Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/carbon fiber composites fabricated by material extrusion additive manufacturing

For the 3D printed composites, fiber alignment is affected by the direction of melt-flow during extrusion of filaments and subsequently through the printing nozzle. The resulting fibers orientation and the fiber-matrix compatibility have a direct correlation with mechanical properties. This study investigates the impact of processing conditions on the state of the carbon fiber types and their orientation on the mechanical properties of 3D-printed composites. Short and long carbon fibers were used as starting reinforcing materials, and the state of fibers at the beginning and on the printed parts were evaluated. Strong anisotropy in terms of mechanical properties (flexural and impact properties) was observed for the samples printed with different printing orientations. Interestingly, the number of voids in the printed composites was found to be correlated with the fiber types. The present work provides a step towards the optimization of tailored composite properties by additive manufacturing.     

Influence of the nanofiber dimensions on the properties of nanocellulose/poly(vinyl alcohol) aerogels

The investigation of aerogels made from cellulose nanofibers and poly(vinyl alcohol) (PVOH) as a polymeric binder is reported. Aerogels based on different nanocellulose types were studied to investigate the influence of the nanocellulose dimensions and their rigidity on the morphology and mechanical properties of the resulting aerogels. Thus, cellulose nanocrystals (CNCs) with low (10), medium (25), and high (80) aspect ratios, isolated from cotton, banana plants, and tunicates, respectively, microfibrillated cellulose (MFC) and microcrystalline cellulose (MCC) were dispersed in aqueous PVOH solutions and aerogels were prepared by freeze‐drying. In addition to the cellulose type, the PVOH‐ and the CNC‐concentration as well as the freeze‐drying conditions were varied, and the materials were optionally cross‐linked by an annealing step or the use of a chemical cross‐linker. The data reveal that at low PVOH content, rigid, high‐aspect ratio CNCs isolated from tunicates afford aerogels that show the least amount of shrinking upon freeze‐drying and display the best mechanical properties. However, with increasing concentration of PVOH or upon introduction of a chemical cross‐linker the differences between materials made from different nanocellulose types decrease. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41740.     

Melt processing of polyamide 12 and cellulose nanocrystals nanocomposites

The fabrication of nanocomposites of polyamide 12 (PA12) and cellulose nanocrystals (CNCs) isolated from cotton and tunicates is reported. Through a comparative study that involved solution‐cast (SC) and melt‐processed materials, it was shown that PA12/CNC nanocomposites can be prepared in a process that appears to be readily scalable to an industrial level. The results demonstrate that CNCs isolated from the biomass by phosphoric acid hydrolysis display both a sufficiently high thermal stability to permit melt processing with PA12, and a high compatibility with this polymer to allow the formation of nanocomposites in which the CNCs are well dispersed. Thus, PA12/CNC nanocomposites prepared by melt‐mixing the two components in a co‐rotating roller blade mixer and subsequent compression molding display mechanical properties that are comparable to those of SC reference materials. Young's modulus and maximum stress could be doubled in comparison to the neat PA12 by introduction of 10% (CNCs from tunicates) or 15% w/w (CNCs from cotton) CNCs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42752.     

Model-driven approach to enterprise interoperability at the technical service level

Enterprise Interoperability is the ability of enterprises to interoperate in order to achieve their business goals. Although the purpose of enterprise interoperability is determined at the business level, the use of technical (IT) services to support business services implies that interoperability solutions at both the business and technical level should be aligned. This paper introduces and demonstrates the suitability of an approach based on model transformations to automate enterprise interoperability. We start by considering that a set of enterprises are willing to interoperate in the context of their individual goals. The interactions necessary for their cooperation are then properly captured in terms of a so-called choreography. Our approach allows a choreography to be mapped and transformed to an orchestration, which defines the operation of the actual technical services of the interoperating enterprises. The paper discusses the technical challenges of implementing the transformation, and illustrates our approach with two application scenarios.     

An experimental study on the performance of a zinc air fuel cell with inexpensive metal oxide catalysts and porous organic polymer separators

A zinc air fuel cell (ZAFC) of taper-end structure was designed and manufactured with a polyamide-base engineering plastic. An air cathode with multiple layers of blended inexpensive metal oxides, MnO₂ and CeO₂, showed a remarkably stable electricity-generating performance even at high current density. A cheap thin Nylon filter was found as a potential candidate for the separator in ZAFC because of its high stability and durability in the alkali electrolyte and proper pore size.     

NLRP3 Inflammasome Activation Is Involved in LPA1-Mediated Brain Injury after Transient Focal Cerebral Ischemia

Lysophosphatidic acid receptor 1 (LPA₁) contributes to brain injury following transient focal cerebral ischemia. However, the mechanism remains unclear. Here, we investigated whether nucleotide-binding oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3) inflammasome activation might be an underlying mechanism involved in the pathogenesis of brain injury associated with LPA₁ following ischemic challenge with transient middle cerebral artery occlusion (tMCAO). Suppressing LPA₁ activity by its antagonist attenuated NLRP3 upregulation in the penumbra and ischemic core regions, particularly in ionized calcium-binding adapter molecule 1 (Iba1)-expressing cells like macrophages of mouse after tMCAO challenge. It also suppressed NLRP3 inflammasome activation, such as caspase-1 activation, interleukin 1β (IL-1β) maturation, and apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC) speck formation, in a post-ischemic brain. The role of LPA₁ in NLRP3 inflammasome activation was confirmed in vitro using lipopolysaccharide-primed bone marrow-derived macrophages, followed by LPA exposure. Suppressing LPA₁ activity by either pharmacological antagonism or genetic knockdown attenuated NLRP3 upregulation, caspase-1 activation, IL-1β maturation, and IL-1β secretion in these cells. Furthermore, nuclear factor-κB (NF-κB), extracellular signal-regulated kinase 1/2 (ERK1/2), and p38 were found to be LPA₁-dependent effector pathways in these cells. Collectively, results of the current study first demonstrate that LPA₁ could contribute to ischemic brain injury by activating NLRP3 inflammasome with underlying effector mechanisms.     

Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

The mechanical reinforcement of nanocomposites containing nanorods‐like fillers such as cellulose nanocrystals (CNCs) is often interpreted by adapting the classical parallel–series model, assuming a simple hyperbolic dependence between the percolation threshold and aspect ratio. However, such assumptions are valid only for nanorods with high aspect ratio and often are misinterpreting the reinforcement obtained at low volume fraction of filler loading. To elucidate this intriguing scenario, we proposed a new approach and validated it by compiling and reinterpreting some of available literature that represent the experimental reinforcement with CNCs. Our approach showed better accuracy, specifically for the cases of CNC nanorods with lower aspect ratio. We conclude that this route permits a more realistic evaluation of the mechanical reinforcement, where a physical parameter accounting the polymer filler association is introduced. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45254.     

The evaluation of a PCR-based method for identification of Salmonella enterica serotypes from environmental samples and various food matrices

The most commonly used method for serotyping Salmonella spp. is based on the Kaufmann–White scheme, and is composed of serological reactions using antibodies to LPS agglutinins. The multiplex PCR used in this investigation was established by Kim et al. to serotype the 30 most common clinical Salmonella serotypes, as determined by CDC. The PCR assay consists of two five-plex reactions and a single two-plex PCR reaction, based on six genetic loci from Salmonella enterica serotype Typhimurium and four loci from S. enterica serotype Typhi. In this investigation, we further evaluated the method for serotyping Salmonella spp. using a reference collection, environmental samples collected from a Mid-Atlantic region tomato farm study, four food matrices spiked with different Salmonella serotypes and a proficiency test. The PCR assay was first evaluated using DNA isolated from pure cultures of isolates obtained from various clinical and environmental samples, and then DNA isolated from broth cultures of food matrices of “Red round” and Roma tomatoes, Romaine lettuce, green onions and Serrano peppers spiked with serotypes Newport, Typhimurium, Javiana and Saintpaul, respectively. The results showed that the PCR assay correctly serotyped Salmonella spp. from the clinical, environmental, spiked food matrices, and proficiency test samples. These findings are significant because the PCR assay was successful in the identification of Salmonella in the spiked samples in a broth culture containing other non-salmonella organism. This method may be a useful resource for the food safety community.     

Effect of NiTe Nanoinclusions on Thermoelectric Properties of Bi2Te3

Metal nanoinclusions in bulk thermoelectric matrix create metal?Csemiconductor interfaces, which can result in improvement in the thermoelectric power factor due to low-energy electron filtering and a simultaneous reduction in lattice thermal conductivity due to increased phonon scattering at grain boundaries. The combined effect results in enhancement of the thermoelectric figure of merit. We report the effect of NiTe nanoinclusions in a Bi₂Te₃ matrix. The Bi₂Te₃/NiTe nanocomposite was synthesized by planetary ball milling. Different volume fractions of NiTe nanoinclusions were incorporated into the bulk (Bi₂Te₃) matrix and uniaxially hot pressed at 100?MPa and 500°C. The presence of nanoinclusions was confirmed by x-ray diffraction and transmission electron microscopy. The Seebeck coefficient, electrical conductivity, and thermal diffusivity were measured from room temperature to 150°C. The carrier concentration of the matrix (Bi₂Te₃) and the nanocomposites (NiTe/Bi₂Te₃) at room temperature were deduced from Hall-effect measurements. Addition of NiTe decreased the carrier concentration, and the power factor increased in the 1?vol.% NiTe/Bi₂Te₃ compared with inclusion-free Bi₂Te₃ matrix due to an increase in mobility.     

Estimation of the daily global solar radiation; Nepal experience

This work focuses on estimation of global solar radiation and, in particular, it explores the effect of precipitation and temperature on solar radiation profile of Kathmandu (Nepal). An accurate knowledge of solar radiation distribution in each particular geographical location is crucial for the promotion of solar energy technology. The best way of knowing the amount of global solar radiation is to install quality instruments at many locations in the given region. This requires their day to day maintenance, recording and calibration, which is very costly in developing countries like Nepal. Thus, the alternative approach is to correlate meteorological measurements with appropriate models and investigate the key parameters. For the research activities the RadEst program has been used. It includes, for evaluating the daily global solar radiation values at a given latitudes, four models which estimate the atmospheric transmissivity by measurements of daily temperature range and precipitations. The model parameters are fitted in 2 years data by iterative procedures. The values obtained by these models are, then, compared with measured radiation data. The paper reports graphical and statistical evaluations suggesting that among the four models, the Modular DCBB is the best model for Kathmandu area. This result is useful for designing solar panels able to maximize the harvesting of solar energy and to reduce the chronic shortage of hydrocarbon fuel that Nepal imports in a significant amount each year.