Film thickness in point contacts under generalized Newtonian EHL conditions: Numerical and experimental analysis

The current paper contributes to the understanding of the behaviour of a smooth point EHL contact with a generalized Newtonian lubricant under pure rolling. The film thickness distribution was computed using a numerical simulation with measured rheological lubricant properties. The numerical predictions, obtained solving the generalized Reynolds equation were compared with film thicknesses measured in an optical ball-on-disc device. The numerical results correctly predict the absolute film thickness and the film thickness increase with rolling speed.     

Thermal Oxidation Mechanism of Polyalphaolefin Greases with Lithium Soap and Diurea Thickeners: Effects of the Thickener

In this work, lithium and diurea greases formulated by poly-alpha-olefin were aged up to 1,200 h in an oven at 120°C and periodically taken out for testing. Scanning electron microscopy (SEM) and infrared (IR) spectra proved that both physical and chemical degradation occurred during the thermal aging process, such as a decrease in apparent viscosity, thickener destruction, and change in chemical species. Diurea grease showed much better anti-oxidation performance during thermal aging than lithium grease. A dual effect of thermal aging on the grease lubricity was observed and analyzed. Results showed that early oxidation might reduce grease lubricity due to the formation of ketones and aldehydes, and the decrease in grease viscosity and oil bleeding due to thickener destruction would contribute to better replenishment.     

Fundamentals of Materials Science: The Microstructure-Property Relationship Using Metals as Model Systems, 2nd Edition,by Eric J. Mittemeijer,Springer Nature Switzerland AG 2021

Journal of Materials Science -     

Current Understanding of Structure–Processing–Property Relationships in BaTiO3–Bi(M)O3 Dielectrics

As part of a continued push for high permittivity dielectrics suitable for use at elevated operating temperatures and/or large electric fields, modifications of BaTiO₃ with Bi(M)O₃, where M represents a net‐trivalent B‐site occupied by one or more species, have received a great deal of recent attention. Materials in this composition family exhibit weakly coupled relaxor behavior that is not only remarkably stable at high temperatures and under large electric fields, but is also quite similar across various identities of M. Moderate levels of Bi content (as much as 50 mol%) appear to be crucial to the stability of the dielectric response. In addition, the presence of significant Bi reduces the processing temperatures required for densification and increases the required oxygen content in processing atmospheres relative to traditional X7R‐type BaTiO₃‐based dielectrics. Although detailed understanding of the structure–processing–property relationships in this class of materials is still in its infancy, this article reviews the current state of understanding of the mechanisms underlying the high and stable values of both relative permittivity and resistivity that are characteristic of BaTiO₃‐Bi(M)O₃ dielectrics as well as the processing challenges and opportunities associated with these materials.     

The Development of a Spacer Layer Imaging Method (SLIM) for Mapping Elastohydrodynamic Contacts

Optical interferometry has proved to be a valuable experimental tool in the study of elastohydrodynamic lubrication (EHD). It is a technique that gives detailed information on the lubricant film distribution within the contact; however, the sensitivity is limited and it is only recently, with the development of the spacer layer optical technique, that the study of the thin film lubrication regime has been possible. The limitation of the spacer layer technique is that generally only one measurement is taken from the center of the contact. The next logical step in the development of this technique is, therefore, a system that combines the mapping capabilities of the original optical method with the thin film capabilities of the spacer layer approach.

This paper describes the development of a contact mapping technique that uses the spacer layer approach to visualize, and measure, thin lubricant films in concentrated contacts. The development of the technique is described and its application to both static and moving contacts reported. Thin EHD films (down to 10 nm) have been measured and mapped.     

Introduction to the Special Issue on the Applications of Ferroelectrics

This special issue of the Transactions is a compilation of the most important papers presented at the 17th IEEE International Symposium on Applications of Ferroelectrics (ISAF). This was a joint meeting with the Electronics Division of the American Ceramics Society that was held at the Eldorado Hotel and Spa in Santa Fe, New Mexico, from February 24?27, 2008. The meeting was host to over 300 conference attendees and over 250 technical presentations. Presentations covered a wide range of technical topics, including processing, advanced characterization, theory and modeling of ferroelectrics, FERAM devices, capacitors, piezoelectrics, ultrasonics, multiferroics, and energy harvesting materials and devices.     

Reversible binding of chlorpromazine to brain tubulin

Isolated lamb hearts perfused at 13degrees C. with acellular perfusates developed progressive intersitital edema and a rise in vascular resistance. They did not exhbit any electrical or mechanical activity. In contrast, hearts perfused with whole fresh blood remained well preserved, had no edema or change in vascular resistance, and contracted vigorously while being perfused at 10degrees and 13degrees C. This study was designed to determine which particular component(s) of whole blood contributed to improved cardiac preservation. Isolated lamb hearts were perfused for 18 hours at 13degrees C. with plasma containing platelets and some or no red blood cells. Continuously fresh plasma was obtained from a donor animal by means of a flow-through centrifuge. Hearts perfused at 13degrees C. with fresh plasma of either low or high platelet count contracted during the initial 2 to 4 hours of the perfusion only and were as poorly preserved as hearts perfused with acellular microfiltered plasma. A hematocrit value of 2 to 5 per cent in the plasma perfusate resulted in the hearts being preserved almost as well as with fresh whole blood; they showed a forceful cardiac activity at 13degrees C., there was no edema, the vascular resistance was stable, and after rewarming they had good ventricular function. The improvement in cardiac preservation brought about by addition of a minimal amount of red blood cells suggests a specific effect of erythrocytes on the cardiac microcirculation.