Spanish Melon Landraces: Revealing Useful Diversity by Genomic,Morphological, and Metabolomic Analysis

Spain is a secondary centre of the diversification of the melon (Cucumis melo L.), with high diversity represented in highly appreciated landraces belonging to the Flexuosus and Ibericus groups. A collection of 47 accessions of Flexuosus, Chate, Piel de Sapo, Tendral, Amarillo, Blanco, and Rochet was analysed using a genotyping-by-sequencing (GBS) approach. A total of 66,971 quality SNPs were identified. Genetic analysis differentiated Ibericus accessions and exotic materials (Ameri, Momordica, Kachri, and Agrestis), while Flexuous accessions shared ancestry between them. Within the Ibericus group, no clear genomic distinction could be identified for the different landraces evaluated, with accessions of different landraces showing high genetic similarity. The morphological characterization confirmed that the external colour and fruit shape had been used as recognition patterns for Spanish melon landraces, but variability within a landrace exists. Differences were found in the sugars and acid and volatile profiles of the materials. Flexuosus and Chate melons at the immature commercial stage accumulated malic acid and low levels of hexoses, while Ibericus melons accumulated high contents of sucrose and citric acid. Specific trends could be identified in the Ibericus landraces. Tendral accumulated low levels of sugars and citric acid and high of malic acid, maintaining higher firmness, Rochet reached higher levels of sugars, and Amarillo tended to lower malic acid contents. Interestingly, high variability was found within landraces for the acidic profile, offering possibilities to alter taste tinges. The main volatile organic compounds (VOCs) in Flexuosus and Chate were aldehydes and alcohols, with clear differences between both groups. In the Ibericus landraces, general trends for VOC accumulation could be identified, but, again, a high level of variation exists. This situation highlights the necessity to develop depuration programs to promote on-farm in situ conservation and, at the same time, offers opportunities to establish new breeding program targets and to take advantage of these sources of variation.     

Experimental evaluation of geosynthetics as reinforcement for shotcrete

One of the commonly used stabilization systems for rock tunnels is shotcrete. This fine aggregate mortar is usually reinforced for improving its tensile and shear strength. In deep tunnels, its capacity to absorb energy has been recently considered for design purposes, as large displacements of the wall are expected. Two of the most used materials of reinforcement are steel welded-wire mesh and fibers (steel or polypropylene) in the shotcrete mix. This study presents the results and discussion of an experimental test program conducted to obtain the load-deformation curves of reinforced shotcrete, according to ASTM C 1550, using geosynthetics grids and geotextiles as alternative reinforcement materials. In addition, plain shotcrete and steel welded-wire mesh reinforced shotcrete specimens are also considered in the experimental program as benchmark cases. The experimental results are analyzed in terms of maximum strength and toughness. Results show that the use of geosynthetics as a reinforcement material is a promising alternative to obtain shotcrete with energy absorption capacity comparable with the most common reinforcement materials used.     

Application of Fast Gas Chromatography–Mass Spectrometry in Combination with the QuEChERS Method for the Determination of Pesticide Residues in Fruits and Vegetables

A fast gas chromatography–mass spectrometry method has been developed for multiresidue determination of up to 56 pesticides in fruits and vegetables in a chromatographic run time of <10 min, using a single quadrupole mass spectrometer operating in selected ion monitoring mode. The well-known acetate-buffering version of the QuEChERS method has been used for sample preparation. Programmable temperature vaporizer injection of 3 μL allowed reaching limits of detection between 0.15 and 15 μg/kg for most compounds in the sample matrices tested. The applicability of the method has been evaluated in apple, orange, carrot, and tomato. Recoveries at three fortification levels (0.01, 0.1 and 0.5 mg/kg) ranged from 70 to 120 % for most compounds, with relative standard deviations below 20 % in all cases. The developed method has been applied to fruit and vegetable samples from different Spanish provinces.     

Changes in wine yeast storage carbohydrate levels during preadaptation,rehydration and low temperature fermentations

The metabolism of glycogen and trehalose was analysed in a wine yeast strain fermenting at 25 and 13 degrees C. Trehalose and glycogen degradation were completed during the lag phase of fermentation. Ammonia was taken up rapidly and once it had been reduced to negligible amounts, the synthesis of trehalose started. Glycogen followed a similar pattern. If trehalose synthesis was taken as a stress indicator, the fermentation at 13 degrees C could not be considered stressful because the maximum concentrations are similar at both temperatures. In industrial fermentations, and after a preadaptation in grape must for several hours at 18 degrees C, the lag phase was reduced significantly, and this may be why trehalose and glycogen were completely depleted at the beginning of the low temperature fermentation. Various preadaptation conditions were tested so that their influence on trehalose and glycogen degradation could be determined. The presence of fermentable carbon sources, such as glucose or fructose, triggered the mobilisation and use of trehalose. However, just increasing the osmotic pressure did not reduce the trehalose content. No such differences were observed in glycogen metabolism.     

Accuracy of BRT and Delvotest microbial inhibition tests as affected by composition of ewe's milk

The presence of drug residues in ewe's milk samples can be determined by microbial assays. The main limitation of these tests is the large number of false-positive results associated with them. False-positive results can be explained by the interaction of certain substances naturally existing in ewe's milk with the growth of the microorganism used in the test. In this study, milk chemical composition (fat, protein, lactose, total solids), somatic cell counts (SCCs), free fatty acid concentrations, and lactoperoxidase system components were determined in order to investigate their influence on the rate of false-positive results for the BRT and Delvotest microbiological inhibitor tests. Milk samples were obtained after morning milking of Manchega ewes at 15, 30, 45, 60, 75, 90, 105, 120, and 135 days after parturition. The animals did not receive any kind of treatment or medicated feed throughout the experiment. The false-positive rates for BRT and Delvotest were 3.75 and 2.4%, respectively. When the logistic regression model was applied, the percentages of total solids for positive samples were significantly different from those for negative samples (16.90 versus 18.42% for BRT, 16.05 versus 18.45% for Delvotest), while the SCC logarithmic transformation was significantly higher for the positive samples than for the negative samples (5.38 versus 5.11 log units for BRT, 5.32 versus 5.11 log units for Delvotest). Moreover, Delvotest-positive samples exhibited thiocyanate concentrations higher than those of Delvotest-negative samples (8.18 mg/liter versus 6.85 mg/liter). Further analyses are needed to confirm the possible presence of antimicrobial residues in this particular type of milk sample.     

A self contained Linux based data acquisition system for 2D detectors with delay line readout

This article describes a fast and self-contained data acquisition system for 2D gas-filled detectors with delay line readout. It allows the realization of time resolved experiments in the millisecond scale. The acquisition system comprises of an industrial PC running Linux, a commercial time-to-digital converter and an in-house developed histogramming PCI card. The PC provides a mass storage for images and a graphical user interface for system monitoring and control. The histogramming card builds images with a maximum count rate of 5 MHz limited by the time-to-digital converter. Histograms are transferred to the PC at 85 MB/s. This card also includes a time frame generator, a calibration channel unit and eight digital outputs for experiment control. The control software was developed for easy integration into a beamline, including scans. The system is fully operational at the Spanish beamline BM16 at the ESRF in France, the neutron beamlines Adam and Eva at the ILL in France, the Max Plank Institute in Stuttgart in Germany, the University of Copenhagen in Denmark and at the future ALBA synchrotron in Spain. Some representative collected images from synchrotron and neutron beamlines are presented.     

Performance analysis of the domestic water meter park in water supply network of Ibarra,Ecuador

Apparent losses are one of the most important components of non-revenue water and mainly caused by water meter under-registration. This paper studies the performance of a water meter park from a developing country water utility in Ibarra city, Ecuador. The study includes three major aspects: water meter error curve reconstruction with seven different flow rates; water meter evaluation as a function of class, manufacturer and totalized registered volume, use of two water consumption patterns for weighted error determination and their influence on water balance and performance indicators analysis. Results indicate that 44% of analyzed meters works at optimal conditions. Weighted error obtained by using two different consumption patterns indicates a 0.95% difference, which has an important impact on water balance and performance indicator results. This detailed analysis of water meters can help to develop a more efficient water meter replacement strategy and to estimate apparent water loss volume more accurately.     

Phase equilibria of hydrates from ternary mixtures of methane + ethane + propane and methane + propane + carbon dioxide

Hydrate–liquid–vapour (HLV) equilibrium of aqueous clathrates formed from gas mixtures can be complex compared to hydrates formed with single guests. Typically, pressure and temperature are controlled to obtain these data, but for multicomponent systems, it is necessary to control/report more intensive variables, namely, composition. Metastability, manifested as impractically long experimental times, has been reported to be a challenge with some multicomponent systems. We present HLV equilibrium conditions of two ternary gas mixtures: methane + ethane + propane (90:7:3 molar ratio) and methane + propane + carbon dioxide (55:5:40 molar ratio). Conditions varied in the temperature range of 275–285 K and the pressure range of 1.24–4.75 MPa. Experimental standard uncertainties were on average 0.10 K and 0.005 MPa for methane + ethane + propane and 0.19 K and 0.005 MPa for methane + propane + carbon dioxide. Our technique allowed us to bypass the limitations reported in the literature and provided fast, reproducible HLV equilibria for gas-dominated systems.