Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

PCI-Express与ASI：避免在2Gbps速率上的混乱

在高达每路2Gbps的数据速率上，几乎没有什么技术能使信号完整性有很大的不同。哪种技术能真正提高性能？或者是只能使性能更差？专家们意见不一。     

月桂醇聚氧乙烯醚硝酸酯助燃降污性能的研究

通过柴油发动机台架试验证明 ,月桂醇聚氧乙烯醚硝酸酯用作柴油添加剂 ,既可提高柴油的燃烧性能 ,又可降低排放尾气中的一氧化碳 (CO)、未燃碳氢化合物 (HC)、氮氧化物 (NOx)含量及烟度等多种功能 ,是一种良好的多功能柴油助燃消烟添加剂。     

铣制三元流叶轮时产生误差的原因分析及解决方法

对在五坐标数控加工中心上铣制三元流叶轮时出现的叶轮附面尺寸误差问题，进行了详细分析，并提出了问题的解决方法，有效地避免了加工中产生的超差。     

（E）-2-壬烯酸合成方法的改进

(E)-2-壬烯酸是有机合成的一种重要中间体,我们利用Knoevenagel反应机理,改进了(E)-2-壬烯酸的合成工艺,在不使用脱水剂条件下,使用少量吡啶作催化剂,获得了83%的反应收率。     

Experimental Study of Ice Jam Thickening under Dynamic Flow Conditions

River ice jams are a common occurrence on northern rivers, and their formation can present a severe flood risk to nearby communities. As more and more river regulation projects are developed to provide an alternative to fossil fuels for electrical power-generating capacity, our need to understand the mechanisms associated with ice jam formation under variable flow conditions becomes more vital. This is because, at present, hydropeaking operations are often severely curtailed during the ice-affected seasons due to concerns that sudden flow fluctuations might instigate ice jams and associated flooding. Here, an experimental investigation explores the effects of rapid increases in discharge on ice jam formation and evolution. It is found that the thickness of ice jams formed under highly dynamic flow conditions tend to be slightly thinner than those formed during steady carrier flows for comparable discharges. Also, despite the highly dynamic nature of these consolidation events, the resulting ice thicknesses appear reasonably well approximated by steady flow theory.     

Mobile robot path planning based on hierarchical hexagonal decomposition and artificial potential fields

In this article, a new algorithm based on an artificial potential field and hierarchical cell decomposition technique is developed to solve the find-path problem for a mobile robot. The complete map of the workspace including obstacle locations is assumed to be known a priori. The basic cell structure used for decomposition is a hexagon. The artificial potential field is based on an attractive force from the goal position and repelling forces from the obstacles. Computer simulations of the algorithm for various obstacle scenarios are also presented. © 1994 John Wiley & Sons, Inc.     

Chemical mechanical polishing of polymer films

Strategies to reduce capacitance effects associated with shrinking integrated circuit (IC) design rules include incorporating low resistivity metals and insulators with low dielectric values, or “low-κ” materials. Using such materials in current IC fabrication schemes necessitates the development of reliable chemical mechanical polishing (CMP) processes and process consumables tailored for them. Here we present results of CMP experiments performed on FLARE™ 2.0 using a specialized zirconium oxide (ZrO₂) polishing slurry. FLARE™ 2.0 is a poly(arylene) ether from AlliedSignal, Inc. with a nominal dielectric constant of 2.8. In addition, we provide insight into possible removal mechanisms during the CMP of organic polymers by examining the performance of numerous abrasive slurries. Although specific to a limited number of polymers, the authors suggest that the information presented in this paper is relevant to the CMP performance of many polymer dielectric materials.     

Biochemical alterations of the tunica albuginea in impotence

PURPOSE: The objectives of this study were to quantify the immunohistochemical stainings of collagen types I, III and IV, and investigate the value of glycohistochemical staining with 3 lectin types specific to a particular glycan structure, Arachis hypogaea, Triticum vulgare and concanavalin A, as a method of defining possible changes in the collagen structure of the tunica albuginea in potent and impotent patients. MATERIALS AND METHODS: The study involved 4 normal men, 4 with pure venous leakage and 4 with pure arterial disease. Collagen types I, III and IV, and lectins Arachis hypogaea, Triticum vulgare and concanavalin A were studied using a cell image processor. The labeling index relates to the percentage of staining and mean optical density relates to the staining intensity. RESULTS: Mean labeling index values for the 3 types of collagen and lectins were similar (p > 0.05). Mean optical density value relating to collagen type I was significantly higher in the arteriogenic group than in the other groups (p < 0.05), while mean optical density value of collagen type IV was significantly higher in the venogenic group than in the 2 other groups (p < 0.05). Mean optical density values relating to the 3 lectin types were similar in the 3 clinical groups (p > 0.05). CONCLUSIONS: An alteration in the distribution and structure of the various collagen types and lectins in the tunica albuginea of impotent patients has been shown that may interfere with normal function and lead to impotence.     

Reliability and performance analysis of time – space – time switching networks with multiple separated space switches

Since electronic switching systems usually require very strict reliability requirements as well as good performance objectives, we need to jointly analyse the performance and reliability of switching systems. In this paper, we compare conventional time–space–time switches with single space switches with those with multiple separated space switches, from the viewpoints of reliability and performance. We consider time–space–time switching networks which consist of N incoming time switches, i.e. one NxN space switch, two (N/2)x(N/2) space switches, and four (N/4)x(N/4) space switches. We introduce a Markov reliability model to study the effect of failures and analyse the reliability and performance of three different types of switching networks in terms of average blocking probability and the mean time to unreliable operation, as we vary the offered traffic. As a result, T–S–T switching networks with multiple separated space switches exhibit better performance and reliability than those with single space switches.