Testing interconnections to static RAMs

A method for testing the interconnections of ordinary static RAMs with a processor that has a boundary-scan register and an IEEE 1149.1 test-access port is described. The method uses an enhanced boundary-scan-register design that manipulates the test-access-port controller states to meet the static RAM's timing constraints. The implementation is more economical than a boundary-scan register that strictly conforms to IEEE 1149.1. Test operation is more efficient, requiring a third of the number of scan operations. A test-pattern set and a method for detecting and diagnosing the interconnection faults on RAMs are also described. The test-pattern set can be enhanced as necessary to increase coverage and diagnosing ability and to handle any RAM configuration. The implementation of the proposed boundary-scan register is independent of the test algorithm used. It is believed that the methodology is extendable to RAMs that use an access protocol different from the one described, for example dynamic RAMs and synchronous RAMs     

Range map superresolution-inpainting,and reconstruction from sparse data

Range images often suffer from issues such as low resolution (LR) (for low-cost scanners) and presence of missing regions due to poor reflectivity, and occlusions. Another common problem (with high quality scanners) is that of long acquisition times. In this work, we propose two approaches to counter these shortcomings. Our first proposal which addresses the issues of low resolution as well as missing regions, is an integrated super-resolution (SR) and inpainting approach. We use multiple relatively-shifted LR range images, where the motion between the LR images serves as a cue for super-resolution. Our imaging model also accounts for missing regions to enable inpainting. Our framework models the high resolution (HR) range as a Markov random field (MRF), and uses inhomogeneous MRF priors to constrain the solution differently for inpainting and super-resolution. Our super-resolved and inpainted outputs show significant improvements over their LR/interpolated counterparts. Our second proposal addresses the issue of long acquisition times by facilitating reconstruction of range data from very sparse measurements. Our technique exploits a cue from segmentation of an optical image of the same scene, which constrains pixels in the same color segment to have similar range values. Our approach is able to reconstruct range images with as little as 10% data. We also study the performance of both the proposed approaches in a noisy scenario as well as in the presence of alignment errors.     

Synchronizing the IEEE 1149.1 test access port for chip leveltestability

IEEE STD 1149.9 is a widely accepted testability standard in the industry. Although its mandatory provisions focus narrowly on board level assembly verification testing, primarily via the boundary-scan register, its test access port (TAP) and many optional provisions make the standard usable for a much broader range of applications. Since its inception, numerous extensions and applications have been proposed that allow the standard's TAP to be used at the system level for general system-level test and maintenance tasks and at the chip level for accessing chip-level testability features. Chip-level applications thus far have used the port for accessing the chip's scan design or for simple triggering of on-chip built-in self-test features via the RUNBIST instruction. Applications requiring general access to chipwide testability features that operate at the full chip-clock rate have been rare, primarily because of one of the standard's basic tenets-namely, its dedicated test clock. This strategy enhances the test port to let it operate with two clocks. One is used while accessing IEEE 1149.1-compliant features, the other while accessing chip manufacturing test features     

Assessment of fish mercury levels in the upper St. Lawrence River,Canada

The stretch of the St. Lawrence River near Cornwall, Ontario, Canada, between the Moses–Saunders power dam to the eastern outlet of Lake St. Francis in Québec, is currently listed as an Area of Concern (AOC), and has restrictive fish consumption advisories in place, largely due to high mercury levels. This study examined long-term temporal trends of mercury concentrations in northern pike, smallmouth bass, walleye and yellow perch from the St. Lawrence River, including the Cornwall AOC. In addition, differences in fish mercury concentrations among river sections were compared for each species using historical (1975–1979) and recent (2000–2011) data. Statistically significant declines in mercury concentrations were observed in all river sections for yellow perch (~ 40%), as well as in northern pike and walleye in at least one river section. For the river section encompassing the AOC, recent mercury concentrations are 33–59% lower than historical mercury concentrations for all four species. Further, a comparison of recent mercury concentrations between the AOC river section and other Ontario lakes/rivers suggests that AOC mercury values are within the 75th percentile of values for other Ontario water bodies in three of the four species considered. However, current fish mercury values for the AOC river section remain higher than one or more upstream river sections. These results indicate that recovery is still ongoing in this AOC.     

Estimation of the Kubelka—Munk scattering coefficient from single particle scattering parameters

Computer colour matching of paints is based on the determination of the Kubelka—Munk absorption (K) and scattering coefficients (S) of pigments. K and S are sensitive to particle size in the range of sizes employed in paint technology. The K—M theory does not provide any guidelines for the correction of the values of K and S with a change in particle size. On the other hand the Mie theory linear scattering coefficient can be calculated from a knowledge of size and refractive index of the pigment. A number of relations correlating the K—M scattering coefficient and the linear scattering coefficient have been proposed in the literature. Attempts are made to estimate the K—M scattering coefficient using a relation suggested by Mudgett and Richards and to make a comparison with experimental values. The Mie theory equations being complex, simplified equations applicable to pigment sizes for the calculation of Mie theory parameters are proposed. The viability of the simplified equations has been established by comparing the results with those obtained using the full Mie equations.The K—M scattering coefficient for titanium dioxide pigments has been determined from reflectance measurements. The particle size of titanium dioxide has been determined by a light scattering method. The K—M scattering coefficient calculated from the linear scattering coefficient obtained using the simplified expressions agrees with experimental results. This suggests a method for the correction of the values of K and S with changes in pigment particle size.     

Pebble bed-oil thermal energy storage for solar thermo-electric power systems

Results of a study to examine the operating characteristics of a 100 kWh thermal energy storage (TES) system suitable for solar thermo electric applications is described. The system chosen consisted of a pebble bed as the primary storage medium and oil as the heat transfer cum storage medium. The operating temperatures considered were between 230 and 250°C with a 20 deg C swing. A full-size unit consisting of a steel tank of volume 10 m³ with 50 mm pebbles, suitable instrumentation and facility for heating the oil was built. The important operating variables and characteristics of the system studied included the transient behaviour of the bed, namely the thermal wave front characteristics. Results of the theoretical analysis of the transient bed behaviour were compared with the experimental data on the wave front propogation characteristics and the comparisons are discussed. The uniformity of flow distribution is also examined.     

Machinability study of high speed steel for focused ion beam (FIB) milling process – An experimental investigation at micron/nano scale

Nowadays the attention is focused on machining of non-silicon materials for miniaturized devices. High speed steel (HSS) is a non-silicon tool material, which is used in metal cutting applications as well as in micro-medical applications. Focused ion beam (FIB) milling process is highly suited for the fabrication of micro tools and other micro devices manufactured from HSS material. This study investigates the machinability aspects of HSS for FIB milling process. Beam current, extraction voltage, angle of incidence, dwell time and percentage overlap between beam diameters are the FIB process parameters, which have been analyzed experimentally to optimize FIB milling process for maximum material removal rate and minimum surface roughness. Beam current is found as the most significant parameter for controlling the material removal rate and surface roughness.     

Optical properties of lead iodide between 0.4946 and 6.185 eV

The optical and dielectric constants of PbI₂ thin films have been determined from transmittance and reflectance measurements, for photon energies between 0.4946 and 6.185 eV. The absorption coefficient, bandgap energy, and dielectric constants were determined at room temperature by the normal incidence method. The first three lines of the hydrogenic exciton series associated with the absorption edge are well resolved in reflectivity measurements. The transmittance measurements enable the evaluation of the value of bandgap energy E_g. The bandgap energy of PbI₂ at room temperature was found to be 2.55 eV. A careful analysis of the absorption coefficients indicated the crystalline character of the sample studied; a similar diagnosis was obtained from X-ray evidence. SEM analysis revealed that as the thickness of the films increases the material becomes amorphous.     

Intraorbital air simulating an intraocular foreign body

PURPOSE: To present an ultrasonographic finding that simulated an intraocular foreign body after repair of a ruptured globe. METHOD: Case report. An ultrasonogram of a post-trauma eye was correlated with a computed tomographic scan. RESULTS: B-scan ultrasonography was performed on an eye after repair of a corneoscleral laceration. The ultrasonogram showed a highly reflective echo source suggestive of a foreign body; however, an orbital computed tomographic scan demonstrated that the lesion was intraorbital air. CONCLUSION: Although a highly reflective echo source in the presence of a ruptured globe may suggest a foreign body, the presence of orbital air should also be considered when interpreting ultrasonograms used in the preoperative and postoperative management of globe trauma.     

Traversed geometric fractals

Two basic components are required for generating a geometric fractal: an initiator and a generator. Multiple traversal strategies for both initiator and generator segments are proposed. It is shown how to generate many fractal images by changing the traversal strategies for the given initiator and/or generator. These fractals are referred to as traversed geometric fractals. A notation for representing and identifying segments of the initiator and the generator is presented. This notation is essential in producing traversed geometric fractals and deriving their properties. The generators are classified into various categories useful in analyzing the generated fractals' visual features