Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

An adaptive learning approach for 3-D surface reconstruction from point clouds.

In this paper, we propose a multiresolution approach for surface reconstruction from clouds of unorganized points representing an object surface in 3-D space. The proposed method uses a set of mesh operators and simple rules for selective mesh refinement, with a strategy based on Kohonen's self-organizing map (SOM). Basically, a self-adaptive scheme is used for iteratively moving vertices of an initial simple mesh in the direction of the set of points, ideally the object boundary. Successive refinement and motion of vertices are applied leading to a more detailed surface, in a multiresolution, iterative scheme. Reconstruction was experimented on with several point sets, including different shapes and sizes. Results show generated meshes very close to object final shapes. We include measures of performance and discuss robustness.     

Characterization of Carbonated Beverages Associated to Corrosion of Aluminium Packaging

The objectives of this study were to evaluate the characteristics of commercial soft drinks related with the corrosion process of the aluminium packaging and based on that, propose model solutions for future studies of beverage/package interaction and corrosion process of metal packages. Therefore, the pH, acidity, concentration of chlorides and copper in six types of soft drinks were determined, as well as the corrosion potential of the aluminium and the current density corrosion obtained in polarization curves using the beverages as electrolyte. Based on the results obtained, a solution of citric acid (pH = 3) containing chloride (250 mg/kg) and copper ions (250 µg/kg) is proposed. The obtained results are potentially useful for the industry and future studies regarding the interaction process between soft drinks and aluminium cans. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of Can Microseam Resistance when Submitted to Mechanical Abuse

Microseaming is a significant technological development in the can manufacturing process that has been employed in the packaging of tomato processed products in Brazil. It was developed by the Brazilian company Grupo Kramer in 1990. Due to its reduced dimensions in relation to the traditional can closing system, i.e. the conventional double seam, microseam mechanical resistance as well as its capability to guarantee package integrity when submitted to processing and distribution remain questionable. In this study microseam resistance was compared to conventional double seam resistance when submitted to mechanical abuse through a standardized impact on the seam region positioned at angles of 45 and 67°. As evaluation parameters of closing integrity loss after impact swelling resulting from the cans external contact with a bacterial suspension, internal vacuum loss and can centre depth changes were used. The microseam presented a performance comparable to the conventional double seam for the impact at 45°, whereas at 67° its performance was found to be superior. This superior microseam performance can be credited to its being more malleable, i.e., to its greater capability of deforming itself when submitted to a puncture-type impact, to its more compact structure and to the type of deformation resulting from this type of impact.     

Physical properties of spray dried acerola pomace extract as affected by temperature and drying aids

The objective of this study was to assess the impact of some processing parameters on moisture content, flowability, hygroscopicity and water solubility of spray dried acerola pomace extract using maltodextrin and cashew tree gum as drying aids. The experiment was conducted according to Response Surface Methodology, with the independent variables being: inlet temperature (170-200 °C), drying aid/acerola ratio (2:1-5:1), and percent replacement of maltodextrin by cashew tree gum (0-100%). Higher inlet temperatures favored the desired physical properties of the powders, decreasing their moisture contents and hygroscopicity, and increasing flowability. The drying aids decreased the powder hygroscopicity, especially cashew tree gum (CTG), which also enhanced the powder flowability. The best processing conditions to obtain a free-flowing and least hygroscopic acerola pomace extract powder by spray drying were: inlet temperature above 194 °C; drying aid/acerola solid ratio, 4:1; percent replacement of maltodextrin by CTG, at least 80%.     

Failure analysis case study on a Cu/low-k technology in package: New front-side approach using laser and plasma de-processing

Because of its advantages (reduction of thickness, improvement of the signal delay and of the thermal dissipation…), Cu/low-k technologies are more and more used for RF applications in semiconductor industry. The failure analysis of such devices becomes a new challenge. This paper deals with a failure analysis case study on copper and low-k dielectric structure encapsulated in a plastic package. It shows the limitations of the techniques used in a standard failure analysis flow and presents a new sample preparation combining laser package ablation and specific RIE process for front-side decapsulation. This innovative sample preparation flow has been found mandatory for solving the failure analysis case: it was demonstrated that there was not any defect at the surface of the die and this method enabled the access to an EOS defect located between two metal layers.     

Effect of Solvent Content on the Separation and the Energy Consumption of Extractive Distillation Columns

This article sets out to evaluate the effect of solvent content in the extractive section on the separation efficiency and energy consumption of extractive distillation columns. Contrary to the classical approach, the proposed approach enables a simultaneous evaluation of the effect of the major decision variables (reflux ratio, solvent flow rate, and the number of stages of the extractive section [NSE]). The procedure allows calculating the minimum solvent flow rate for the separation and the minimum specific energy consumption. The results show that the minimum specific energy consumption is obtained for the minimum reflux ratio and not for the minimum solvent flow rate. Moreover, the results show that it is not always the case that a larger NSE results in lower energy consumption. Due to its industrial importance, the dehydration of aqueous mixtures of ethanol using ethylene glycol as solvent has been chosen as a case study.     

N-acryloxysuccinimide: Synthesis, characterization, and incorporation in dental adhesives

In an attempt to enrich the world of dentistry through the development of new materials, this study proposes to synthesize and incorporate a monomer containing the N-hydroxysuccinimide (NHS) ester reactive group to a dental adhesive. As such, this study developed a simple method to obtain NHS esters by employing acrylic acid (AA) and NHS in the presence of EDC (N-ethyl-N′-(3-dimethylaminopropyl)carbodiimide), from an aprotic medium. The experimental N-acryloxysuccinimide (NSA) monomer was analyzed by infrared spectroscopy (FTIR) and nuclear magnetic resonance of hydrogen (¹H NMR). This monomer was then incorporated within a prepared dental adhesive, in a 5% proportion. The modified adhesive, containing NSA, was applied to the dental surface of bovine teeth to obtain an adhesive/dentin interface in vitro. The characterization of this interface by Raman spectroscopy presented the formation of new amide bonds. Moreover, through scanning electron microscopy (SEM), it became possible to observe an intense penetration of this modified adhesive on the dental surface. Considering the outcome, it can be concluded that the synthesized NSA monomer provided a favorable condition for the dental adhesives to interact chemically with the dentin collagen fibers.