The ageing Australian firefighter: an argument for age-based recruitment and fitness standards for urban fire services

Currently, there is no enforcement of physical standards within Australian fire services post-recruitment, possibly leading to inappropriate fitness and body composition. This study evaluated the impacts of ageing on physical standards of Australian firefighters. Seventy-three firefighters from three different 10-year age groups [25–34 years (n = 27), 35–44 years (n = 27), 45–54 years (n = 19)] volunteered for physical testing using dual-energy X-ray analysis and existing fitness tests used for recruitment by an Australian fire service. Older (45–54 years) participants demonstrated significantly poorer physical standards compared with younger participants including cardiovascular fitness (p < 0.05), strength (p = 0.001) and simulated operational power testing tasks (p < 0.001). Age-related body composition changes were also observed independent of body mass index. Minimum recruitment standards and fitness programs need to account for age-related declines in physical capabilities to ensure that the minimum standard is maintained regardless of age.

Practitioner Summary: Using dual-energy X-ray analysis and established fitness testing protocols, this study aimed to gain an appreciation of the current standards of body composition and fitness of Australian firefighters and the effects of ageing on their physical abilities post-recruitment. The study demonstrated a significant decline in physical standards due to age.     

Characterization of zirconia-thoria-urania ceramics by X-ray and electron interactions

X-ray and electron interactions with matter were used as probes to characterize the structure and chemistry of zirconia-thoria-urania ceramics. The ceramics were prepared by coprecipitation of Zr, Th and U salts. In this study, transmission electron microscopy (TEM) techniques such as energy dispersive X-ray (EDX) analysis and electron energy loss spectroscopy (EELS) complement X-ray diffraction, extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge spectroscopy (XANES), techniques to reveal the phase structure and chemistry. The results from XRD and EDX show that these ceramics separate into a Zr-based phase and an actinide-based phase with low mutual affinity of Th and Zr, as well as partial solubility of U in Zr. The comparison of EELS spectra collected for the ceramics with spectra collected for UO₂ and U₃O₈ reference materials also allow us to assess U oxidation state independently in the two separate phases.     

Biotechnology and the fats and oils industry — An overview

Biotechnology is the application of single or multicellular organisms and of associated or derived enzyme systems to the production of desirable products. Particular discussion has been made of the derivation of fats and oils from animals, plants and microorganisms. General consideration has been given to methods, primarily plant breeding and agronomic practices for the improvement of the quantity and quality of oil produced by soybean, rapeseed, palm and sunflower. The possible importance of yeasts, fungi and algae as sources of single cell oil has been examined. A particular role of these systems in the production of specialty oils has been suggested. Enzyme systems, either associated with the intact cell or in isolation, can be used to varying degrees of success in either a free or immobilized form. Particular reference has been made to application of these systems to reactions including specific hydrolysis of triacylglycerols, acylation of glycerol, interesterification of triacylglycerols, wax ester formation and steroid transformations. Consideration has been given to particular plants and microorganisms as sources of new fats and oils. The major impact of biotechnology on the industry is believed to be associated with the production of high value specialty products including cocoa butter substitutes, biosurfactants, waxes and various prostaglandin derivatives. General consideration has been given to the possible relative importance of plant and microbial systems, engineering and scale-up problems, and overall economics of present biotechnological procedures.     

Influence of high hydrostatic pressure on the proteolysis of beta-lactoglobulin A by trypsin

This work describes the effect of the hydrolysis time and pressure (0.1-400 MPa) on the proteolysis of beta-lactoglobulin A (beta-lg A) with trypsin, either conducting hydrolysis of beta-lg under pressure or hydrolysing beta-lg that was previously pressure treated. Pressurisation, before or during enzyme treatments, enhanced tryptic hydrolysis of beta-lg. Trypsin degraded pressure-modified beta-lg and pressure-induced beta-lg aggregates, favouring proteolysis to the intermediate degradation products: (Val(15)-Arg(40)), (Val(41)-Lys(69))S-S(Leu(149)-Ile(162)) and (Val(41)-Lys(70))S-S(Leu(149)-Ile(162)). These were further cleaved at the later stages of proteolysis to yield: (Val(15)-Tyr(20)), (Ser(21)-Arg(40)), (Val(41)-Tyr(60)), (Trp(61)-Lys(69))S-S(Leu(149)-Ile(162)) and (Trp(61)-Lys(70))S-S(Leu(149)-Ile(162)). Particularly, in the tryptic hydrolysates of pre-pressurized beta-lg, two other fragments linked by disulphide bonds: (Lys(101)-Arg(124))S-S(Leu(149)-Ile(162)) and (Tyr(102)-Arg(124))S-S(Leu(149)-Ile(162)), were found. These corresponded to rearrangement products induced by SH/SS exchange between the free thiol group of Cys(121) and Cys(160), that normally forms the disulphide bond Cys(66)-Cys(160). In the light of these results, structural modifications of beta-lg under high pressure are discussed.     

The Employment of Reason

Rationalism in the Netherlands is characterised by pragmatism. As Charles Rattray explains it is a practical bent that was driven in the 20th century by the exigencies of building cheaply and quickly a large amount of social housing on a relatively small amount of land. It is a strand that has been underscored by a belief in reason across time and a confidence in an analytical approach. Copyright © 2007 John Wiley & Sons, Ltd.     

Topical Capsaicin in Poly(lactic-co-glycolic)acid (PLGA) Nanoparticles Decreases Acute Itch and Heat Pain

Background: Capsaicin, the hot pepper agent, produces burning followed by desensitization. To treat localized itch or pain with minimal burning, low capsaicin concentrations can be repeatedly applied. We hypothesized that alternatively controlled release of capsaicin from poly(lactic-co-glycolic acid) (PLGA) nanoparticles desensitizes superficially terminating nociceptors, reducing burning. Methods: Capsaicin-loaded PLGA nanoparticles were prepared (single-emulsion solvent evaporation) and characterized (size, morphology, capsaicin loading, encapsulation efficiency, in vitro release profile). Capsaicin-PLGA nanoparticles were applied to murine skin and evaluated in healthy human participants (n = 21) for 4 days under blinded conditions, and itch and nociceptive sensations evoked by mechanical, heat stimuli and pruritogens cowhage, β-alanine, BAM8-22 and histamine were evaluated. Results: Nanoparticles (loading: 58 µg capsaicin/mg) released in vitro 23% capsaicin within the first hour and had complete release at 72 h. In mice, 24 h post-application Capsaicin-PLGA nanoparticles penetrated the dermis and led to decreased nociceptive behavioral responses to heat and mechanical stimulation (desensitization). Application in humans produced a weak to moderate burning, dissipating after 3 h. A loss of heat pain up to 2 weeks was observed. After capsaicin nanoparticles, itch and nociceptive sensations were reduced in response to pruritogens cowhage, β-alanine or BAM8-22, but were normal to histamine. Conclusions: Capsaicin nanoparticles could be useful in reducing pain and itch associated with pruritic diseases that are histamine-independent.     

Tensile fracture behavior of notched fiber reinforced titanium metal matrix composite

The static fracture behavior of a titanium based metal matrix composite (MMC) with a central hole or a straight notch was investigated. The MMC used was SCS-6/Ti-β21-S with a quasi-isotropic lay-up. Different sizes of hole or notch were used which provided cut-out size to specimen width ratios from 0·1 to 0·4. Two test temperatures were used: ambient and 650°C. At both temperatures, the tested MMC showed a mild hole size effect or notch sensitivity. The failure mechanisms involved the debonding of fibers followed by failure of fibers, and then by failure of the matrix.     

Identification of positional isomers of lysophosphatides in butter serum

The separation of individual classes of phospholipids by two-dimensional thin layer chromatography revealed the presence of lysophosphatides (monoacyl glycerophosphoryl compounds) in minor quantities in butter serum. The naturally occurring lysophosphatidyl ethanolamine (LPE) and lysophosphatidyl choline (LPC) were prepared by the combined use of a diethylaminoethyl (DEAE) cellulose column and thin layer chromatography. Gas chromatographic analysis of methyl esters of LPE and LPC showed that both lysophosphatides contained, in addition to saturated fattya cids, considerable quantities of unsaturated fatty acids. A comparison of the fatty acid pattern of naturally occurring LPE and LPC with that of LPE and LPC prepared by phospholipase A hydrolysis of phosphatidyl ethanolamine (PE) and phosphatidyl choline (PC) suggested that both the 1-and 2-forms of positional isomers were present. Hydrolysis of naturally occurring LPE and LPC with phospholipase C, and separation of the monoglycerides formed, confirmed the occurrence of two positional isomers of lysophosphatides.     

Computer aided design and fabrication of models for in vitro studies of vascular fluid dynamics

An integrated computer aided design/computer aided manufacture system has been used to model the complex geometry of blood vessel anastomoses. Computer models are first constructed with key dimensions derived from radiological images of bypass grafts, and from casts of actual blood vessel anastomoses. Physical models are then fabricated in one of two ways: the surface geometry data can be used to control the movement of a three-axis milling machine; alternatively, the same data can be exported in a form that can be interpreted by a stereolithography apparatus. Both methods produce geometrically defined solid investments that can be used in a multistep casting process that yields high-quality physical models for vascular fluid dynamic studies. This technique is useful for parametric studies.