Hot-carrier reliability of 20V MOS transistors in 0.13 μm CMOS technology

This paper presents results of reliability investigation of 20 V N-Drift MOS transistor in 0.13 μm CMOS technology. Due to high performances required for CMOS applications, adding high voltage devices becomes a big challenge to guarantee the reliability criteria. In this context, new reliability approaches are needed. Safe Operating Area are defined for switch, V_ds limited and V_gs limited applications in order to improve circuit designs. For V_ds limited applications, deep doping dose effects in drift area are investigated in correlation to lifetime evaluations based on device parameter shifts under hot carrier stressing. To further determine the amount and locations of hot carriers injections, accurate 2D technological and electrical simulations are performed and permit to select the best compromise between performance and reliability for N-Drift MOS transistor.     

Laparoscopic cholecystectomy and gallbladder cancer: a diagnostic and therapeutic dilemma

The correct treatment strategy of patients with unsuspected gallbladder cancer undergoing laparoscopy, and the prevention of delayed diagnosis are current issues. We report a case of late diagnosis with umbilical metastasis and poor survival. A policy of careful inspection of the gallbladder and a cautious strategy in the case of gross alteration of its external morphology seems advisable during laparoscopic cholecystectomy. Although no agreement exists concerning the best treatment in the event of delayed diagnosis, the adopted strategy is contingent on patient status, disease stage and the possibility of performing appropriate follow-up.     

Ultrafast Spectroscopy of La2−x Sr x CuO4 Single Crystals

We present measurements of the ultrafast optical response of La_2–x Sr _x CuO₄ single crystals at two different doping levels (x=0.15, 0.07) as a function of temperature. Owing to the 40-fs time resolution of our experiment, we are able to measure both the build-up and the decay of the ultrafast signal. We show for the first time that the temperature dependence of the transient reflectance amplitude tracks the thermal depletion of the superfluid density. At low temperature we identify a new regime characterized by an extremely long, temperature-dependent rise-time (3 ps). The doping dependence of the relaxation rate suggests that this is sensitive to the scattering of quasiparticles by low-energy spin excitations.     

Developing wearable bio-feedback systems: a general-purpose platform

Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.     

Stem cell factor enhances the adhesion of AML cells to fibronectin and augments fibronectin-mediated anti-apoptotic and proliferative signals

Acute myeloid leukaemia (AML) cells express the SCF receptor c-kit (CD117) on their cell surface and demonstrate enhanced adhesion to fibronectin (FN) following exposure to stem cell factor (SCF). Increased adhesion occurs within 5 min, is dose dependent, and persists beyond 2 h. Baseline and enhanced adhesion occur through the surface FN receptor very late antigen-5 (VLA-5, CD49e/CD29) which is expressed by AML cells. Unstimulated AML cells exposed to FN undergo less apoptosis than controls (inhibition 22.5 +/- 7.0%, P = 0.02, n = 8). Exposure to SCF alone without FN also inhibits AML cell apoptosis (by 19.0 +/- 7.7% compared to controls, P = 0.06, n = 8). Simultaneous exposure to SCF and FN increases the inhibition of AML cell apoptosis to 37.8 +/- 7.9% (P = 0.005 compared to control, P = 0.04 compared to FN alone, P = 0.06 compared to SCF alone) demonstrating that SCF not only enhances the propensity of AML cells to adhere to FN, but also results in an additive survival benefit following FN contact. Some but not all the reduction in apoptosis is mediated through VLA-5. The combination of SCF and FN also affects proliferation, resulting in a synergistic enhancement of AML cell proliferation in half the cases studied. When normal CD34+ human haemopoietic progenitors were studied, FN had little effect on their apoptosis and failed to enhance the anti-apoptotic effect of SCF. It did, however, synergise with SCF in promoting CD34+ cell proliferation. Exposure of AML cells to SCF and FN, both of which can be found in high concentration in the bone marrow stroma, inhibits apoptosis. Cytokines and extracellular matrix proteins augment each others' effects since SCF enhances adhesion to fibronectin, which in turn augments the survival signal delivered by the cytokine alone. Cytokine and adhesion receptors can combine to affect cell characteristics including proliferation and survival.     

Connexin 43 and Connexin 26 Involvement in the Ponatinib-Induced Cardiomyopathy: Sex-Related Differences in a Murine Model

Cardiac connexins (Cxs) are proteins responsible for proper heart function. They form gap junctions that mediate electrical and chemical signalling throughout the cardiac system, and thus enable a synchronized contraction. Connexins can also individually participate in many signal transduction pathways, interacting with intracellular proteins at various cellular compartments. Altered connexin expression and localization have been described in diseased myocardium and the aim of this study is to assess the involvement of Cx43, Cx26, and some related molecules in ponatinib-induced cardiac toxicity. Ponatinib is a new multi-tyrosine kinase inhibitor that has been successfully used against human malignancies, but its cardiotoxicity remains worrisome. Therefore, understanding its signaling mechanism is important to adopt potential anti cardiac damage strategies. Our experiments were performed on hearts from male and female mice treated with ponatinib and with ponatinib plus siRNA-Notch1 by using immunofluorescence, Western blotting, and proteomic analyses. The altered cardiac function and the change in Cxs expression observed in mice after ponatinib treatment, were results dependent on the Notch1 pathway and sex. Females showed a lower susceptibility to ponatinib than males. The downmodulation of cardiac Cx43, Cx26 and miR-122, high pS368-Cx43 phosphorylation, cell viability and survival activation could represent some of the female adaptative/compensatory reactions to ponatinib cardiotoxicity.     

Properties of bioriented nylon 6 films related to film production technology

Four production steps, extrusion, blowing, stabilization, and finishing, are involved in the manufacture of biorented nylon 6 films. The films obtained after each step were studied by wide‐angle diffraction X‐rays, IR analysis, and density measurements. Orientation in the amorphous phase was evaluated by thermal retraction. Free volume was investigated by positron annihilation spectroscopy. Mechanical properties were tested by tensile tests, and permeability was tested with isopiestic permeameters. Quenching, after extrusion, generated an unstable γ crystalline phase and an amorphous phase. Blowing transformed the unstable γ phase into the thermodynamically stable α phase and increased the chain orientation; stabilization increased α phase crystals, favored hydrogen bond formation and, therefore, the mechanical properties, leaving unchanged the chain orientation; the final treatment increased the mechanical properties. The film permeabilities to O₂, N₂, and CO₂ were practically unchanged after each production step; this result may be explained by considering that the nanoholes, present in the films and responsible for the diffusion inside the polymer, maintained practically constant their radius, whereas their number concentration decreased slowly after thermomechanical treatments. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 559–571, 2002     

An analysis method for atomistic abrasion simulations featuring rough surfaces and multiple abrasive particles

We present a molecular dynamics (MD) model system to quantitatively study nanoscopic wear of rough surfaces under two-body and three-body contact conditions with multiple abrasive particles. We describe how to generate a surface with a pseudo-random Gaussian topography which is periodically replicable, and we discuss the constraints on the abrasive particles that lead to certain wear conditions. We propose a post-processing scheme which, based on advection velocity, dynamically identifies the atoms in the simulation as either part of a wear particle, the substrate, or the sheared zone in-between. This scheme is then justified from a crystallographic order point of view. We apply a distance-based contact zone identification scheme and outline a clustering algorithm which can associate each contact atom with the abrasive particle causing the respective contact zone. Finally, we show how the knowledge of each atom’s zone affiliation and a time-resolved evaluation of the substrate topography leads to a break-down of the asperity volume reduction into its components: the pit fill-up volume, the individual wear particles, the shear zone, and the sub-surface substrate compression. As an example, we analyze the time and pressure dependence of the wear volume contributions for two-body and three-body wear processes of a rough iron surface with rigid spherical and cubic abrasive particles.     

Experimental methods in chemical engineering: X‐ray photoelectron spectroscopy‐XPS

X‐ray photoelectron spectroscopy (XPS) is a quantitative surface analysis technique used to identify the elemental composition, empirical formula, chemical state, and electronic state of an element. The kinetic energy of the electrons escaping from the material surface irradiated by an x‐ray beam produces a spectrum. XPS identifies chemical species and quantifies their content and the interactions between surface species. It is minimally destructive and is sensitive to a depth between 1–10nm. The elemental sensitivity is in the order of 0.1 atomic %. It requires ultra high vacuum ( Pa) in the analysis chamber and measurement time varies from minutes to hours per sample depending on the analyte. XPS dates back 50 years ago. New spectrometers, detectors, and variable size photon beams, reduce analysis time and increase spatial resolution. An XPS bibliometric map of the 10 000 articles indexed by Web of Science^[1] identifies five research clusters: (i) nanoparticles, thin films, and surfaces; (ii) catalysis, oxidation, reduction, stability, and oxides; (iii) nanocomposites, graphene, graphite, and electro‐chemistry; (iv) photocatalysis, water, visible light, and ; and (v) adsorption, aqueous solutions, and waste water.