Effect of partial replacement of geopolymer binder materials on the fresh and mechanical properties: A review

The growth of demand for concrete raises concerns about the consumption of natural resources and ordinary Portland cement. Geopolymer composites show promise as a sustainable alternative for conventional cement concrete. Considering the wide range of potential geopolymer composites applications (including suitability for transportation infrastructure, underwater applications, repair and rehabilitation of structures as well as recent developments in 3D printing), the desired fresh and mechanical properties of the geopolymer composite may vary between applications: for example, rapid setting can be a merit for certain applications and a demerit for others. Therefore, the desired fresh and mechanical properties (e.g., workability, setting time, compressive strength, etc.) can be controlled for a given geopolymer source material through its partial substitution by natural or by-product materials. Recognizing the critical role of various replacement materials in enhancing the potential applications of geopolymer composites, the present review was undertaken to quantify and understand the effect of partial replacement by fly ash, metakaolin, kaolin, red mud, slag, ordinary Portland cement, and silica fume on the setting time, workability, compressive strength and flexural strength of various source materials addressed in the literature. The review also provides insights into research gaps in the field to promote future research.     

The multi-effect boiling desalting system and its comparison with the multi-stage flash system

The basic characteristics of the multi-effect boiling (MEB) desalination system are presented. Recent developments are considered, and a thermodynamic analysis and evaluation of the heat transfer areas required for the MEB system are given. In comparing the heat transfer areas, water pretreatment and salt concentration, pumping power requirement and stability of the MEB and multi-stage flash (MSF) systems, MEB seems to have definite advantages over MSF. However, in the absence of well-proven large capacity MEB units, and in view of the good experience with and reliability of MSF systems, large producers of desalted water favor continued installation of MSF systems.     

Cyclostationary crosstalk suppression by decision feedbackequalization on digital subscriber loops

Interference from digital signals in multipair cables has been shown to be cyclostationary under some conditions. This work evaluates the performance of a decision feedback equalizer (DFE) in the presence of cyclostationary interference (CI), intersymbol interference (ISI), and additive white noise (AWN). A comparison between a DFE with CI and one with stationary interference (SI) shows the ability of the DFE to substantially suppress CI. Fractionally spaced and symbol-rate DFE equalizers are also compared and the former is found to yield better performance, especially in the presence of CI. The use of a symbol-rate DFE using an adaptive timing technique that finds the receiver's best sampling phase is proposed for when the fractionally spaced DFE cannot be used because of its complexity. The results also demonstrate the potential benefits of synchronizing central office transmitter clocks, if a fractionally spaced DFE is used at the receiver     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The Bivariate Transmuted Family of Distributions: Theory and Applications

The bivariate distributions are useful in simultaneous modeling of two random variables. These distributions provide a way to model models. The bivariate families of distributions are not much widely explored and in this article a new family of bivariate distributions is proposed. The new family will extend the univariate transmuted family of distributions and will be helpful in modeling complex joint phenomenon. Statistical properties of the new family of distributions are explored which include marginal and conditional distributions, conditional moments, product and ratio moments, bivariate reliability and bivariate hazard rate functions. The maximum likelihood estimation (MLE) for parameters of the family is also carried out. The proposed bivariate family of distributions is studied for the Weibull baseline distributions giving rise to bivariate transmuted Weibull (BTW) distribution. The new bivariate transmuted Weibull distribution is explored in detail. Statistical properties of the new BTW distribution are studied which include the marginal and conditional distributions, product, ratio and conditional momenst. The hazard rate function of the BTW distribution is obtained. Parameter estimation of the BTW distribution is also done. Finally, real data application of the BTW distribution is given. It is observed that the proposed BTW distribution is a suitable fit for the data used.     

Anomaly detection via a combination model in time series data

Since the time series data have the characteristics of a large amount of data and non-stationarity, we usually cannot obtain a satisfactory result by a single-model-based method to detect anomalies in time series data. To overcome this problem, in this paper, a combination-model-based approach is proposed by combining a similarity-measurement-based method and a model-based method for anomaly detection. First, the process of data representation is performed to generate a new data form to arrive at the purpose of reducing data volume. Furthermore, due to the anomalies being generally caused by changes in amplitude and shape, we take both the original time series data and their amplitude change data into consideration of the process of data representation to capture the shape and morphological features. Then, the results of data representation are employed to establish a model for anomaly detection. Compared with the state-of-the-art methods, experimental studies on a large number of datasets show that the proposed method can significantly improve the performance of anomaly detection with higher data anomaly resolution.

     

The Valve Metal Character of Zirconium as inferred from anode potential measurements in mineral acid solutions

A study on the value metal character of Zr in 0.1 M solutions of H₂SO₄, HNO₃, and H₃PO₄ has been performed using the anode potential as the primary variable in galvanostatic, potentiostatic, and capacity measurements. A method of surface pre-treatment, which suppresses both O₂ evolution and metal dissolution, has been described. Kinetic parameters of oxide growth have been calculated. The results indicate that:

• (i) the high field approximation is applicable following an exponential law, and
• (ii) the height and activation distance of the energy barrier for ion transport through the oxide phase (Verwey model) are the same three acids.

Measurements have been also made on the dielectric breakdown of oxide, and this occurs at potentials above 200 V. Direct capacity measurements give similar results as those based on reciprocal capacity calculated from galvanostatic experiments. It is concluded that the dominant anodic oxide species is ZrO₂ having a dielectric constant of 25. Open circuit potential measurements show that Zr is spontaneously oxidized in the three acids.     

Bile acid metabolism in mammals: VI. Effect of ethionine upon bile acids of rat bile

Sex differences in the effect of ethionine upon rat liver metabolism prompted our investigation into possible sex differences in the effect of ethionine upon bile acid metabolism. The bile ducts of 24 rats, 12 male and 12 female, were cannulated. After 1 hr of bile collection, 6 rats of each sex were given ethionine, 1 mg/g body wt, by feeding tube. The bile acid composition of the bile collected during the subsequent 4 hr was analyzed by combined thin layer and gas chromatography. Ethionine induced a reduction in bile flow (3rd and 4th hr) and in bile acid concentration (4th hr) in female rats. The amino acid had no effect upon bile flow but did increase biliary secretion of bile acids (1st and 2nd hr) in male rats. Cholic acid accounted for the bulk of the reduction in total bile acid secretion in the female studies. The increase in total bile acid secretion in the male studies involved all bile acids. The effects of ethionine upon bile acid secretion were delayed in the female studies, immediate in the male. The changes in bile acid secretion involved only the taurine conjugates in the female studies, both taurine and glycine conjugates in the male. There are substantial sex differences in the effect of ethionine upon bile acid metabolism in the rat.