Surface wave modes of printed circuits on ferrite substrates

Surface waves due to a current source on a grounded ferrite slab are investigated. Electromagnetic fields of the structure are in terms of a continuous plane wave spectrum. The spectrum of each field component is obtained numerically through the exponential-matrix method. The surface waves of the structure are extracted from the continuous spectrum by using the residue theorem and the method of steepest descent. Two types of surface waves are found and their properties are described. The surface wave modes found include dynamic surface wave modes which are closely related to the surface waves of a grounded dielectric slab, and magnetostatic surface wave modes which are related to the solution of Laplace's equation for the magnetic potential     

Criteria for nearly omnidirectional radiation patterns for printed antennas

Radiation from printed antennas is investigated with emphasis placed on producingbar{E}- andbar{H}-plane radiation patterns that are as nearly omnidirectional as possible. This is achieved using criteria which are derived for a nonzero radiation field extending down to the layer surface (radiation into the horizon). It is determined that this phenomenon arises when a surface wave pole coincides with a branch point in the complex plane. A simple ray optics interpretation is given for the phenomenon, and graphs are presented to easily enable design of printed antenna geometry to achieve nearly omnidirectionalbar{E}- orbar{H}-plane patterns.     

An asymptotic extraction technique for evaluating Sommerfeld-type integrals

An asymptotic extraction process is developed which leads to an efficient method for the evaluation of the electric field from a Hertzian dipole in a layered geometry. This technique allows for a rapidly converging expression for the electric field which remains well behaved as the source and observation heightsz', zcoincide. A useful application of this method is in the calculation of mutual impedance between printed dipoles.     

Microstrip dipoles on electrically thick substrates

Certain basic radiation properties of microstrip dipoles on electrically thick substrates are investigated, and a comparison is made with the case of dipoles printed on a dielectric half-space. It is concluded that the microstrip dipole radiation properties become sensitive to substrate loss as the substrate thickness increases, with the half-space properties obtained for an adequate amount of loss. Asymptotic formulas for radiated power and efficiency are given for both the thick substrate and half-space problems, showing the behavior with increasing dielectric constant. The method of moments is used to extend the analysis to center-fed strip dipoles, and a method of improving both the efficiency and gain of a printed antenna by using a superstrate layer is discussed.     

Expanding the Spectrum of Antibiotics Capable of Killing Multidrug-Resistant Staphylococcus aureus and Pseudomonas aeruginosa

Infections from antibiotic-resistant Staphylococcus aureus and Pseudomonas aeruginosa are a serious threat because reduced antibiotic efficacy complicates treatment decisions and prolongs the disease state in many patients. To expand the arsenal of treatments against antimicrobial-resistant (AMR) pathogens, 600-Da branched polyethylenimine (BPEI) can overcome antibiotic resistance mechanisms and potentiate β-lactam antibiotics against Gram-positive bacteria. BPEI binds cell-wall teichoic acids and disables resistance factors from penicillin binding proteins PBP2a and PBP4. This study describes a new mechanism of action for BPEI potentiation of antibiotics generally regarded as agents effective against Gram-positive pathogens but not Gram-negative bacteria. 600-Da BPEI is able to reduce the barriers to drug influx and facilitate the uptake of a non-β-lactam co-drug, erythromycin, which targets the intracellular machinery. Also, BPEI can suppress production of the cytokine interleukin IL-8 by human epithelial keratinocytes. This enables BPEI to function as a broad-spectrum antibiotic potentiator, and expands the opportunities to improve drug design, antibiotic development, and therapeutic approaches against pathogenic bacteria, especially for wound care.     

In Vivo Behavior of Ultrasmall Spherical Nucleic Acids

The biological properties of spherical nucleic acids (SNAs) are largely independent of nanoparticle core identity but significantly affected by oligonucleotide surface density. Additionally, the payload-to-carrier (i.e., DNA-to-nanoparticle) mass ratio of SNAs is inversely proportional to core size. While SNAs with many core types and sizes have been developed, all in vivo analyses of SNA behavior have been limited to cores >10 nm in diameter. However, “ultrasmall” nanoparticle constructs (<10 nm diameter) can exhibit increased payload-to-carrier ratios, reduced liver accumulation, renal clearance, and enhanced tumor infiltration. Therefore, we hypothesized that SNAs with ultrasmall cores exhibit SNA-like properties, but with in vivo behavior akin to traditional ultrasmall nanoparticles. To investigate, we compared the behavior of SNAs with 1.4-nm Au₁₀₂ nanocluster cores (AuNC-SNAs) and SNAs with 10-nm gold nanoparticle cores (AuNP-SNAs). Significantly, AuNC-SNAs possess SNA-like properties (e.g., high cellular uptake, low cytotoxicity) but show distinct in vivo behavior. When intravenously injected in mice, AuNC-SNAs display prolonged blood circulation, lower liver accumulation, and higher tumor accumulation than AuNP-SNAs. Thus, SNA-like properties persist at the sub-10-nm length scale and oligonucleotide arrangement and surface density are responsible for the biological properties of SNAs. This work has implications for the design of new nanocarriers for therapeutic applications.     

Design of Trehalose-Based Amide/Sulfonamide C-type Lectin Receptor Signaling Compounds

Mincle agonists have been shown to induce inflammatory cytokine production, such as tumor necrosis factor-alpha (TNF) and promote the development of a Th1/Th17 immune response that might be crucial to development of effective vaccination against pathogens such as Mycobacterium tuberculosis. As an expansion of our previous work, a library of 6,6′-amide and sulfonamide α,α-d -trehalose compounds with various substituents on the aromatic ring was synthesized efficiently in good to excellent yields. These compounds were evaluated for their ability to activate the human C-type lectin receptor Mincle by the induction of cytokines from human peripheral blood mononuclear cells. A preliminary structure–activity relationship (SAR) of these novel trehalose diamides and sulfonamides revealed that aryl amide-linked trehalose compounds demonstrated improved activity and relatively high potency cytokine production compared to the Mincle ligand trehalose dibehenate adjuvant (TDB) and the natural ligand trehalose dimycolate (TDM) inducing dose-dependent and human-Mincle-specific stimulation in a HEK reporter cell line.     

Quality Indices for Aluminum Alloy Castings: A Critical Review

Several indices are available in the literature to assess the structural quality of cast Al alloys, especially Al-7 pct Si-Mg alloys that are based on tensile test results. Some of these indices, most notably the one developed by Drouzy et al., provide a number that necessarily does not have a physical meaning, whereas the others are a measure of what fraction of the expected tensile performance is achieved. These indices are analyzed in depth, their similarities and shortcomings are discussed in detail, and recommendations are made.     

Searching for differences in race: Is there evidence for preferential detection of other-race faces?

Previous research has suggested that like animal and social fear-relevant stimuli, other-race faces (African American) are detected preferentially in visual search. Three experiments using Chinese or Indonesian faces as other-race faces yielded the opposite pattern of results: faster detection of same-race faces among other-race faces. This apparently inconsistent pattern of results was resolved by showing that Asian and African American faces are detected preferentially in tasks that have small stimulus sets and employ fixed target searches. Asian and African American other-race faces are found slower among Caucasian face backgrounds if larger stimulus sets are used in tasks with a variable mapping of stimulus to background or target. Thus, preferential detection of other-race faces was not found under task conditions in which preferential detection of animal and social fear-relevant stimuli is evident. Although consistent with the view that same-race faces are processed in more detail than other-race faces, the current findings suggest that other-race faces do not draw attention preferentially. (PsycINFO Database Record (c) 2010 APA, all rights reserved)