Free vibration of partially supported piles with the effects of bending moment, axial and shear force

The pile parts above the soil and embedded in the soil are called the first region and the second region, respectively. The fourth order partial differential equations of both regions for free vibration of partially supported pile subjected to bending moment, axial force and shear force are obtained using the small-displacement theory and the Winkler model. It is assumed that the behavior of the material is linear-elastic, and that axial force along the pile length and modulus of subgrade reaction for the second region to be constant. Shear effect is included in the partial differential equations by the second derivative of the elastic curve function with respect to shear deformation. Natural circular frequencies and relative stiffness of the pile are calculated for non-trivial solution of linear homogeneous system of equations obtained due to the values of axial forces acting on the pile, the shape factors, and the boundary conditions of the pile with both ends free and both ends simply supported; the results are presented in graphs.     

Analysis of antioxidants extracted from polypropylene by supercritical fluid extraction.

Maximal potential migration of six antioxidants (AO) from five polypropylene (PP) formulations was determined by two supercritical fluid extraction (SFE) procedures, both of which contained static and dynamic steps. All analytical conditions affecting the extraction were studied and optimized using Irgafos 168 as standard. SFE was more efficient as temperature and fluid density increased. During the static step in which the samples were exposed to the fluid without flux, the introduction of hexane and methanol as fluid modifiers significantly improved the extraction. Hexane appears to facilitate polymer swelling while methanol solvates the antioxidants. In the dynamic step (in which the extraction actually occurs) time is the key parameter. Extraction for 90 min results in an efficiency of around 75%. The introduction of modifiers during this step (by an HPLC-SFE procedure) did not produce any significant improvement. When SFE was carried out on all samples, extraction efficiency was around 75% except for Irganox 1010 and Hostanox O3. The large molecular volume of these antioxidants may be responsible for the considerable reduction of extraction efficiency. Particle size and shape of polymer sample were also important. The greater the surface to volume ratio the greater the extraction efficiency.     

TangiWheel: A Widget for Manipulating Collections on Tabletop Displays Supporting Hybrid Input Modality

In this paper we present TangiWheel,a collection manipulation widget for tabletop displays.Our implementation is flexible,allowing either multi-touch or interaction,or even a hybrid scheme to better suit user choice and convenience.Different TangiWheel aspects and features are compared with other existing widgets for collection manipulation.The study reveals that TangiWheel is the first proposal to support a hybrid input modality with large resemblance levels between touch and tangible interaction styles.Several experiments were conducted to evaluate the techniques used in each input scheme for a better understanding of tangible surface interfaces in complex tasks performed by a single user (e.g.,involving a typical master-slave exploration pattern).The results show that tangibles perform significantly better than fingers,despite dealing with a greater number of interactions,in situations that require a large number of acquisitions and basic manipulation tasks such as establishing location and orientation.However,when users have to perform multiple exploration and selection operations that do not require previous basic manipulation tasks,for instance when collections are fixed in the interface layout,touch input is significantly better in terms of required time and number of actions.Finally,when a more elastic collection layout or more complex additional insertion or displacement operations are needed,the hybrid and tangible approaches clearly outperform finger-based interactions.     

Optimal hydro scheduling and offering strategies considering price uncertainty and risk management

Hydro energy represents a priority in the energy policy of Portugal, with the aim of decreasing the dependence on fossil fuels. In this context, optimal hydro scheduling acquires added significance in moving towards a sustainable environment. A mixed-integer nonlinear programming approach is considered to enable optimal hydro scheduling for the short-term time horizon, including the effect of head on power production, start-up costs related to the units, multiple regions of operation, and constraints on discharge variation. As new contributions to the field, market uncertainty is introduced in the model via price scenarios and risk management is included using Conditional Value-at-Risk to limit profit volatility. Moreover, plant scheduling and pool offering by the hydro power producer are simultaneously considered to solve a realistic cascaded hydro system.     

Protection of wind energy systems against the indirect effects of lightning

This paper is concerned with the protection of wind energy systems against the indirect effects of lightning. As wind energy is gaining increasing importance throughout the world, lightning damages involving wind energy systems have come to be regarded with more attention. Nevertheless, there are still very few studies in Portugal regarding lightning protection of wind energy systems using models of the Electro-Magnetic Transients Program (EMTP). Hence, a new case study is presented in this paper, based on a wind turbine with an interconnecting transformer, considering that lightning strikes the soil near the tower at a distance such that galvanic coupling occurs through the grounding electrode. Computer simulations obtained by using EMTP-RV are presented and conclusions are duly drawn.     

Engineering model for intumescent coating behavior in a pilot‐scale gas‐fired furnace

In the event of a fire, intumescent fire protective coatings expand and form a thermally insulating char that protects the underlying substrate from heat and subsequent structural failure. The intumescence includes several rate phenomena, which have been investigated and quantified in the literature for several decades. However, various challenges still exist. The most important one concerns mathematical model validation under realistic exposure conditions and/or time scales. Another is the simplification of advanced models to overcome the often‐seen lack of a complete set of input and adjustable model parameters for a given coating, thereby providing models for industrial applications. In this work, these two challenges are addressed. Three experimental series, with an intumescent coating inside a 0.65 m³ gas‐fired furnace, heating up according to so‐called cellulosic fire conditions, were conducted and a very good repeatability was evident. The experiments were run for almost 3 h, reaching a final gas temperature of about 1100°C. Measurements include transient temperature developments inside the expanding char, at the steel substrate, and in the mineral wool insulation placed behind the substrate. A mathematical model, describing the intumescent coating behavior and temperatures in the furnace using a single overall reaction was developed and validated against experimental data. By including a decomposition front movement through the char, a good qualitative agreement was obtained. After further validation against experiments with other coating formulations, it has potential to become a practical engineering tool. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3947–3962, 2016     

Modeling microwave power structures based on k-furcated waveguides arbitrarily filled with materials by modal techniques.

Waveguide structures are very popular in the microwave power industry due to their power handling capabilities. Modal expansion of the waveguide fields and application of the circuit theory allow for the division of a complex device into several simpler sections which can be analyzed separately with the best suited method. The modal techniques can be divided into two groups--those which analyze junctions or discontinuities and those which examine propagation characteristics. In this paper, a review of modal techniques for high power applications is given. Modal expansion of the fields in the waveguides is then performed and applied to modeling of k-furcated waveguides. The modal analysis based on the Coupled Mode Method is described for the waveguides partially filled with isotropic materials. A hybrid modal analysis coupled with Finite Element Method suitable for more complex waveguide structures is also described. Computational results obtained for some real-life microwave devices are presented. Excellent agreement was found when comparing the results with those generated with a commercial FDTD simulator demonstrates the validity and reliability of the proposed method.     

Electricity production from twelve monosaccharides using microbial fuel cells

Direct generation of electricity from monosaccharides of lignocellulosic biomass was examined using air cathode microbial fuel cells (MFCs). Electricity was generated from all carbon sources tested, including six hexoses (d-glucose, d-galactose, d(−)-levulose (fructose), l-fucose, l-rhamnose, and d-mannose), three pentoses (d-xylose, d(−)-arabinose, and d(−)-ribose), two uronic acids (d-galacturonic acid and d-glucuronic acid) and one aldonic acid (d-gluconic acid). The mixed bacterial culture, which was enriched using acetate as a carbon source, adapted well to all carbon sources tested, although the adaptation times varied from 1 to 70 h. The maximum power density obtained from these carbon sources ranged from 1240 ± 10 to 2770 ± 30 mW m⁻² at current density range of 0.76–1.18 mA cm⁻². d-Mannose resulted in the lowest maximum power density, whereas d-glucuronic acid generated the highest one. Coulombic efficiency ranged from 21 to 37%. For all carbon sources tested, the relationship between the maximum voltage output and the substrate concentration appeared to follow saturation kinetics at 120 Ω external resistance. The estimated maximum voltage output ranged between 0.26 and 0.44 V and half-saturation kinetic constants ranged from 111 to 725 mg L⁻¹. Chemical oxygen demand (COD) removal was over 80% for all carbon sources tested. Results from this study indicated that lignocellulosic biomass-derived monosaccharides might be a suitable resource for electricity generation using MFC technology.     

High efficiency and reusability of iridium complexes adsorbed in montmorillonite clay on catalytic hydrogenation of imines

Heterogenised homogeneous catalytic hydrogenation of aldimines by removable and reusable immobilised iridium complexes on montmorillonite clay. This revised version was published online in July 2006 with corrections to the Cover Date.