Microwave-Assisted Graphite-Support Synthesis of Imidazolones

5(4H)-Oxazolones react with ammonium acetate under microwave irradiation and using graphite as support in an eco-friendly process. The reaction was carried out under solvent-free conditions and the imidazolones were obtained quantitatively. Moreover the reaction time was reduced too.     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Effects of vesnarinone, a novel orally active inotropic agent with an immunosuppressive action, on experimental cardiac transplantation in rats

BACKGROUND: Vesnarinone (VES) has been used for treatment of patients with congestive heart failure. In addition to inotropic effects, it seems to have immunosuppressive action. We tested the hypothesis that VES suppresses graft rejection, inotropic dysfunction caused by early rejection, and chronic coronary obstruction in a heterotopic rat cardiac transplantation model. METHODS: (1) To study acute rejection, hearts from Lewis-Brown Norway (LBN) rats were transplanted into Lewis rats, which were treated with or without VES (50 or 100 mg/kg/day orally). (2) In a functional study, LBN hearts with or without VES (100 mg/kg/ day) were isolated and perfused on day 3 after transplantation to assess inotropic response to isoproterenol (3 x 10(-8) M). (3) To study chronic rejection, Lewis hearts were transplanted into Fisher 344 rats, which were treated with or without VES (50 mg/kg/day) for 90 days. Coronary obstructive disease was assessed by morphometric analysis. There were five to six animals in each group. RESULTS: (1) VES (100 mg/kg/day) prolonged LBN heart survival (11.7 +/- 0.7 vs. 9.6 +/- 0.7 days in control; P < 0.05). (2) Left ventricular developed pressure was depressed in transplanted hearts regardless of VES treatment (84 +/- 12, 90 +/- 8 vs. 144 +/- 16 mmHg in untransplanted hearts; P < 0.01). The developed pressure after administration of isoproterenol in VES-treated hearts (184 +/- 20 mmHg) was higher than transplanted hearts without VES (118 +/- 16 mmHg; P < 0.05), and similar to untransplanted hearts (203 +/- 27 mmHg; P = NS). (3) Transplanted hearts treated with or without VES showed similar grades of rejection (2.0 +/- 0.3 vs. 2.6 +/- 0.2; P = NS), intimal area (6,996 +/- 3,186 vs. 13,441 +/- 5,165 microns2; NS), and coronary luminal obstruction (45 +/- 16% vs. 67 +/- 14%; NS). CONCLUSIONS: VES produces mild prolongation in survival of rat heart grafts, but has no significant effect on chronic graft atherosclerosis. VES preserves the positive inotropic effects of isoproterenol that are otherwise deteriorated by early acute rejection.     

Strength evaluation of granite block samples with different predictive models

Over the last decade, application of soft computing techniques has rapidly grown up in different scientific fields, especially in rock mechanics. One of these cases relates to indirect assessment of uniaxial compressive strength (UCS) of rock samples with different artificial intelligent-based methods. In fact, the main advantage of such systems is to readily remove some difficulties arising in direct assessment of UCS, such as time-consuming and costly UCS test procedure. This study puts an effort to propose four accurate and practical predictive models of UCS using artificial neural network (ANN), hybrid ANN with imperialism competitive algorithm (ICA–ANN), hybrid ANN with artificial bee colony (ABC–ANN) and genetic programming (GP) approaches. To reach the aim of the current study, an experimental database containing a total of 71 data sets was set up by performing a number of laboratory tests on the rock samples collected from a tunnel site in Malaysia. To construct the desired predictive models of UCS based on training and test patterns, a combination of several rock characteristics with the most influence on UCS has been used as input parameters, i.e. porosity (n), Schmidt hammer rebound number (R), p-wave velocity (V_p) and point load strength index (Is(50)). To evaluate and compare the prediction precision of the developed models, a series of statistical indices, such as root mean squared error (RMSE), determination coefficient (R²) and variance account for (VAF) are utilized. Based on the simulation results and the measured indices, it was observed that the proposed GP model with the training and test RMSE values 0.0726 and 0.0691, respectively, gives better performance as compared to the other proposed models with values of (0.0740 and 0.0885), (0.0785 and 0.0742), and (0.0746 and 0.0771) for ANN, ICA–ANN and ABC–ANN, respectively. Moreover, a parametric analysis is accomplished on the proposed GP model to further verify its generalization capability. Hence, this GP-based model can be considered as a new applicable equation to accurately estimate the uniaxial compressive strength of granite block samples.

     

On the application of Harris hawks optimization (HHO) algorithm to the design of microchannel heat sinks

Engineering with Computers - A novel Harris hawks optimization algorithm is applied to microchannel heat sinks for the minimization of entropy generation. In the formulation of the heat transfer...     

Microstructure and Sliding Wear Behaviour of Ni(Cr)-TiB_2 Coatings Deposited by HVOF Spraying of SHS Powders

THERMAL SPRAYING provides a large range ofcoatings,which increase the wear resistance ofsubstrates[1].One of the major coating families is thecermet,composed of hard ceramic particles with ametallic binder.The most commonly used cermetcoatings in industrial applications are based on eitherthe WC-Co or the Cr3C2-Ni(Cr)systems with WC-17wt%Co and Cr3C2-25wt%Ni(Cr)being typicalcompositions[2,3].Although WC-Co deposits are hardand wear resistant at ambient temperatures their rangeof ap…     

Towards improved parallelism through order reduction of accessing data in nD matrices

This paper encompasses the presentation of an enhanced approach with the capacity to reduce the time complexity of accessing nodes in m-dimensional matrices from \(O(n^m)\) to \(O(n\log n)\) . The accomplishment of this process is attained by the serialization of nD (nD) matrices to single-dimensional arrays followed by the access of nodes accordingly. Linear representation of nD matrix data structure induces a superior parallelism of matrix calculations over dense, parallel core micro-architecture computers, including NVIDIA GPGPU Supercomputing and Intel Xeon Phi processing boards. This approach is feasibly implemented as the core of matrix data representation in Math software such as Matlab, Mathematica and Maple, in IDEs for more optimized code generation and in Parallel Computing Libraries such as CUBLAS and Magma.     

A robust optimization approach for pollution routing problem with pickup and delivery under uncertainty

Organizations have recently become interested in applying new approaches to reduce fuel consumptions, aiming at decreasing green house gases emission due to their harmful effects on environment and human health; however, the large difference between practical and theoretical experiments grows the concern about significant changes in the transportation environment, including fuel consumptions, carbon dioxide (CO₂) emissions cost and vehicles velocity, that it encourages researchers to design a near-reality and robust pollution routing problem. This paper addresses a new time window pickup-delivery pollution routing problem (TWPDPRP) to deal with uncertain input data for the first time in the literature. For this purpose, a new mixed integer linear programming (MILP) approach is presented under uncertainty by taking green house emissions into consideration. The objective of the model is to minimize not only the travel distance and number of available vehicles along with the capacity and aggregated route duration restrictions but also the amount of fuel consumptions and green house emissions along with their total costs. Moreover, a robust counterpart of the MILP is introduced by applying the recent robust optimization theory. Computational results for several test problems indicate the capability and suitability of the presented MILP model in saving costs and reducing green house gases concurrently for the TWPDPRP problem. Finally, both deterministic and robust mathematical programming are compared and contrasted by a number of nominal and realizations under these test problems to judge the robustness of the solution achieved by the presented robust optimization model.     

Effect of stepped‐impedance resonators on rectangular metamaterial unit cells

In this article, effect of the stepped‐impedance resonator (SIR) miniaturization technique on rectangular metamaterial unit cells is investigated and the influence of the method's structural parameters on the characteristic impedance and the distance between higher resonance modes is discussed. According to the results, the ideal unit cell for this method should be thick enough and have an impedance ratio greater than one. Furthermore, the SIR technique is applied on a conventional two‐turn spiral metamaterial unit cell and a new compact spiral unit cell is introduced. The effect of this method on the unit cell parameters is investigated and the new unit cell is compared to the conventional spiral. According to the results, a miniaturization factor of 0.75 can be achieved with the new unit cell. To validate the results, a two dimensional array of the unit cell is fabricated and its S‐parameters are measured using the free space method. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:582–590, 2015.