Study of hydrogen physisorption on nanoporous carbon materials of different origin

Hydrogen adsorption capabilities of different nanoporous carbon, i.e. amorphous carbons obtained by chemical activation (with KOH) of a sucrose-derived char previously ground by ball milling and carbon replicas of NH₄-Y and mesocellular silica foam (MSU-F) inorganic templates, were measured and correlated to their porous properties. The porous texture of the prepared carbon materials was studied by means of N₂ and CO₂ adsorption isotherms measured at −196 °C and 0 °C, respectively. Comparison with nanoporous carbons obtained without pre-grinding the sucrose-derived char [12] shows that the ball milling procedure favours the formation of highly microporous carbon materials even at low KOH loadings, having a beneficial effect of the interaction between the char particles and the activating agent. Hydrogen adsorption isotherms at −196 °C were measured in the 0.0-1.1 MPa pressure range, and a maximum hydrogen adsorption capacity of 3.4 wt.% was obtained for the amorphous carbon prepared by activation at 900 °C with a KOH/char weight ratio of 2. Finally, a linear dependence was found between the maximum hydrogen uptake at 1.1 MPa and the samples microporous volume, confirming previous results obtained at −196 °C and sub-atmospheric pressure [12].     

Numerical modelling of interfacial soil erosion with viscous incompressible flows

The aim of this study is to develop a numerical model for simulating surface erosion occurring at a fluid/soil interface subject to a flow process. Balance equations with jump relations are used. A penalization procedure including a fictitious domain method is used to compute the Stokes flow around obstacles, in order to avoid body-fitted unstructured meshes and instead use fast and efficient finite volume approximations on Cartesian meshes. The evolution of the water/soil interface is described by using a level set function. The ability of the model to predict the interfacial erosion of soils is confirmed by several numerical simulations.     

Iterative solutions for implicit Time Discontinuous Galerkin methods applied to non-linear elastodynamics

 Time Discontinuous Galerkin methods require the factorization of a matrix larger than that exploited in standard implicit schemes. Therefore, they lend themselves to implementations based on predictor-multicorrector solution algorithms. In this paper, various convergent and computationally efficient iterative methods implemented in the unknown displacements for determining the solution of non linear systems are proposed. The iterative solutions presented here differ from those implemented in the unknown velocities in that they are computationally superior. The results of numerical simulations relevant to Duffing oscillators and to a stiff spring pendulum discretized with finite elements which are designed to evaluate the efficacy of these iterative methods with non-linear systems, show a low-computational expense when compared to earlier iterative schemes. Received: 27 May 2002 / Accepted: 28 January 2003 The financial support from the Italian Ministry for Education, Universities and Research (MIUR) is acknowledged. However, opinions expressed in this paper are those of the writers, and do not necessarily reflect the views of the sponsoring agency.     

Various personality traits of patients with psoriatic arthropathy

It is well known that patients affected by rheumatic diseases may present specific pathological trends in personality structure, as has been extensively reported in literature. Our study was aimed at investigating several aspects of the personality traits of 20 patients with psoriatic arthropathy, compared with a group of 20 patients with rheumatoid arthritis. All patients were evaluated with appropriate rating scales assigned in auto and hetero-administration. The study results points to a personality trait disturbance in psoriatic arthritis patients, which can be clearly differentiated from the anxious habitus and/or reactive-depressive state observed in patients with rheumatoid arthritis.     

A state observer for the Virgo inverted pendulum

We report an application of Kalman filtering to the inverted pendulum (IP) of the Virgo gravitational wave interferometer. Using subspace method system identification techniques, we calculated a linear mechanical model of Virgo IP from experimental transfer functions. We then developed a Kalman filter, based on the obtained state space representation, that estimates from open loop time domain data, the state variables of the system. This allows the observation (and eventually control) of every resonance mode of the IP mechanical structure independently.     

Survey of the interventional cardiology procedures in Italy

Interventional cardiology procedures are increasing because they offer many advantages to patients compared with other techniques: therefore the Italian National Institution for Insurance against Accidents at Work decided to start a survey for monitoring the state-of-the-art regarding the professionals involved in those procedures. The survey covered six cardiology and medical physics Italian departments. Each centre was asked to record 10 examinations for five types of procedures: coronary angiography (CA), electrophysiology studies (ES), pacemaker implantation (PI), percutaneous transluminal coronary angioplasty (PTCA) and radiofrequency catheter ablation (RA). For each examination all the centres were requested to fill in a questionnaire containing information regarding the operator performing the examination, the patient and the procedure. A total of 290 examinations were recorded: 103 CA, 14 ES, 68 PI, 79 PTCA and 26 RA. As occupational doses are strongly related to patient doses, both patients and operators radiation dose data are reported. Ratios of maximum to minimum mean patient doses across the hospitals surveyed were 2.0, 3.9, 7.0, 1.8 and 1.4 for CA, ES, PI, PTCA and RA, respectively. The calculated rounded mean dose-area product values across all participating hospitals were comparable with other values reported in the literature. In general, specific radiation protection tools were used by all operators performing different procedures in all hospitals. A major issue in this survey was the absence of information about correlation between staff and patient doses in a single procedure: future studies could be more aimed to prospective goals where occupational exposures per procedure are monitored specifically.     

Effect of mineral matter removal on pyrolysis of wood sawdust from an invasive species

Kinetics of the pyrolysis of wood sawdust from the invasive species Parkinsonia aculeata, untreated and demineralized by a mild acid treatment, is comparatively investigated in order to examine the effect of the removal of minerals naturally present in the biomass. Non-isothermal thermogravimetric analysis from room temperature up to 500°C is applied for this purpose. Demineralization shifts the process onset and the maximum degradation rate to higher temperatures, and leads to enhance the activation energy from 56 to 60 kJ mol^–1, pointing to a catalytic role of alkaline and alkaline earth metals in the biomass. Likewise, the three kinds of pyrolysis products (gas, bio-char, and bio-oil) are obtained from experiments performed in a bench-scale installation at 500°C. Yields and physicochemical characteristics of the pyrolysis products are determined. The pronounced reduction in the content of metals in the sawdust leads to increase bio-oil yield in around 10%, the specific surface area of the bio-char, from ≈ 2 to ≈ 74 m² g^–1, and the higher heating value of all the pyrolysis products.     

Post-synthesis modifications of SBA-15 carbon replicas: Improving hydrogen storage by increasing microporous volume

SBA-15 carbon replicas were synthesized with a sucrose solution as carbon source, carrying out carbonization at two different temperatures (800 and 1000 °C). Carbon pyrolised at 800 °C showed higher BET surface area and was chosen for further post-synthesis activation treatments (physical via CO₂ or chemical via KOH), with the aim of improving hydrogen adsorption capacity. For comparison, an amorphous carbon was also synthesized, by direct carbonization of the carbon source, without any inorganic template: on this material a chemical activation was also performed. H₂ adsorption isotherms at the temperature of liquid nitrogen and sub-atmospheric pressure were measured. A linear correlation was found between hydrogen uptake and microporous volume of the different carbons, rather than with BET specific surface area. Surprisingly, the sample prepared in the absence of inorganic template resulted the most effective one.     

Fast and efficient synthesis of high molecular weight poly(epsilon‐caprolactone) diols by microwave‐assisted polymer synthesis

Because of advantageous features such as shorter reaction times, greater yields, limited generation of by‐products and relatively easy and straightforward scale‐up, microwave‐assisted synthesis has become a very appealing tool in organic synthesis. Conversely, its implementation in the context of the synthesis of biomaterials for biopharmaceutical applications has been more limited. The present work reports on the fast and efficient microwave‐assisted synthesis of poly(ethylene glycol) (PEG)‐initiated poly(ε‐caprolactone) diols (PCL) by the ring‐opening polymerization (ROP) of ε‐caprolactone using stannous octanoate as catalyst. Since the PEG content in the synthesized copolymers was extremely low (0.2–1.9%), products were highly hydrophobic and displayed the intrinsic thermal properties of pure PCL. As opposed to the more time‐consuming conventional thermally‐driven synthesis that usually demands 2–3 h, the microwave technique resulted in intermediate to high molecular weight PEG‐PCL derivatives within 10–15 min. The influence of different parameters affecting the synthetic process, namely monomer‐to‐initiator ratio, reaction time, catalyst concentration and the presence, type, and concentration of solvent were thoroughly investigated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Quantitative Proteomics Reveals Changes Induced by TIMP-3 on Cell Membrane Composition and Novel Metalloprotease Substrates

Ectodomain shedding is a key mechanism of several biological processes, including cell-communication. Disintegrin and metalloproteinases (ADAMs), together with the membrane-type matrix metalloproteinases, play a pivotal role in shedding transmembrane proteins. Aberrant shedding is associated to several pathological conditions, including arthritis. Tissue inhibitor of metalloproteases 3 (TIMP-3), an endogenous inhibitor of ADAMs and matrix metalloproteases (MMPs), has been proven to be beneficial in such diseases. Thus, strategies to increase TIMP-3 bioavailability in the tissue have been sought for development of therapeutics. Nevertheless, high levels of TIMP-3 may lead to mechanism-based side-effects, as its overall effects on cell behavior are still unknown. In this study, we used a high-resolution mass-spectrometry-based workflow to analyze alterations induced by sustained expression of TIMP-3 in the cell surfaceome. In agreement with its multifunctional properties, TIMP-3 induced changes on the protein composition of the cell surface. We found that TIMP-3 had differential effects on metalloproteinase substrates, with several that accumulated in TIMP-3-overexpressing cells. In addition, our study identified potentially novel ADAM substrates, including ADAM15, whose levels at the cell surface are regulated by the inhibitor. In conclusion, our study reveals that high levels of TIMP-3 induce modifications in the cell surfaceome and identifies molecular pathways that can be deregulated via TIMP-3-based therapies.