Dynex: multiplex ELISA technology

Conventional enzyme-linked immunosorbent assay (ELISA) is a gold standard for screening antibodies and testing for protein or antigen presence. A significant limitation of this assay resides in the fact that only one analyte can be assessed per microplate well. Here, we describe and investigate a new technology consisting of an automated ELISA system in which up to 10 analytes can be measured within one single well, thus improving productivity, accuracy, and repeatability by reducing the amount of human labor required. Another strength of the platform is that a user can load any necessary sets/subsets of beads to perform required assays, with improved flexibility compared to manufactured-loaded arrays for multiplex analysis. We also demonstrate that this system can be used to determine the pathogenicity (i.e., presence of Shiga toxins) and serotype (i.e., Escherichia coli O157) of E. coli isolates.     

Measurement of oocyte temporal maturation process by means of a simple optical micro-system

We present a simple optical micro-system used to measure the transmission spectra of oocytes in order to qualify their maturation stage. Two applications of the device are possible: (i) the evaluation of the maturation stages of oocytes, and (ii) the development of a fertilization indicator. For the first application, GV, MI and MII oocytes were also analysed. Transmission spectra allow the 3 maturation stages to be identified but cannot be used to estimate the maturity of an unknown oocyte. Oocytes are subject to continuous development. This is why spectral separation of the 3 maturation stages cannot be made although they can be visually identified. However, the visual observation remains biologist-dependent. We therefore investigated the temporal maturation evolution of the oocytes in terms of transmission spectra and probability analysis. Results show that oocytes to be fertilized should not only be chosen in the MII stage, but also at the right time during the MII stage. This particular aspect requires further investigation. However, spectral measurements could be used as a technique for monitoring the maturation evolution of the oocytes. Fertilized oocytes exhibiting fertilization abnormalities were also tested. The device proved to be an efficient fertilization indicator.     

Radio‐opaque fecal impaction and pseudo‐occlusion in a dialyzed patient taking lanthanum carbonate

Lanthanum therapy is an efficient therapy of hyperphosphoremia by chelating phosphore in the digestive tract. Lanthanum is a silvery white metallic element that belongs to group 3 of the periodic table. This drug is lightly absorbed and has low water solubility. It should be borne in mind that abdominal X‐rays of patients taking lanthanum carbonate may have a radio‐opaque appearance typical of imaging agents. This characteristic is suggested to confirm adherence of the patient by doing an abdominal X‐ray. We describe in our case a particular good compliant patient with slow digestive transit, which ends by pseudo‐occlusion.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

Zinc Dialkyl Phosphate (<Emphasis Type="Bold">ZP</Emphasis>) as an Anti-Wear Additive: Comparison with <Emphasis Type="Bold">ZDDP</Emphasis>

In this study, we are interested in the anti-wear properties of zinc dialkyl phosphate additive (ZP) in comparison with ‘classical’ zinc dialkyldithiophosphate (ZDDP). Friction tests were performed on a reciprocating tribometer using both ball-on-flat and cylinder-on-flat configurations under a Hertzian contact pressure of 0.9 GPa. Experiments were carried out as a function of temperature (25 and 100 °C), sliding speed (25, 50 and 100 mm/s) and additives concentrations. Ball wear scar diameters as well as friction coefficient were measured. In order to better understand the anti-wear mechanisms of these additives, friction tests were followed by surface analyses such as AES (Auger Electron Spectroscopy) and XPS (X-Ray Photoelectron Spectroscopy). Transmission Electron Microscopy (TEM) observations of the ZDDP and ZP tribofilms were also carried out to visualise the generated layers. The anti-wear capability of ZP molecule is discussed.     

Effect of added salt and increase in ionic strength on skim milk electroacidification performances

Bipolar-memibrane electroacidification (BMEA) technology which uses the property of bipolar membranes to split water and the demineralization action of cation-exchange membranes (CEM), was tested for the production of acid casein. BMEA has numerous advantages in comparison with conventional isoelectric precipitation processes of proteins used in the dairy industry. BMEA uses electricity to generate the desired ionic species to acidify the treated solutions. The process can be precisely controlled, as electro-acidification rate is regulated by the effective current density in the cell. Water dissociation at the bipolar membrane interface is continuous and avoids local excess of acid. In-situ generation of dangerous chemicals (acids and bases) reduces the risks associated with the handling, transportation, use and elimination of these products. The aim of this study was to evaluate the performance of BMEA in different conditions of added ionic strength (p(added) = 0, 0.25, 0.5 and 1.0 M) and added salt (CaCl2, NaCl and KCl). The combination of KCl and p(added) = 0.5 M gave the best results with a 45% decrease in energy consumption. The increased energy efficiency was the result of a decrease in the anode/cathode voltage difference. This was due to an increase of conductivity, produced by addition of salt, necessary to compensate for the lack of sufficiently mobile ions in the skim milk. However, the addition of salts, irrespective of type or ionic strength, increased the required operation time. The protein profile of isolates were similar under all experimental conditions, except at 1.0 M-CaCl2.     

Comparison of Electrochemical and Chemical Acidification of Skim Milk

The purpose of this study was to compare chemical and electrochemical acidification, in order to identify differences between the two acidification procedures. The results reveal differences in the acidification profiles obtained with the two methods. Whereas chemical acidification showed a salting‐in effect from addition of salts, bipolar‐membrane electroacidification (BMEA) removes salts through electrochemical demineralization, favoring protein precipitation. Hence, at pH 4.6, all the caseins were precipitated by BMEA, while some were not yet precipitated by chemical acidification. Nevertheless, the chemical composition and the casein fraction composition of the isolates were the same for both chemical and electrochemical acidification.     

Self‐Assembly of Atomically Thin Chiral Copper Heterostructures Templated by Black Phosphorus

The fabrication of 2D systems for electronic devices is not straightforward, with top‐down low‐yield methods often employed leading to irregular nanostructures and lower quality devices. Here, a simple and reproducible method to trigger self‐assembly of arrays of high aspect‐ratio chiral copper heterostructures templated by the structural anisotropy in black phosphorus (BP) nanosheets is presented. Using quantitative atomic resolution aberration‐corrected scanning transmission electron microscopy imaging, in situ heating transmission electron microscopy and electron energy‐loss spectroscopy arrays of heterostructures forming at speeds exceeding 100 nm s^?1 and displaying long‐range order over micrometers are observed. The controlled instigation of the self‐assembly of the Cu heterostructures embedded in BP is achieved using conventional electron beam lithography combined with site specific placement of Cu nanoparticles. Density functional theory calculations are used to investigate the atomic structure and suggest a metallic nature of the Cu heterostructures grown in BP. The findings of this new hybrid material with unique dimensionality, chirality, and metallic nature and its triggered self‐assembly open new and exciting opportunities for next generation, self‐assembling devices.     

Metal transfer to plants grown on a dredged sediment: use of radioactive isotope 203Hg and titanium

Improperly disposed of dredged sediments contaminated with metals may induce long-term leaching and an increase of metal concentrations in ground waters and vegetal cover plants. The objective of the study was to quantify the sediment-to-plant transfer of Cu, Pb, Hg and Zn with a particular focus on the pathway of Hg and to determine whether the establishment of vegetal cover modifies the metal availability. A pot experiment with rape (Brassica napus), cabbage (Brassica oleraccea) and red fescue (Festuca rubra) was set up using a sediment first spiked with the radioisotope 203Hg. Zinc concentrations (197-543 mg kg(-1) DM) in leaves were higher than Cu concentration (197-543 mg kg(-1) DM), Pb concentration (2.3-2.6 mg kg(-1) DM) and Hg concentration (0.9-1.7 mg kg(-1) DM). Leaves-to-sediment ratios decreased as follows: Zn > Cu > Hg > Pb. According to Ti measurements, metal contamination by dry deposition was less than 1%. Mercury concentration in plant leaves was higher than European and French thresholds. Foliar absorption of volatile Hg was a major pathway for Hg contamination with a root absorption of Hg higher in rape than in cabbage and red fescue. Growth of each species increased Cu solubility. Zinc solubility was increased only in the presence of rape. The highest increase of Cu solubility was observed for red fescue whereas this species largely decreased Zn solubility. Dissolved organic carbon (DOC) measurements suggested that Cu solubilisation could result from organic matter or release of natural plant exudates. Dissolved inorganic carbon (DIC) measures suggested that the high Zn solubility in the presence of rape could originate from a generation of acidity in rape rhizosphere and a subsequent dissolution of calcium carbonates. Consequently, emission of volatile Hg from contaminated dredged sediments and also the potential increase of metal solubility by a vegetal cover of grass when used in phytostabilisation must be taken into account by decision makers.