High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Performance of in-call buffer/window allocation schemes for short intermittent file transfers over broadband packet networks

While static open loop rate controls may be adequate for handling continuous bit rate (CBR) traffic, relatively smooth data traffic, and relatively low speed bursty data traffic over broadband integrated networks, high speed bursty data sources need more dynamic controls. Burst level resource allocation is one such dynamic control. Potential benefits and other issues for burst level resource parameter negotiations for bursty data traffic over high speed wide area packet networks have been discussed earlier.^1–6 A detailed analysis of an adaptive buffer/window negotiation scheme for long file transfers using these concepts is presented in Reference 1. In this paper we discuss two burst level buffer/window negotiation schemes for short intermittent file transfers, focusing on the specific needs of such traffic streams. We develop closed network of queues models to reflect the behaviour of the proposed schemes. These models, while being simple, capture essential details of the control schemes. Under fairly general assumptions, the resulting network of queues is of product form and can be analysed using the mean value analysis. We use such an analysis to compare the proposed schemes and to determine appropriate sizes of trunk buffers to achieve the desired balance between bandwidth utilization and file transfer delay. The effects of other parameters on the performance of these schemes as well as on the buffer sizing rules are also discussed. Burst level (in-call) parameter negotiation may be carried out by the end system with the network elements or by an interface system (access controller) with the broadband network elements. We discuss implications of this location as well as the needed protocol features. Finally, the service discrimination capabilities desired at the trunk controllers in switching nodes are briefly discussed.     

Correction to the Fukuda-Kawata Young's modulus theory and the Fukuda-Chou strength theory for short fibre-reinforced composite materials

The theories for modulus and strength of short fibre-reinforced composite materials are based on the calculation of the force sustained by fibres crossing an arbitrary line perpendicular to the applied load, called the scan line, in a thin, rectangular specimen. The widely referenced Fukuda-Kawata modulus theory and the Fukuda-Chou strength theory are based on an apparently incorrect procedure for the calculation of the force sustained by the fibres crossing the scan line. The error is explained in detail by comparing the Fukuda-Kawata modulus theory and the Cox modulus theory. The magnitude of this error is calculated for specific cases.     

Oxide scale stresses in polycrystalline Ni200

An X-ray diffraction (sin² ψ) method has been successfully used to measure the oxidation stresses at room temperature in annealed and electropolished samples of polycrystalline Ni200 coupons oxidized in the temperature range 760 to 982° C for 4 h. The stresses on the free surface of the oxide (σ ₁₁ andσ ²²) were compressive and the average stress through the thickness normal to the oxide layer was found to be tensile. Surface stresses on the oxides formed at temperatures up to 927° C were found to be isotropic and both surface stresses and the average normal stress increased with increasing temperature of oxidation. At 982° C, the surface stresses were lower and this was attributed to the deformation and fracture of oxide layer resulting in stress relaxation.     

Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid

The redox behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce³⁺ mediators commonly used in indirect oxidation of organic compounds were evaluated in methane sulfonic acid on a glassy carbon working electrode employing cyclic voltammetry. Manganic methanesulfonate exhibits higher instability in dilute methanesulfonic acid. The solid MnO₂ formed during disproportionation on the glassy carbon electrode further affects the reproducibility. Cobaltic methanesulfonate formation occurs only at oxygen evolution region rendering the overall oxidation process less efficient. Ceric methane sulfonate formation is highly efficient over a wide acid concentration range. Ceric methanesulfonate can also be employed over a wide temperature range to oxidize different aromatic compounds.     

VOID FRACTION PROFILES IN PLANE-POISEUILLE FLOW OF VISCOELASTIC FOAMS

This investigation focuses on slow, isothermal, two-phase flow of gas bubble suspensions in Separan solutions, prepared with the help of a sodium borohydride blowing agent at room temperature. The total residence time in these experiments is much smaller than characteristic times for growth or rise of bubbles. The variation of bubble volume fraction across a narrow gap between two planes, is recorded at two locations along the flow direction. This is done with a Cesium gamma-radiation source focused on a region of area.012 cm² in the flow plane, and a Sodium iodide detector across the channel yielding a resolution of.01 over the range of void fractions investigated from.02 to.08. This measurement allows us to identify conditions under which the two-phase flow may be described by a two fluid model with a uniform bubbly core and a bubble free wall layer. With this two phase flow structure, a relative viscosity equation for the suspension is used to compute an apparent viscosity. Such calculations indicate that the observed reduction in apparent viscosity for the two phase flow may be attributed to a bubbly core which is more shear thinning than the medium. The additional shear thinning factor for the suspension is related to the elasticity of the medium.     

Effect of alkali on filaments of poly(ethylene terephthalate) and its copolyesters

The alkali hydrolysis of poly(ethylene terephthalate), anionic copolymer of poly(ethylene terephthalate), and block copolymer of poly(ethylene terephthalate)–poly(ethylene glycol) is investigated under a variety of conditions of alkali concentration in aqueous bath, additives, time, and temperature. Measurements of loss in weight, linear density, breaking load, tenacity, elongation to break apart from intrinsic viscosity, fiber density, COOH-end group content, diameter of filaments, and scanning electron micrographs have been analyzed to identify the differences in the action of alkali on these polymer materials.     

Optimal production of intermediate for zero—first and first—first order reaction sequences in fluidised bed reactors1

An analysis of zero—first and first—first order reaction schemes has been carried out in a fluidised bed with a view to optimising the production of intermediate R for a given bubble diameter. For the zero—first order reaction sequence, the gas residence time at which the maximum concentration of R occurs is shown to be fixed and independent of bubble size in the bed. On the other hand, for a first—first order reaction scheme, an optimum gas residence time exists for the concentration maximum to occur at the bed exit. This interaction between bubble diameter, gas residence time and maximum concentration of intermediate is resolved by recourse to a three dimensional diagram which optimises the production of intermediate for any given value of bubble diameter or gas residence time.     

An investigation of phase transformation behavior in sputter-deposited PtMn thin films

Sputter-deposited, equiatomic PtMn thin films have application in giant magnetoresistive spin valves, tunneling magnetoresistive spin valves, and magnetic random access memory. However, the as-deposited films are found to be a disordered A1 phase in a paramagnetic state rather than an antiferromagnetic phase with L1₀ structure, which is needed for device operation. Therefore, a postannealing step is required to induce the phase transformation from the asdeposited A1 face-centered-cubic phase to the antiferromagnetic L1₀ phase. The A1 to L1₀ metastable transformation was studied by x-ray diffraction and differential-scanning calorimetry. An exothermic transformation enthalpy of −12.1 kJ/mol of atoms was determined. The transformation kinetics were simulated using the Johnson-Mehl-Avrami analysis.     

Mixing matrix estimation using discriminative clustering for blind source separation

Mixing matrix estimation in instantaneous blind source separation (BSS) can be performed by exploiting the sparsity and disjoint orthogonality of source signals. As a result, approaches for estimating the unknown mixing process typically employ clustering algorithms on the mixtures in a parametric domain, where the signals can be sparsely represented. In this paper, we propose two algorithms to perform discriminative clustering of the mixture signals for estimating the mixing matrix. For the case of overdetermined BSS, we develop an algorithm to perform linear discriminant analysis based on similarity measures and combine it with K-hyperline clustering. Furthermore, we propose to perform discriminative clustering in a high-dimensional feature space obtained by an implicit mapping, using the kernel trick, for the case of underdetermined source separation. Using simulations on synthetic data, we demonstrate the improvements in mixing matrix estimation performance obtained using the proposed algorithms in comparison to other clustering methods. Finally we perform mixing matrix estimation from speech mixtures, by clustering single source points in the time-frequency domain, and show that the proposed algorithms achieve higher signal to interference ratio when compared to other baseline algorithms.