Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

Inhibiting effects of serotonin and serotonin antagonists on the migration of mononuclear leucocytes

The effect of serotonin and the serotonin antagonists ketanserin, methiotepine and ICS-205-930 on the migration of leucocytes was studied by using the sealed capillary migration technique. The migration of mononuclear leucocytes was inhibited by serotonin at 10(-4) and 10(-6)-10(-10)mol/l. An inhibition of the mononuclear leucocyte migration was also caused by ICS-205-930 at 10(-4)mol/l, ketanserin at 10(-4) and 10(-8)-10(-10)mol/l and methiotepine at 10(-4) and 10(-6)-10(-8)mol/l. No inhibiting effects of serotonin or the serotonin antagonists were found on the migration of polymorphonuclear leucocytes. Thus, both serotonin and serotonin antagonists may inhibit mononuclear leucocyte migration.     

Eight-year exploration of shrinkage in high-performance concrete

In this paper, an experimental and analytical exploration on the effect of water-binder ratio (w/b), silica fume and age on autogenous, carbonation, drying and total shrinkage of high-performance concrete (HPC) is outlined. Eight types of HPC were studied. Carbonation, internal relative humidity (RH) and strength were studied on specimens from the same batch of HPC that was used in the studies of shrinkage. The results indicate fairly good correlation between carbonation, shrinkage, w/b and RH. The type and amount of silica fume affected shrinkage.     

Relationship between the attenuation of downwelling irradiance at 490 nm with the attenuation of PAR (400 nm-700 nm) in the Baltic Sea

The vertical attenuation coefficient of diffuse downwelling irradiance at 490 nm (K_d 490) is a parameter that we routinely derive from SeaWiFS images of the Baltic Sea. Here, through model simulations, we examine the relationship between K_d(490), and the vertical attenuation coefficient of PAR (K_d PAR), as this later coefficient determines the light available for aquatic photosynthesis. A simple semi-analytical model is used to predict K_d(490) and K_d(PAR), as a function of the concentrations of chlorophyll, colored dissolved organic material (CDOM), suspended inorganic, and suspended organic particulate material. A series of model simulations based on variations in these optically significant constituents over a range realistic for the Baltic Sea, are used to define the relationship between the two attenuation coefficients.

Kd(PAR)=0.6677Kd^0.6763(490).     

Data reconciliation and optimal operation of a catalytic naphtha reformer

The naphtha reforming process converts low-octane gasoline blending components to high-octane components for use in high-performance gasoline fuels. The reformer also has an important function as the producer of hydrogen to the refinery hydrotreaters. A process model based on a unit model structure, is used for estimation of the process condition using data reconciliation. Measurements are classified as redundant or non-redundant and the model variables are classified as observable, barely observable or unobservable. The computed uncertainty of the measured and unmeasured variables shows that even if a variable is observable it may have a very large uncertainty and may thereby be practically unobservable. The process condition at 21 data points, sampled from two years of operation, was reconciled and used to optimize the process operation. There are large seasonal variations in the reformer product price and two operational cases are studied. In case 1, the product price is high and throughput is maximized with respect to process and product quality constraints. In case 2, the product price is low and the throughput is minimized with respect to a low constraint on the hydrogen production. Based on the characteristics of the optimal operation, a “self optimizing” control structure is suggested for each of the two operational cases.     

On the internal frost resistance of self-compacting concrete, with and without polypropylene fibres

In this article experimental and numerical studies of internal frost resistance of self-compacting and normal concrete, with and without fibres, are outlined. For this purpose self-compacting concrete with low water-cement ratio was studied, with varying amounts of filler, crystalline or sedimentary, different pouring pressures and different mixing procedure with two ages at the start of testing. The concrete was frozen twice a day at ±20^∘C all around the specimen up to 300 cycles. Measurement of length, weight and internal fundamental frequency were performed at the start of testing, at 100 cycles and at 300 frost cycles. Tests were also carried out on submerged cast self-compacting concrete and on self-compacting concrete with fibres. In reference tests normal concrete was studied in parallel. In general self-compacting concrete behaved well or better than normal concrete to internal frost except for the submerged cast concrete, where large segregation occurred and low internal frost resistance followed. The main reasons for low internal frost resistance in submerged applications were probably differences in water-cement ratio in the casting due to cement, water or/and aggregate segregation. Polypropylene fibres in concrete seemed to prohibit the movement of water in the air void system so that a sudden internal collapse occurred before 300 frost cycles.     

Contradicting incentives for research collaboration

This study describes the Danish publication award system (BFI), investigates whether its built-in incentives have had an effect on publication behavior at the University of Southern Denmark, and discusses the possible future implications on researcher incentives should universities wish to measure BFI on the individual level. We analyzed publication data from the university CRIS system (Pure) and from SciVal. Several studies indicate that co-authored scholarly journal articles attract more citations than single author articles. The reason for this are not clear, however, research collaboration across institutions and countries is commonly accepted in the research community and among university managements as one way of increasing the researcher’s and institution’s reputation and impact. The BFI system is designed to award scholarly publication activity at Danish universities, especially publication in international journals of high status. However, we find that the built-in incentives leave the researcher and his or her institution with a dilemma: If the researchers optimize their performance by forming author groups with external collaborators, the optimal way of doing so for the researchers is not the optimal way seen from the perspective of the university. Our analysis shows that the typical article has 6.5 authors, two of which are internal, and that this has remained stable since the introduction of the BFI. However, there is variation across the disciplines. While ‘the Arts and Humanities’ and ‘the Social Sciences’ seem to compose author groups in a way which does not optimize the performance of the institution, both ‘Health’ and ‘the Natural Sciences’ seem to optimize according to criteria other than those specified in the BFI.     

Species identification by genotyping and determination of antibiotic resistance in Campylobacter jejuni and Campylobacter coli from humans and chickens in Sweden

Campylobacter is today the most common cause of human bacterial enteritis in Sweden, as well as in most other industrialized countries. Common sources of infection are undercooked chicken meat, unpasteurized milk and contaminated drinking water. One aim with our present study was to identify the species Campylobacter jejuni and Campylobacter coli strains from humans and chickens using a polymerase chain reaction/restriction enzyme analysis (PCR/REA) method, as well as traditional hippurate hydrolysis test. Another aim was to investigate the antibiotic resistance pattern of the human domestic C. jejuni/C. coli isolates from infected patients and isolates from healthy Swedish chicken, as well as isolates from humans infected abroad. If discrimination between C. jejuni and C. coli was based on testing for hippurate hydrolysis, 95% of the human domestic strains and 88% of the chicken strains were identified as C. jejuni. Based on genotyping by PCR/REA, 100% of the human domestic strains and 98% of the chicken strains were attributed to C. jejuni. The E-test and disc diffusion methods were used for phenotypic antibiotic resistance studies. The two methods gave similar results. Most Swedish C. jejuni/C. coli isolates both from humans and chickens were sensitive to doxycycline and erythromycin, which are antibiotics used to treat human infection. Only 7% of the human domestic strains and 2% of the chicken strains were resistant to the quinolones tested. As a comparison, more than 94% of strains isolated from travelers to Asia and southern Europe showed antibiotic resistance to one or more drugs.     

等离子喷涂纳米Al2O3-13TiO2陶瓷涂层研究

以常规和纳米团聚体Al2O3-13TiO2(ω/%,下同)复合陶瓷粉末为原料,采用等离子喷涂工艺在TiAl合金表面制备常规和纳米结构陶瓷涂层.用扫描电镜(SEM)和X射线衍射(XRD)仪分析粉末和涂层形貌、微观结构及相组成,同时对纳米结构涂层的微观组织形成机制进行了讨论.结果表明:常规复合陶瓷涂层呈典型的等离子喷涂层状堆积特征;纳米结构复合陶瓷涂层由部分熔化区以及与常规等离子喷涂类似的片层状完全熔化区组成.根据组织结构的不同,部分熔化区又分为亚微米A12O3粒子镶嵌在TiO2基质相的三维网状或骨骼状结构的液相烧结区和经过一定长大但仍保持在纳米尺度的残留纳米粒子的固相烧结区,不同的部分熔化组织源于复合陶瓷粉末中A12O3与TiO2之间的熔点差异.由于等离子喷涂过程中涂层沉积时的快速凝固作用,不管是常规还是纳米涂层都以亚稳相γ-A12O3为主.