Postoperative analgesia. Simple methods for improvements exist

An improved, combined staining method for myofibrillar ATPase (m-ATPase) and for acetylcholinesterase activity is described. This method allows the observations, on the same slide, of the classical histochemical m-ATPase profile following the Brooke and Kaiser technique and the neuromuscular junction morphology. Thus the pattern of innervation, nerve ending structure and number of nerve endings along the fibres is shown simultaneously for the basic differentiation between slow and fast fibres. The use of acidic and alkaline preincubation allows better visualization of endplate morphology and avoids the masking effect of a positive m-ATPase reaction. The technique has been validated on skeletal muscles from avian and mammalian species.     

Dielectric Properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24

The dielectric properties of dense ceramics of the "twinned" 8H-hexagonal perovskite Ba₈Nb₄Ti₃O₂₄ are reported. Single-phase powders were obtained from the mixed-oxide route at 1325°C and ceramics (>92% of the theoretical X-ray density) by sintering in air or flowing O₂ at 1400°–1450°C. The ceramics are dc insulators with a band gap >3.4 eV that resonate at microwave frequencies with relative permittivity, ɛ_r∼44–48, quality factor, Q × f _r∼21 000–23 500 GHz (at f _r∼5.5 GHz) and temperature coefficient of resonant frequency, TC _f,∼+115 ppm/K.     

The synthesis of pixelated metamaterial cross polarizer using binary wind driven optimization algorithm

Microsystem Technologies - In this paper synthesis of two wideband Metamaterial Cross Polarizer (MCPs) is proposed. The synthesis of proposed MCPs is done by using Binary Wind Driven Optimization...     

An automated software reliability prediction system for safety critical software

Software reliability is one of the most important software quality indicators. It is concerned with the probability that the software can execute without any unintended behavior in a given environment. In previous research we developed the Reliability Prediction System (RePS) methodology to predict the reliability of safety critical software such as those used in the nuclear industry. A RePS methodology relates the software engineering measures to software reliability using various models, and it was found that RePS’s using Extended Finite State Machine (EFSM) models and fault data collected through various software engineering measures possess the most satisfying prediction capability. In this research the EFSM-based RePS methodology is improved and implemented into a tool called Automated Reliability Prediction System (ARPS). The features of the ARPS tool are introduced with a simple case study. An experiment using human subjects was also conducted to evaluate the usability of the tool, and the results demonstrate that the ARPS tool can indeed help the analyst apply the EFSM-based RePS methodology with less number of errors and lower error criticality.     

Structural and Luminescence Studies on Barium Sodium Borosilicate Glasses Containing Uranium Oxides

Barium sodium borosilicate glasses containing different amounts of uranium oxides were prepared by conventional melt quench method and investigated for their structural aspects by ²⁹Si and ¹¹B MAS NMR technique combined with steady‐state luminescence and lifetime measurements. Based on MAS NMR studies, it is confirmed that uranium ions act as network modifier up to 15 wt% and beyond which a separate uranium containing phase is formed. From the luminescence studies, it is inferred that uranyl species is in a highly distorted environment. For more than 15 wt% uranium oxide incorporation, weaker U–O–U linkages are formed at the expense stronger U–O–Si/B linkages, as suggested by the excited state lifetime value of the uranyl species as well as red shift in emission peak maximum. For glass samples containing more than 25 wt% uranium oxides, crystalline barium uranium silicate gets phase separated from glass matrix as confirmed by XRD studies.     

Effect of pH on the detailed chemical nature and metal-carbonate species in as synthesized zirconia alumina composites

Zirconia was deposition precipitated on γ-alumina in pH range 7-10 from zirconium oxy-nitrate and soda ash. Zirconium formed its hydroxycarbonate as deduced from ICP-EOS, CHN, and TGA-MS. Higher pH favored formation of carbonate species of zirconium over its hydroxide. TGA-MS indicated formation of three different types of carbonate species. FTIR results corroborated this. Monodentate metal carbonate was observed irrespective of pH of preparation. In addition, bridged bidentate species formed at pH ≤ 8 which changed to chelating bidentate at pH > 8. XRD indicated that all the samples formed tetragonal-zirconia upon calcination irrespective of pH of preparation. Higher pH resulted in smaller crystallites of t-ZrO₂. Changes in chemical moiety with pH reflected on acidity and the deactivation rate for 2-methyl-3-butyn-2-ol which decreased by two orders of magnitude in samples prepared at higher pH. Surface area and pore volume benefited from deposition precipitation. SEM-EDAX showed reasonable distribution of zirconia over γ-Al₂O₃.     

Biaxial tensile behavior of spunbonded nonwoven geotextiles

Geotextiles can be successfully employed for any geotechnical application when they are able to sustain pre-defined levels of tensile stresses. The biaxial tensile test has an advantage over other tensile test methods in that it does not allow “necking” during deformation which simulates the operational conditions of geotextiles under confined stresses. In this study, the model for uniaxial tensile behavior of nonwovens has been modified to investigate the biaxial tensile behavior of spunbonded geotextiles. The model has included the effect of fiber re-orientation, stress-strain behavior of constituent fibers, and physical characteristics of nonwovens when the geotextile specimen is laterally constrained. A comparison is made between predicted and experimental stress-strain curves obtained from previous work (Bais-Singh and Goswami, 1998). Theoretical findings of biaxial tensile behavior obtained using the layer theory are also critically discussed. In addition, it has been revealed that fiber re-orientation is a key factor in translating the random spunbonded nonwoven geotextiles to anisotropic structures under defined biaxial tensile stresses.     

Dynamic Spectrum Access with QoS and Interference Temperature Constraints

Spectrum is one of the most precious radio resources. With the increasing demand for wireless communication, efficiently using the spectrum resource has become an essential issue. With the Federal Communications Commission's (FCC) spectrum policy reform, secondary spectrum sharing has gained increasing interest. One of the policy reforms introduces the concept of an interference temperature - the total allowable interference in a spectral band. This means that secondary users can use different transmit powers as long as the sum of these power is less than the interference threshold. In this paper, we study two problems in secondary spectrum access with minimum signal to interference noise ratio (quality of service (QoS)) guarantee under an interference temperature constraint. First, when all the secondary links can be supported, a nonlinear optimization problem with the objective to maximize the total transmitting rate of the secondary users is formulated. The nonlinear optimization is solved efficiently using geometric programming techniques. The second problem we address is, when not all the secondary links can be supported with their QoS requirement, it is desirable to have the spectrum access opportunity proportional to the user priority if they belong to different priority classes. In this context, we formulate an operator problem which takes the priority issues into consideration. To solve this problem, first, we propose a centralized reduced complexity search algorithm to find the optimal solution. Then, in order to solve this problem distributively, we define a secondary spectrum sharing potential game. The Nash equilibria of this potential game are investigated. The efficiency of the Nash equilibria solutions are characterized. It is shown that distributed sequential play and an algorithm based on stochastic learning attain the equilibrium solutions. Finally, the performances are examined through simulations     

Study of inductively coupled Cl2/BCl3 plasma process for high etch rate selective etching of via-holes in GaAs

We have investigated the selective etching of 50 μm diameter via-holes for etch depth >200 μm using 30 μm thick photo resist mask in Inductively Coupled Plasma system with Cl₂/BCl₃ chemistry. Resultant etch rate/etch profiles are studied as a function of ICP process parameters and photo resist mask sidewall profile. Etch yield and aspect ratio variation with process pressure and substrate bias is also investigated at constant ICP power. The etch yield of ICP process increased with pressure due to reactant limited etch mechanism and reached a maximum of ∼19 for 200 μm depth at 50 mTorr pressure, 950 W coil power, 80 W substrate bias with an etch rate ∼4.9 μm/min. Final aspect ratio of etched holes is increased with pressure from 1.02 at 20 mTorr to 1.38 at 40 mTorr respectively for fixed etch time and then decreased to 1.24 at 50 mTorr pressure. The resultant final etch profile and undercut is found to have a strong dependence on the initial slope of photo resist mask sidewall angle and its selectivity in the pressure range of 20-50mTorr.     

Development of noncontact end effector for handling of bakery products

The application of automation for handling of nonrigid or semirigid products and air permeable materials is limited due to lack of suitable end effectors. The majority of robotic manipulators and end effectors are not easily applicable because of lack of contact rigidity with nonrigid or semirigid products due to their unpredictable and unstable behaviour and with materials which are sensitive to deformation, especially bakery products (baked and unbaked) in the biscuits industry (Erzincanli and Sharp, Food Control 8:185–190, 1997). Also, during the handling process, the risk of contamination is high due to direct contact with food products. Hence, the need for noncontact robotic end effectors is strongly felt. In this paper a noncontact type end effector having a rectangular cross-section designed for handling bakery products is discussed for use in the biscuits manufacturing industry. These end effectors operate on the principle of generating vacuum, which lifts the material without any mechanical contacts. The present work explores the possibility of using radial flow nozzles in the biscuits industry. The basic working principle is presented, followed by experimental results. An automatic noncontact end effector system may be found quite useful for the food handling industry.