Enhancing electrochromic properties of polypyrrole by silsesquioxane nanocages

A new monomer, octa(thiophenephenyl)silsesquioxane (OThiophenePS) was synthesized via click chemistry. The chemical structure of OThiophenePS was characterized by nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FT-IR) spectroscopies. Electrochemical polymerization of pyrrole with OThiophenePS was performed resulting in polypyrrole-attached, polyhedral oligomeric silsesquioxane (OPS–PPy). The spectroelectrochemical studies show that the electrochromic properties of (OPS–PPy) are superior to those of polypyrrole (PPy). This great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching brought by the loose packing of the PPy chains.     

Event Distortion-Based Clustering Algorithm for Energy Harvesting Wireless Sensor Networks

Wireless Personal Communications - Wireless sensor networks (WSNs) consist of compact deployed sensor nodes which collectively report their sensed readings about an event to the Base Station (BS)....     

Auto-tuning of PID controller according to fractional-order reference model approximation for DC rotor control

This paper presents a stochastic, multi-parameters, divergence optimization method for the auto-tuning of proportional–integral–derivative (PID) controllers according to a fractional-order reference model. The study aimed to approximate the step response of the real closed-loop flight control system to the response of a theoretical reference model for a smoother and more precise flight control experience. The proposed heuristic optimization method can auto-tune a PID controller without a precise plant model. This is very advantageous when dealing with model and parameter uncertainties in real control application and practice. Experimental study confirms the reference model driven auto-tuning of the DC rotor prototype.     

The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes

The effect of initial water-curing period on the strength properties of concretes was investigated. Three types of cement, one ordinary Portland cement (OPC) and two natural pozzolanic cements (blended and trass cements), were used in the concrete mixtures. Six different curing regimes were applied to the specimens, the first of which was continuous water storing, and the second continuous air storing. In the remaining four regimes, the specimens were stored under varying initial water-curing periods of 3, 7, 14, and 28 days, respectively. The compressive strength tests were carried out on the cubic specimens at the ages of 7, 14, 28, 90, and 180 days. The variation of compressive strength with time was evaluated by using a semilogarithmic function and the strength-gaining rates were calculated by using this equation for different curing conditions. It was found that poor curing conditions are more adversely effective on the strength of concretes made by pozzolanic cements than that of OPC, and it is necessary to apply water curing to the former concretes at least for the initial 7 days to expose the pozzolanic activity. However, when the pozzolanic cement concretes have sufficient initial curing, they can reach the strength of OPC concretes in reasonable periods of time.     

Microfabrication of vacuum-sealed cavities with nanocrystalline and ultrananocrystalline diamond membranes and their characteristics

Vacuum-sealed cavities featuring diamond membranes are fabricated using plasma-activated direct bonding technology. A chemical mechanical polished (CMP) silicon dioxide interlayer, deposited on diamond with a high temperature oxide (HTO) process at 850 °C in a low pressure chemical vapor deposition (LPCVD) furnace, is employed for successful direct bonding and vacuum cavity formation. The circular cavities are defined on the thermally grown oxide of the phosphorus-doped Si wafer (4-in, < 100>, 1.2 Ω/sq) using reactive ion etching (RIE). The same microfabrication steps are applied for low residual stress (i.e. < 50 MPa) nanocrystalline (NCD) and ultrananocrystalline (UNCD) diamonds to determine and compare membrane characteristics. For both diamond types, successful microfabrication of membranes is demonstrated using the optimized process flow. Profilometer measurements of membrane deflection are compared with finite element modeling (FEM), and indicate a Young's modulus of 1000 GPa for NCD and 850 GPa for UNCD. Furthermore, FEM analysis suggests the residual stress of UNCD membrane is approximately 100 MPa tensile, whereas NCD one does not show any significant residual stress (< 50 MPa). Our results show that NCD is a more promising choice than UNCD as a membrane material for electromechanical transducers.     

Integrated process design,scheduling, and model predictive control of batch processes with closed-loop implementation

Simultaneous evaluation of multiple time scale decisions has been regarded as a promising avenue to increase the process efficiency and profitability through leveraging their synergistic interactions. Feasibility of such an integral approach is essential to establish a guarantee for operability of the derived decisions. In this study, we present a modeling methodology to integrate process design, scheduling, and advanced control decisions with a single mixed-integer dynamic optimization (MIDO) formulation while providing certificates of operability for the closed-loop implementation. We use multi-parametric programming to derive explicit expressions for the model predictive control strategy, which is embedded into the MIDO using the base-2 numeral system that enhances the computational tractability of the integrated problem by exponentially reducing the required number of binary variables. Moreover, we apply the State Equipment Network representation within the MIDO to systematically evaluate the scheduling decisions. The proposed framework is illustrated with two batch processes with different complexities.     

Multichromic polymers based on pyrene clicked thienylpyrrole

In this study, the effect of pendant pyrene on the optical and electronic properties of poly(2,5‐dithienylpyrrole)s was studied. For this purpose a new pyrene coupled 2,5‐dithienylpyrrole derivative (SNS‐pyrene) was synthesized through click reaction. SNS‐pyrene was electrochemically polymerized and its electrochemical and optical properties were investigated by electrochemical and optical techniques. The polymer had a band gap of 3.36 eV and displayed light green to blue color variation upon oxidation in less than 2.48 s. Additionally, electrochemical copolymerization of SNS‐pyrene with 3,4‐ethylenedioxythiophene was achieved whilst a detailed investigation was performed on the effect of electrochemical polymerization conditions on the optoelectronic properties of the copolymers. Studies revealed that the copolymers exhibit multichromic reversible redox behavior with lower band gaps and shorter switching times than their parent polymer, P(SNS‐pyrene) © 2014 Society of Chemical Industry.     

Pressure control system for electrospinning process

Electrospinning is used to produce micro‐ and nano‐sized synthetic fibers through the use of electrostatic forces. Commercially, viable production of fibers requires high throughput of uniform fibers that are free of defects. To achieve greater control over the process variables that affect the fiber formation, a scalable closed loop control system that can maintain a constant pressure at the capillary tip was designed and tested. Two sensing technologies, infrared and ultrasonic, were used and compared for their ability to detect the height of polymer solution in the electrospinning fluid container. The air pressure above the solution was measured with a pressure transducer and adjusted through a controllable syringe pump. The closed loop electrospinning system was successful at controlling and maintaining a constant pressure at the capillary tip to within 2% of the specified pressure continuously. The controlled pressure at the capillary tip showed a strong correlation to fiber diameter and uniformity for polydimethylsiloxane‐based polyurethane/DMF‐based fibers. However the control system was less effective to control fiber diameter for polyethylene oxide/Water‐based fibers. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers