Three ways to implement interfacial techniques: application tomeasurements of chromatic dispersion, birefringence, and nonlinearsusceptibilities

Depending on the spectal width of the source illuminating an interferometer, measurement procedures can utilize either the whole interferogram, or only the fringe envelope, or only the fringe quick oscillations. With an ultraband spectrum source, a simplified adaptation of the methods of Fourier transform spectroscopy yields the variations of the test-fiber propagation constant over the whole wavelength-interval of the source. Chromatic dispersion can then be computed from a single interferogram. With narrower spectrum sources, only the fringe envelopes are utilized and yield measurements of mode delay, with application to chromatic and polarization mode dispersion. In this case, however, interferograms at several wavelengths are necessary. With even narrower spectrum sources, the fringe quick oscillations provide measurements of phase shifts, related to changes in the mode propagation constant, when outside perturbations are applied to the test fiber. A direct method for measuring the third-order nonlinear susceptibilities is discussed. In this case the outside perturbation is an intense pump laser field     

Modeling alternative zoning strategies in forest management

To satisfy public demands for environmental values, forest companies are facing the prospect of a reduction in wood supply and increases in costs. Some Canadian provincial governments have proposed intensifying silviculture in special zones dedicated to timber production as the means for pushing out the forest possibility frontiers. In this paper, we compare the traditional two‐zone land allocation framework which includes ecological reserves and integrated forest management zones with the triad — a three‐zone scheme which adds a zone dedicated to intensive timber production. We compare the solutions of the mixed‐integer linear programs formulated under both land‐allocation frameworks. We explore through sensitivity analysis the conditions under which the triad regime can offset the impact on timber production from increased environmental demands. We show that under the realistic conditions characteristic to Coastal British Columbia, higher environmental demands may be satisfied under the triad regime without increasing the financial burdens on the industry or reducing its wood supply. This occurs, however, only if regulatory constraints in timber production zone are flexible.     

Allelopathic effect of phenolic acids from humic solutions on two spruce mycorrhizal fungi:Cenococcum graniforme andLaccaria laccata

The aim of this investigation was to determine the impact ofp-hydroxyacetophenone,p-hydroxybenzoic acid, catechol, and protocatechuic acid on respiration of two spruce mycorrhizal fungi:Laccaria laccata andCenococcum graniforme. These phenols are produced byVaccinium myrtillus,Athyrium filixfemina, andPicea abies, predominant species of spruce forests in the Alps, and they are also present in humic solutions at 10^–10 M or 10^–5 M. Respiration of the two fungi was inhibited by the four phenolic acids, even at concentrations ranging from 10^–5 M to 10^–7 M. These data show phenolic acids from humic solutions have biological activity at extremely low concentrations, suggesting a contribution ofV. myrtillus, A. filixfemina, andP. abies to allelopathic inhibition of mycorrhizal fungi.     

Polymer aqueous solutions as quenching media. II. Ethylene oxide–propylene oxide copolymers

The cooling power of aqueous solutions of ethylene oxide-propylene oxide copolymers are studied with a silver standard sample by using two apparatuses quench with injection and quench with agitation. For temperature T>400°C, the viscosity plays the predominant role; for T<400°C, the cooling is controlled by the polymer precipitation and the cooling rate decreases by lowering the cloud point of the polymer solution. This work demonstrates the possibility of adjusting the cooling curves by taking into account the thermodynamical properties of the polymer.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.     

A Model of Weekly Labor Participation for a Belgian Synthetic Population

This paper presents a model of labor participation calibrated on a weekly basis; part-time and full-time employments are also considered. By applying the theory of random utility maximization we model households’ choices. In order to have a good temporal and spatial coverage the model is calibrated on three datasets, extracted from both national and regional travel surveys. The results are applied to synthetic households that reproduce the Belgian population. The proposed innovative methodology simulates synthetic agents by accounting both for households’ and individuals’ characteristics, while not suffering from the problem of the “zero cell value”. The results indicate that there is major day-to-day variability in working activity participation; in particular, on Wednesdays and Fridays the number of households working part-time or not working is particularly high. This is consistent with what was expected by the analysts. Working participation is a fundamental component in activity based models where work is considered a skeletal activity. The tools developed here can be useful to study how changes in population characteristics (i.e. increases of flexible working arrangements and of the number of women in the work force) affect activity participation and travel patterns.     

The correlation between the thermoelectric properties and stoichiometry in the boron carbide phase B4C-B10.5C

Electrical conductivity, thermoelectrical power and thermal conductivity measurements on boron carbide samples show that the electrical conductivity follows the small polaron hopping theory and that thermal conductivity occurs by phonon diffusion. The evolution of these properties with carbon content illustrates the particular role played by the 13.3 at% C compound in the phase homogeneity range B_10.5C to B₄C. The value of the figure of merit (0.85×10^–3 K at 1250 K) proves that this particular boron carbide compound could be a very interesting candidate material for high-temperature thermoelectrical conversion.     

RF MEMS continuous reversible variable inductor based on a microfluidic network

In this work, RF MEMS continuous reversible variable inductor has been fabricated by using microelectronic technology and lamination process. We review, evaluate and compare this variable inductor with other work. The proposed inductor is a dual circular coil and has an inductance of few nH. The fundamental idea is to place a liquid droplet between the metal turns of a coil in order to modify the capacitive/resistive coupling between metal tracks and hence to change the stored magnetic energy. The SU-8 resin was used to realize the microfluidic channels and Au as metallic tracks. To prove the reversibility of the inductor, two cases were studied: filling and emptying of channels. The tuning range of the inductance is approximately 107 % at 1.6 GHz, making these devices very suitable as building blocks in many RF applications.     

A single phase model of mechanisms effecting miscible surfactant oil recovery

The concept of volume averaging is used to theoretically study the mechanisms of mass dispersion, adsorption, and dead-space volume. These mechanisms are important to the understanding of miscible surfactant flooding. After simpiffication based on order-of-magnitude scaling, a linear core model is solved using state variable finite-difference techniques. Mass dispersion and adsorption are shown to be important model parameters while dead-space volume is a rather insensitive model parameter.