Use of 3D modelling and several ultrasound sensors to assess overflow rate.

A new instrumentation mode has been put in place in order to determine the overflow rate of five complex CSOs of the system in Sélestat (French), which are subject to self monitoring. 3D and 1D models have made it possible to predict the shapes of the water lines and suggest a location for the ultrasound sensors. In order to validate the instrumentation principle, three overhead sensors were placed on a weir. The overflow laws suggested are of the type Q(overflow) = a1h1b1 + a2h2b2 + a3h3b3. Early results of the overflow rate that have been obtained by applying the law are close to 10 % of the flow measured in the physical test bench. On the actual site, the ultrasound sensors were assembled on a rail covering the entire weir in order to be able to change their position in future after models calibration.     

Distribution and Fate of Escherichia coli in Lake Michigan Following Contamination with Urban Stormwater and Combined Sewer Overflows

Escherichia coli distribution and persistence in nearshore Lake Michigan were assessed following heavy rains and sanitary sewer overflow (SSO) and combined sewer overflow (CSO) events over a 5-year period, including an 18-day period following 25.4 cm of rainfall in which intensive studies were conducted following multiple CSO and SSO events. E. coli levels in the Milwaukee estuary and harbor following SSO and CSO events ranged from 10⁴ to nearly 10⁵ CFU/100 mL, which were significantly higher (p ≤ 0.05) than levels following rainfall alone. Sites outside of the breakwall but within the contamination plume (e.g., within 2 km of the harbor) were an order of magnitude lower. Locations 2–5 km from the harbor ranged from below detection limits, of < 1 to 5 CFU/100 mL. E. coli levels corrected for dilution based on specific conductivity measurements were lower than what would be expected for loss due to dilution alone, suggesting a combination of die-off and dilution, were responsible for the rapid disappearance of these organisms outside of the harbor. E. coli and fecal coliforms measured concurrently demonstrated that fecal coliforms could be recovered longer than E. coli in the open waters of the lake. E. coli isolated directly from sewage treatment plant influent were found to have a marked increase in antibiotic resistance traits for ten antibiotics commonly used in the human population compared with isolates from two animal sources of fecal pollution. However, E. coli obtained from sewage impacted water (n = 2,513) and from stormwater impacted water (n = 1,465) collected the previous year when there were no sewage overflows, were found to have no significant difference (p < 0.05) in the frequency of resistance when comparing the two conditions. E. coli survival characteristics and population dynamics are most likely influenced by multiple factors in complex systems such as the watershed/estuarine/lake environments of the Great Lakes.     

Exosomal Cargo May Hold the Key to Improving Reproductive Outcomes in Dairy Cows

The reproductive status of dairy cows remains a challenge for dairy farmers worldwide, with impaired fertility linked to a significant reduction in herd profitability, due in part to impaired immunity, increased metabolic pressure, and longer postpartum anestrous interval (PPAI). Exosomes are nanovesicles released from a variety of cell types and end up in circulation, and carry proteins, bioactive peptides, lipids, and nucleic acids specific to the place of origin. As such, their role in health and disease has been investigated in humans and animals. This review discusses research into exosomes in the context of reproduction in dairy herds and introduces recent advances in mass-spectrometry (MS) based proteomics that have a potential to advance quantitative profiling of exosomal protein cargo in a search for early biomarkers of cattle fertility.     

Constructive quantum scaling of unitary matrices

In this work, we present a method of decomposition of arbitrary unitary matrix \(U\in \mathbf {U}(2^k)\) into a product of single-qubit negator and controlled-\(\sqrt{\text{ NOT }}\) gates. Since the product results with negator matrix, which can be treated as complex analogue of bistochastic matrix, our method can be seen as complex analogue of Sinkhorn–Knopp algorithm, where diagonal matrices are replaced by adding and removing an one-qubit ancilla. The decomposition can be found constructively, and resulting circuit consists of \(O(4^k)\) entangling gates, which is proved to be optimal. An example of such transformation is presented.     

Central limit theorem for reducible and irreducible open quantum walks

In this work we aim at proving central limit theorems for open quantum walks on \({\mathbb {Z}}^d\). We study the case when there are various classes of vertices in the network. In particular, we investigate two ways of distributing the vertex classes in the network. First, we assign the classes in a regular pattern. Secondly, we assign each vertex a random class with a transition invariant distribution. For each way of distributing vertex classes, we obtain an appropriate central limit theorem, illustrated by numerical examples. These theorems may have application in the study of complex systems in quantum biology and dissipative quantum computation.     

Path Loss Modelling for Location Service Applications

The aim of this paper is the path loss modelling for the radiolocation services in radio communication networks, particularly in cellular networks. The main results of the measurements obtained in the physical layer of the UMTS are introduced. A new method for the utilization of the multipath propagation phenomenon to improve the estimation of the distance between the MS （mobile station） and the BS （base station） is outlined. This method significantly increases the quality of location services in systems which use a radio interface with DS （direct sequence） CDMA （code division multiple access）.     

Determination of porosity of reduced hematite by stereologic methods

The stereologic analysis of a solid grain has been applied for determination of its porosity. The investigations were carried out on a natural hematite grain reduced to magnetite at 723 K. Stereologic analysis enabled the porosity of this material to be determined on the basis of independently measured grain contours and volume fractions of grain components: hematite, magnetite and pores. A conformity criterion has been formulated, regarding determination of grain volume on the basis of known densities of components and their measured volume fractions in the grain, and on the basis of weight and apparent grain density measurements. The volume increase accompanying reduction of hematite to magnetite, determined from these independent measurements, was in the range 7–19%. By measuring Ferets diameter, the volume of the convex envelope of the grain increased as a result of phase transformation by about 11%. Simultaneously, the volume of the solid phase was found to decrease by 1.5%. The total porosity of the reduced grain, determined by stereologic analysis amounted to 17.5%; 7.7% of which was related to cracks and large pores, and 9.8% to small pores in the magnetite phase. The porosity value determined by the classical mercury method was approximately the same.