A novel low complexity data demodulation algorithm for pulse position modulation

In this paper, a low complexity data demodulation algorithm is proposed that requires time of arrival information of the received signal exclusively. As an application example, the algorithm is applied to an ultra-wideband impulse radio communication system with pulse position modulation. The algorithm is insensitive to a common time delay for all pulses, that means, it does not require an accurate synchronization between the transmitter and the receiver. For the performance estimation, only a symbol synchronization is assumed, i.e., that there is a priori knowledge which pulse marks the beginning of a received data symbol. The performance of the proposed algorithm is evaluated for straightforward time of arrivals estimators, such as a maximum detector or a threshold detector. It is shown that the proposed algorithm outperforms a least squares algorithm in all considered scenarios. In particular, an increased robustness against additive white Gaussian noise, impulse like noise, and multiuser interference is demonstrated as well as an improved performance for multipath propagation channels.     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Automatisches Sicherheitstesten

Moderne Testgeneratoren finden Schwachstellen in Eingabeschnittstellen von Programmen, indem sie in Sekunden tausende Eingaben zufällig erzeugen. Die Werkzeuge lassen sich leicht von jedermann einsetzen–zum Angriff oder zur Verteidigung.     

About the origins of residual stresses in <Emphasis Type="Italic">in situ</Emphasis> consolidated thermoplastic composite rings

In a context of cost reduction, in situ filament winding of thermoplastic matrix composites becomes an appealing process. As residual stresses could considerably affect the produced part, models were proposed to predict process-induced residual stresses. After developing a validated thermal model of the process, mainly three different aspects are here addressed: the continuous bonding occurring during the process, the effect of the processed layer on the structure, and the effect of the curvature of the mandrel. While stresses coming from the continuous bonding appeared to be negligible, consequent levels of stresses can be achieved due to an iterative compression of the structure by the tow (supposed to be under tension). The mandrel properties and the tow tension profile followed during winding are essential parameters that might induce several different stress states. A comparison between measured and computed end-to-end openings of split rings illustrates the accuracy of the proposed models.     

Prospects of Supercritical Fluids in Realizing Graphene‐Based Functional Materials

Supercritical‐fluids science and technology predate all the approaches that are currently established for graphene production by several decades in advanced materials design. However, it has only recently been proposed as a plausible approach for graphene processing. Since then, supercritical fluids have emerged into contention as an alternative to existing technologies because of their scalability and versatility in processing graphene materials, which include composites, aerogels, and foams. Here, an overview is presented of such materials prepared through supercritical fluids from an advanced materials science standpoint, with a discussion on their fundamental properties and technological applications. The benefits of supercritical‐fluid processing over conventional liquid‐phase processing are presented. The benefits include not only better performances for advanced applications but also environmental issues associated with the synthesis process. Nevertheless, the limitations of supercritical‐fluid processing are also stressed, along with challenges that are still faced toward the achievement of the great expectations from graphene materials.     

Design and Configuration Rationales for Digital Video Storage and Delivery Systems

Recent advances in computing technology have brought multimedia information processing to prominence. The ability to digitize, store, retrieve, process, and transport analog information in digital form has changed the dimensions of information handling. Several architectural and network configurations have been proposed for efficient and reliable digital video delivery systems. However, these proposals succeed only in addressing subsets of the whole problem. In this paper, we discuss the characteristics of video services. These include Cable Television, Pay-Per-View, and Video Repository Centers. We also discuss requirements for Video On Demand services. With respect to these video services, we analyze two important video properties: image quality and response time. We discuss and present configurations of a Digital Video Delivery System (DVDS) from three general system components - servers, clients, and connectivities. Pertinent issues in developing each component are also analyzed. We also present an architecture of a DVDS that can support the various functionalities that exist in the various video services. Lastly, we discuss data allocation strategies which impact performance of interactive video on demand (IVOD). We present preliminary results from a study using a limited form of mirroring to support high performance IVOD.     

A co-classification approach to learning from multilingual corpora

We address the problem of learning text categorization from a corpus of multilingual documents. We propose a multiview learning, co-regularization approach, in which we consider each language as a separate source, and minimize a joint loss that combines monolingual classification losses in each language while ensuring consistency of the categorization across languages. We derive training algorithms for logistic regression and boosting, and show that the resulting categorizers outperform models trained independently on each language, and even, most of the times, models trained on the joint bilingual data. Experiments are carried out on a multilingual extension of the RCV2 corpus, which is available for benchmarking.     

Haar invariant signatures and spatial recognition using omnidirectional visual information only

This paper describes a method for spatial representation, place recognition and qualitative self-localization in dynamic indoor environments, based on omnidirectional images. This is a difficult problem because of the perceptual ambiguity of the acquired images, and their weak robustness to noise, geometrical and photometric variations of real world scenes. The spatial representation is built up invariant signatures using Invariance Theory where we suggest to adapt Haar invariant integrals to the particular geometry and image transformations of catadioptric omnidirectional sensors. It follows that combining simple image features in a process of integration over visual transformations and robot motion, can build discriminant percepts about robot spatial locations. We further analyze the invariance properties of the signatures and the apparent relation between their similarity measures and metric distances. The invariance properties of the signatures can be adapted to infer a hierarchical process, from global room recognition to local and coarse robot localization.     

Towards online and personalized daily activity recognition,habit modeling,and anomaly detection for the solitary elderly through unobtrusive sensing

Multimedia Tools and Applications - Rapid population aging and advances in sensing technologies motivate the development of unobtrusive healthcare systems, designed to unobtrusively collect an...     

Transfer of learning in virtual environments: a new challenge?

The aim of all education is to apply what we learn in different contexts and to recognise and extend this learning to new situations. Virtual learning environments can be used to build skills. Recent research in cognitive psychology and education has shown that acquisitions are linked to the initial context. This provides a challenge for virtual reality in education or training. A brief overview of transfer issues highlights five main ideas: (1) the type of transfer enables the virtual environment (VE) to be classified according to what is learned; (2) the transfer process can create conditions within the VE to facilitate transfer of learning; (3) specific features of VR must match and comply with transfer of learning; (4) transfer can be used to assess a VE’s effectiveness; and (5) future research on transfer of learning must examine the singular context of learning. This paper discusses how new perspectives in cognitive psychology influence and promote transfer of learning through the use of VEs.