly(dimethylsiloxane) (HOPDMS) polymer network compositions. The tear strengths of these silicone polymer networks have been measured using different geometries, as trouser, crescent, and Graves (angled) specimens. It has been observed that the results of tear strength of Graves and crescent‐shaped specimens do not show a constant ratio with the concentration of crosslinker used for curing of HOPDMS networks. Instead, it has been observed and reported for the first time that the tear strengths of Graves and crescent‐shaped samples show a crossover at about 1.2% crosslinker. The observation of this crossover pattern for different compositions of silicone networks show that it is difficult to compare the results of the tear test of the same polymer performed on samples of different geometries with one another. The crossover pattern of the tear energy results for the test specimens of two different geometries has been explained in the light of essential work facture theory based on the geometry of the testing sample, crosslinking, and testing that alters the distribution of force over the width of the specimen. It was shown that the change in composition of the HOPDMS networks changes the order of ranking of Graves and crescent tear tests. With varying catalyst concentration in the silicone network composition, the tear property differences between the Graves and crescent‐shaped specimens are not significant. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43115.     

Influence des fumées de silice sur l’évolution de l’hydratation des pâtes de chaux ou de Ciment Portland

The silica fume (SF) is used in civil engineering, in particular for the manufacture of high performance concrete.In order to better understand the gain in strength of the concretes containing SF, the microstructural aspect has been examined.Mixtures of SF–Lime pastes present a hydraulic setting which is due to the formation of a C–S–H phase (calcium silicate hydrate). The latter is semi-crystallized. It is characterized by the lines of X-ray diffraction, hk0 such as: 3,06 Å (220), 2,80 Å (400) and 1,83 Å (040).The mix design SF–Lime paste is thus a simplified approach of that of the mixtures SF–OPC in which the main reaction is the fixation, by the SF, of lime coming from the hydration of C₃S in the form of C–S–H.Tests have been carried out on two varieties of SF resulting from the same furnace with the presence of lime or Portland cement. The results show that the presence of certain impurities, by their actions on the solubility of silica plays a significant role on the evolution of the hydration of the principal components of Portland cements and the kinetics of lime fixation by the SF.Among the impurities contained in the SF, carbon delays considerably the hydration of the principal components of Portland cement (C₃S and C₃A) as well as the pozzolanic reactivity of the silica fume without removing it.     

Phytoextraction of Au: Uptake,accumulation and cellular distribution in Medicago sativa and Brassica juncea

The influence of metal concentration, solution pH and exposure time on the phytoextraction (i.e. separation using vascular plants) of Au was investigated for the known metallophytes Brassica juncea (BJ) and Medicago sativa (MS). Metal uptake was inferred using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and in vivo localisation and distribution using proton induced X-ray emission spectroscopy (μ-PIXE). MS roots accumulated a maximum of 287 mg Au g^?1 (dry biomass) and BJ roots a maximum of 227 mg Au g^?1 (dry biomass), both when exposed to a 10,000 ppm aqueous solution of KAuCl_4. MS was found to accumulate comparatively greater quantities of Au than BJ across higher substrate concentrations (40–10,000 ppm Au) whereas BJ was found to be a better accumulator of Au at lower concentrations (5–20 ppm Au). In general MS showed an increase in Au uptake with an increase in Au substrate concentration and the time exposed, whereas for BJ the maximum uptake was observed after 48 h of exposure at higher concentrations (100–10,000 ppm), and then decreased at longer exposure times. The uptake ratio (UR), defined as the ratio of Au concentration in plant tissues to the concentration in the substrate, increased with increasing concentration and exposure time, to a maximum of 995 for MS roots after 72 h exposure. Metal translocation from roots to shoots in BJ increased with increasing substrate concentration, however in the shoots, metal uptake increased from 24 to 48 h and then decreased at 72 h, indicating some threshold level had been reached and metal was then being excluded from the cells, possibly through the phloem to the Au solution. Elemental distribution maps of plant tissues measured using μ-PIXE, show Au present across the entire sample, ranging from the epidermis and cortex, with the greatest concentration occurring within the central stele. This result is suggestive of xylem loading. These results collectively suggest that the separation of Au using vascular plants for applications in mining (phytomining) and remediation (phytoremediation) are viable technologies.     

Molecular and immunological analysis of an ABC transporter complex required for cytochrome c biogenesis

The helABC genes are predicted to encode an ATP-binding cassette (ABC) transporter necessary for heme export for ligation in bacterial cytochrome c biogenesis. The recent discoveries of homologs of the helB and helC genes in plant mitochondrial genomes suggest this is a highly conserved transporter in prokaryotes and some eukaryotes with the HelB and HelC proteins comprising the transmembrane components. Molecular genetic analysis in the Gram-negative bacterium Rhodobacter capsulatus was used to show that the helABC and helDX genes are part of an operon linked to the secDF genes. To facilitate analysis of this transporter, strains with non-polar deletions in each gene, epitope and reporter-tagged HelABCD proteins, and antisera specific to the HelA and HelX proteins were generated. We directly demonstrate that this transporter is present in the cytoplasmic membrane as an HelABCD complex. The HelB and HelC but not HelD proteins are necessary for the binding and stability of the HelA protein, the cytoplasmic subunit containing the ATP-binding region. In addition we show that the HelA protein co-immunoprecipitates with either the HelC or HelD proteins. Thus, the HelABCD heme export complex is distinguished by the presence of four membrane-associated subunits and represents a unique subfamily of ABC transporters.