Fatigue behaviour of a phenolic matrix composite

This paper presents results of a fatigue life investigations carried out in plate specimens of a fibre-glass-reinforced phenolic matrix composite. Tensile and Young's modulus data were obtained at four different testing temperatures (room temperature, 100, 150 and 200 °C). The fatigue S−N data were obtained at room temperature only and for two stress ratio values (R=0 and 0.4). Fatigue and tensile behaviour was assesesed in the composite with the fibres aligned in the longitudinal loading direction. The results were obtained for two values of volume fraction (0.28 and 0.42) and three different glass surface treatments. A detailed comparison of fatigue results is given taking into account several fatigue parameters and also the testing variables. Results of observations of SEM fracture surfaces are also presented.     

Is floating photovoltaic better than conventional photovoltaic? Assessing environmental impacts

Photovoltaic (PV) solar energy installations are growing all over the world as a promising renewable alternative to generate electricity. However, many studies have highlighted some drawbacks associated with the installation and operation of conventional solar energy power plants. Thus, floating photovoltaic (FPV) systems have been emerging as a new concept in solar energy to lessen negative environmental impacts caused by allocation of conventional PV facilities. This paper is an overview of the potential negative and positive environmental impacts caused by photovoltaic systems with particular interest on large-scale conventional and floating photovoltaic. This study addresses and compares the impacts at all phases of project implementation, which covers planning, construction, and operation and decommissioning, focusing on ambient located in the tropics. The overall impacts associated with project allocation such as deforestation (for the project implementation and site accessing), bird mortality, erosion, runoff, and change in microclimate are expected to have higher magnitudes for the implementation of conventional PV facilities. The results highlight advantages of FPV over conventional PV during the operational and decommissioning phases as well. Though, further studies are required to assess both qualitative and quantitative aspects of installations in similar areas.     

The dorsolateral pre‑frontal cortex bi‑polar error‑related potential in a locked‑in patient implanted with a daily use brain–computer interface

While brain computer interfaces (BCIs) offer the potential of allowing those suffering from loss of muscle control to once again fully engage with their environment by bypassing the affected motor system and decoding user intentions directly from brain activity, they are prone to errors. One possible avenue for BCI performance improvement is to detect when the BCI user perceives the BCI to have made an unintended action and thus take corrective actions. Error-related potentials (ErrPs) are neural correlates of error awareness and as such can provide an indication of when a BCI system is not performing according to the user’s intentions. Here, we investigate the brain signals of an implanted BCI user suffering from locked-in syndrome (LIS) due to late-stage ALS that prevents her from being able to speak or move but not from using her BCI at home on a daily basis to communicate, for the presence of error-related signals. We first establish the presence of an ErrP originating from the dorsolateral pre-frontal cortex (dLPFC) in response to errors made during a discrete feedback task that mimics the click-based spelling software she uses to communicate. Then, we show that this ErrP can also be elicited by cursor movement errors in a continuous BCI cursor control task. This work represents a first step toward detecting ErrPs during the daily home use of a communications BCI.     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.     

A simplified method for the evaluation of fatigue crack front shapes under mode I loading

Two-dimensional elastic or elasto-plastic models dominate the current fatigue crack growth assessment and life prediction procedures for plate components with through-the-thickness cracks. However, as demonstrated in many theoretical and experimental papers, the stress field near the crack tip is always three-dimensional and, as a result, the fatigue crack front is not straight. It is normally curved towards the plate faces. Over the past few years there were a number of very careful numerical studies focusing on the evaluation of fatigue crack front shapes. However, the application of the direct numerical techniques to fatigue phenomena is a very tedious and time consuming process and, sometimes, it is quite ambiguous. In the current paper we develop a simplified method for the evaluation of the front shapes of through-the-thickness fatigue cracks. Further, we validate the developed method against experimental results, investigate the influence of various parameters on the crack front shapes at stable (steady-state) propagation and analyse the differences in the results of fatigue crack growth evaluation obtained with two- and three-dimensional approaches.     

Oxidative Stability and Changes in Chemical Composition of Extra Virgin Olive Oils After Short‐Term Deep‐Frying of French Fries

We aimed at investigating oxidative stability and changes in fatty acid and tocopherol composition of extra virgin olive oil (EVOO) in comparison with refined seed oils during short‐term deep‐frying of French fries, and changes in the composition of the French fries deep‐fried in EVOO. EVOO samples from Spain, Brazil, and Portugal, and refined seed oils of soybean and sunflower were studied. Oil samples were used for deep‐frying of French fries at 180 °C, for up to 75 min of successive frying. Tocopherol and fatty acid composition were determined in fresh and spent vegetable oils. Tocopherol, fatty acid, and volatile composition (by SPME–GC–MS) were also determined in French fries deep‐fried in EVOO. Oil oxidation was monitored by peroxide, acid, and p‐anisidine values, and by Rancimat after deep‐frying. Differential scanning calorimetry (DSC) analysis was used as a proxy of the quality of the spent oils. EVOOs presented the lowest degree of oleic and linoleic acids losses, low formation of free fatty acids and carbonyl compounds, and were highly stable after deep‐frying. In addition, oleic acid, tocopherols, and flavor compounds were transferred from EVOO into the French fries. In conclusion, EVOOs were more stable than refined seed oils during short‐term deep‐frying of French fries and also contributed to enhance the nutritional value, and possibly improve the flavor, of the fries prepared in EVOO.     

Enzymatic de-glycosylation of rutin improves its antioxidant and antiproliferative activities

Bioavailability and biological properties of flavonoid glycosides can be improved after the enzymatic hydrolysis of specific glycosyl groups. In this study, we evaluate the antioxidant and antiproliferative potential of rutin after enzymatic hydrolysis performed by α-l-rhamnosidases (hesperidinase from Penicillium sp. and naringinase from Penicillium decumbens) previously heated at 70 °C for 30 min to inactivate the undesirable β-d-glucosidase activity. The highest in vitro antioxidant activity determined by DPPH radical scavenging was achieved with rutin hydrolyzed by hesperidinase. Rutin was predominantly bioconverted into quercetin-3-glucoside. There was no statistical difference between xanthine oxidase inhibition by rutin before and after hydrolysis. However, in vitro inhibitory activity against ten human tumor cell lines showed that hydrolyzed rutin exerted a more potent antiproliferative effect than quercetin and rutin on various cancer cell lines, specially glioma, and ovarian and breast adenocarcinomas. These results indicate that quercetin-3-glucoside could be a promising functional derivative obtained by rutin hydrolysis.     

Limnological features of Funil Reservoir (R.J., Brazil) and indicator properties of rotifers and cladocerans of the zooplankton community

Funil Reservoir receives inflow from a highly industrialized region and acts as a natural sink to pollutants. Among the consequences of the uncontrolled nutrient loading is the constant presence and periodic heavy blooms of Microcystis aeruginosa . This study verified limnological features and zooplankton assemblage of the Funil Reservoir focusing on the environmental-indicator properties of rotifers and cladocerans. The summer bloom of M. aeruginosa caused reductions in water transparency, nitrate and orthophosphate concentrations and raises in chlorophyll a , pH, dissolved oxygen and chemical oxygen demand values. All zooplankton species presented spatial and temporal variations with the exception of the copepods, which were present in all samples. According to canonical correspondence analysis, ammonium was the variable most related to zooplankton variability and different Rotifera and Cladocera assemblages indicated distinct environment conditions. Rotifer taxa associated with increases of water temperature and chlorophyll a concentration were found with high densities during M. aeruginosa blooms. Species of rotifer and cladocerans are suggested as indicators that can be used to identify different physical and chemical gradients or eutrophic increases in Funil Reservoir.     

Partial oxidation of methane over bimetallic nickel–lanthanide oxides

The study of partial oxidation of methane (POM) over bimetallic nickel–lanthanide oxides was undertaken. Binary intermetallic compounds of the type LnNi (Ln = Pr, Gd, Lu) were used as bimetallic nickel–lanthanide oxides precursors and the products (NiO·Pr₂NiO₄, 2NiO·Gd₂O₃ and 2NiO·Lu₂O₃) were characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Raman and temperature programmed reduction. The catalytic activity increases when gadolinium or lutetium replaces praseodymium and the selectivity of the bimetallic nickel–lanthanide oxides is clearly different from that of single metal oxides and/or mechanical mixtures.The existence of an unusual synergism effect between the two metal oxide phases (NiO and Ln₂O₃) that lead to higher conversions of methane and higher selectivities to hydrogen and carbon monoxide correlate also the catalysts stability to deactivation. The activity and selectivity of the gadolinium and lutetium compounds is, under the same conditions, equivalent to that of a platinum commercial catalyst, 5 wt% Pt/Al₂O₃, which stresses the good catalytic performance of this new type of compounds for the production of H₂ and CO (H₂/CO = 2).