Influence diagnostics in multiple discriminant analysis

Various influence diagnostics in Multiple Discriminant Analysis can be found in the literature. Almost all of them are based on the overall probability of misclassification. Two case-deletion diagnostics which evaluate the effect of the omission on the linear functions which determine Fisher’s Linear Discriminant Rule are proposed in this paper. Both measures are based on the L ₂-norm: The first diagnostic is calculated from the data set and the second diagnostic is calculated in the minimum hypercube which covers it.     

Diffusion bonding of an aluminium-lithium alloy (AA8090) using aluminium-copper alloy interlayers

Diffusion bonds have been produced between sheets of an Al-Li-Cu-Mg-Zr alloy using aluminium-4% copper vapour deposited metallic interlayers. Microstructural changes occurred both in the parent alloy and in the bond interface after diffusion bonding cycles and post-bonding heat treatments were analysed. Different metallographic techniques (light microscopy, scanning and transmission electron microscopy) have been used. Diffusion bonding trials were carried out using the same alloy (AA8090), both in non-superplastic (T6) and superplastic conditions. Differences in their behaviours in relation to diffusion bonding were observed.     

Scientific and technological performance evaluation of the Spanish Council for Scientific Research (CSIC) in the field of Biotechnology

An evaluation of the Spanish CSIC performance in Biotechnology, as compared with those of the French CNRS and the Italian CNR, has been carried out to determine the balance between the generation of scientific knowledge and the transfer of technology. This study shows a high scientific productivity mostly in journals with moderate impact factor, a low generation of patents and an insufficient transfer of knowledge to the Spanish companies. Other indicators confirm the existence of competitive human resources in biotechnological research producing scientific knowledge of interest for the development of patents and that cooperates successfully at European level.     

Influence of Manufacturing and Ripening Conditions on the Survival of Enterobacteriaceae in Manchego Cheese

The effects of cooking temperature, time and temperature of brine-salting, and temperature of ripening on the behavior of Enterobacteriaceae in Manchego cheese were studied. Fifty lots of cheese from raw ewe's milk manufactured and ripened under different conditions were investigated throughout a 60-day ripening period. Differences in pH values due to temperature-dependent whey retention accounted for the effect of cooking temperature on coliform and fecal coliform counts. Temperature of brine-salting had no effect on Enterobacteriaceae counts, but a significant effect of salting time on Enterobacteriaceae and fecal coliform counts was detected. Ripening temperature was the manufacturing variable with greatest influence (P<.01) on Enterobacteriaceae and coliform counts during the whole curing period.     

Specific consumption of liquid biofuels in gasoline fuelled engines

Oxygenated fuels increase fuel consumption due to their low enthalpy of combustion; however, their high antiknock index renders them suitable for use in engines with a high compression rate, increasing their thermal yield. This study evaluated the performance of biorenewable oxygenated fuels (ethanol and isoamyl alcohol) and partially renewable fuels (ETBE: ethyl tert-butyl ether, TAEE: tert-amyl ethyl ether and di-TAE: di-tert-amyl ether) with high degree of purity and in mixtures with automotive gasoline, based on tests with Otto cycle engines. Among the oxygenated fuels evaluated here, di-TAE was found to present the best characteristics of performance, both individually and in mixtures with gasoline.     

Nonisothermal melt-crystallization kinetics of isotactic polypropylene synthesized with a metallocene catalyst and compounded with different quantities of an α nucleator

The nonisothermal crystallization kinetics of a metallocene-made isotactic polypropylene (m-iPP) and its compounds with 0.1 wt % and 0.3 wt % of a sorbitol derivative [1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS); an α nucleator] were investigated by differential scanning calorimetry at different cooling rates from the melt. The nucleation efficiency was proved by a significant increase in the crystallization temperatures (accompanied by a slight augmentation of the degree of crystallinity and a decrease in the crystal sizes). This increase in the crystallization temperatures led to higher amounts of fractional content in the γ polymorph, even though DMDBS was supposed to be a nucleator for the α form. The Avrami and Ozawa methods effectively described only the early stage of crystallization, whereas a combined Avrami–Ozawa method was valid for the whole crystallization process. The values of the exponent for this method decreased for nucleated samples in the later stage of crystallization, especially in the case of m-iPP with 0.3 wt % DMDBS added (m-iPP03). The activation energy of the process and the surface free energy were also estimated. The production of considerable proportions of the γ polymorph in m-iPP03 corresponded to higher values of the activation energy and lower values of the surface free energy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Faculty and Student Attitudes Toward Community Service: A Comparative Analysis

The Humanitarian Engineering initiative, sponsored by the William and Flora Hewlett Foundation, at the Colorado School of Mines, is creating a program that will support engineering students in understanding their responsibility for solving community development problems that exist throughout the world. As part of this effort, data has been collected on faculty and student attitudes using the ‘Community Service Attitudes Scale,” developed and validated by Shiarella, McCarthy, and Tucker. During the fall 2004, 78 students and 34 faculty members responded to this instrument. Statistically significant differences were found between the attitudes of students and faculty, males and females, and among different age groupings with respect to service activities. A general finding was that faculty displayed better attitudes toward community service than the students.     

Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods

This article presents the first application of the Finite Calculus (FIC) in a Ritz-FEM variational framework. FIC provides a steplength parametrization of mesh dimensions, which is used to modify the shape functions. This approach is applied to the FEM discretization of the steady-state, one-dimensional, diffusion–absorption and Helmholtz equations. Parametrized linear shape functions are directly inserted into a FIC functional. The resulting Ritz-FIC equations are symmetric and carry a element-level free parameter coming from the function modification process. Both constant- and variable-coefficient cases are studied. It is shown that the parameter can be used to produce nodally exact solutions for the constant coefficient case. The optimal value is found by matching the finite-order modified differential equation (FOMoDE) of the Ritz-FIC equations with the original field equation. The inclusion of the Ritz-FIC models in the context of templates is examined. This inclusion shows that there is an infinite number of nodally exact models for the constant coefficient case. The ingredients of these methods (FIC, Ritz, MoDE and templates) can be extended to multiple dimensions