Zein-based anti-browning cling wraps for fresh-cut apple slices

The usage of cling wraps is emerging as an easy and cost-effective approach to protect fresh-cut fruits and vegetables from dust, whilst improving visual appeal on retail counters. This study focused on developing an alternate, protein-based packaging material as a food grade cling wrap for food packaging applications. Zein-based cling wraps were produced, and their physical and mechanical characteristics were evaluated and compared with conventionally used chitosan biopolymer films and commercial synthetic polymer films. Antioxidant potential of the prepared films was studied, and the effectiveness of the developed films as anti-browning cling wraps was evaluated using studies conducted on fresh-cut apple slices at ambient conditions. Anti-browning effects were in par with polymeric counterparts; however, zein cling wraps could better prevent weight loss in apple slices. Zein-based films can be adopted as biodegradable food grade cling wraps as an alternative to chitosan and synthetic polymeric materials.     

Electrical Insulation Characteristics of Silicone and EPDM Polymeric Blends. I

The typical parts of a polymeric insulator are core, metal end fittings and polymeric housing material. The housing is intended to protect the fibre glass rod from the environment and electrical surface discharges. Since the housing materials are made of organic polymeric material, its insulation characteristics need to be studied. Amongst the many different polymers available, this work focuses on silicone rubber and ethylene propylene diene monomer (EPDM). Blends of EPDM and silicone rubber are prepared in a two roll mixing mill. Dicumyl peroxide is used as vulcanizing agent. The blends consisting of various proportions of component polymers are prepared, compression moulded into sheets, and post cured. The blends are tested for their insulation characteristics as per IEC and ASTM standards. Volume and surface resistivity, dielectric strength, dielectric constant, tan delta, tracking resistance, arc resistance, comparative tracking index, tensile strength, and percentage elongation at break of the blends are studied and discussed. The test results show that the increasing proportion of silicone enhances the electrical insulation properties whereas increasing weight percentage of EPDM improves the mechanical strength of the blends.     

Product mix determination in the presence of alternate process plans and stochastic demand

The product mix problem in the presence of alternate process plans under uncertain demand is formulated as a non-linear programming model. A heuristic solution procedure based on lagrangean relaxation technique is also presented.     

APPLICATION OF RESPONSE SURFACE METHODOLOGY FOR THE MAXIMIZATION OF CONCORA CRUSH RESISTANCE OF PAPERBOARD

Response surface methodology is often used by researchers in different fields to determine the optimum values for controlled variables to maximize or minimize the response variables. Either maximization or minimization might be necessary depending on the response property. For example, if the response variable represents the yield of a process, maximization could be necessary; on the other hand, if the response variable is the biological oxygen demand (BOD) of an effluent the aim would definitely be minimization

Response surface methodology can be used two ways. It can be applied to the full-scale production or it can be scaled to a laboratory or the pilot plant. When applied to the full-scale production, the method is known as evolutionary operation (EVOP). EVOP is the continuous optimization of a process. The optimum conditions in a production plant can change depending on many factors such as raw material, ambient temperature, and equipment wear. Therefore, controlled variables should be optimized continuously to keep the response variable as close as possible to the maximum or minimum value. Hence, controlled variables are systematically changed around a center point to depict any shift of the response variable from the extreme. A thorough discussion of EVOP is given by Box, Evolutionary Operation: A Method for Increasing Industrial Productivity, Appl. Statist., 6, 81-101 (1957).     

Dyes from the leaves of deciduous plants with a high tannin content for wool

The aqueous leaf extracts of five different deciduous plants, namely, silver oak, flame of the forest, tanner’s senna, wattle and serviceberry, were used on their own and in combination with aluminium sulphate, stannous chloride and ferrous sulphate to dye wool by a simultaneous mordanting technique. The washing and light fastness properties of the developed shades were moderate to good. Based on the CIE 2000 spectral colour coordinate values (K/S, ΔL, Δa, Δb and ΔE), the developed shades were classified into four groups: yellow/brown, yellow, orange and dark grey. The use of aluminium sulphate gave medium shades (K/S = 8.24), while the stannous chloride and ferrous sulphate mordants provided deep shades (K/S = 30.5). Statistical analyses have shown that only the type of mordant and not the dye source significantly influenced the development of colour on wool. Hence, it was theoretically possible to use five selected leaves as a single mixture to produce four different colours on wool.     

Boundary-layer flow of the power-law fluid over a moving wedge: a linear stability analysis

We study the stability of the two-dimensional boundary-layer flow of a power-law (Ostwald de Waele) non-Newtonian fluid over a moving wedge. The mainstream velocity is assumed to have a power of distance from the leading boundary layer, such that the system admits to the self-similar solutions. We discuss the problem in question for both shear-thickening and shear-thinning fluids which lead to a non-uniqueness (double solutions) in the base flow solutions. We then address an issue of the stability of the non-unique solutions. A linear eigenvalue analysis of the double solution reveals that the basic flow represented by the first solution is always stable, and this flow is practically encountered. The system becomes unstable to the second solutions which have the mode-two perturbations with larger boundary-layer thickness. The first and second solutions form a tongue-like structure in the solution space. Furthermore, the modification of the viscosity for the power-law fluids reveals that the system predicts an infinite viscosity in the confinement of the boundary-layer region. Extensive comparisons of the solutions with the existing models with Newtonian fluid are made, and a physical explanation behind these solutions is proposed.

     

Soil–conduit interaction: an artificial intelligence application for reinforced concrete and corrugated steel conduits

Neural Computing and Applications - Marston’s load theory is commonly used for understanding the soil–conduit interaction. However, there are no practical methods available which can...     

Ubiquitin-Specific Protease 29 Regulates Cdc25A-Mediated Tumorigenesis

Cell division cycle 25A (Cdc25A) is a dual-specificity phosphatase that is overexpressed in several cancer cells and promotes tumorigenesis. In normal cells, Cdc25A expression is regulated tightly, but the changes in expression patterns in cancer cells that lead to tumorigenesis are unknown. In this study, we showed that ubiquitin-specific protease 29 (USP29) stabilized Cdc25A protein expression in cancer cell lines by protecting it from ubiquitin-mediated proteasomal degradation. The presence of USP29 effectively blocked polyubiquitination of Cdc25A and extended its half-life. CRISPR-Cas9-mediated knockdown of USP29 in HeLa cells resulted in cell cycle arrest at the G0/G1 phase. We also showed that USP29 knockdown hampered Cdc25A-mediated cell proliferation, migration, and invasion of cancer cells in vitro. Moreover, NSG nude mice transplanted with USP29-depleted cells significantly reduced the size of the tumors, whereas the reconstitution of Cdc25A in USP29-depleted cells significantly increased the tumor size. Altogether, our results implied that USP29 promoted cell cycle progression and oncogenic transformation by regulating protein turnover of Cdc25A.     

Scanning Auger electron spectroscopy study of the oxide film formed on dendritic and interdendritic regions of C containing Fe3Al intermetallic

The oxide films formed during early stage of oxidation at 800 °C on dendritic and interdendritic regions of the cast Fe–16Al–1C (wt.%) alloy were studied using scanning Auger electron spectroscopy. Microhardness measurement and elemental depth profiles by Auger spectroscopy reveal that the carbide, Fe₃AlC_0.69, is the major constituent of the interdendritic region, while dendrites are predominantly Fe₃Al phase. Between the two, the interdendritic region is found to be more prone to oxidation than the dendritic region, which was attributed to presence of carbides with low-Al content. In spite of the difference in oxide film thickness exhibited by both the phases, they consist of an inner aluminium oxide layer and an outer iron oxide layer.