The ultrasound appearances of neonatal renal vein thrombosis

Renal vein thrombosis (RVT) is the most frequently occurring vascular condition in the new-born kidney. The predisposing factors include dehydration, sepsis, birth asphyxia, maternal diabetes, polycythaemia and the presence of an indwelling umbilical venous catheter. (RVT) may present clinically with a flank mass, haematuria, hypertension or renal failure. Many imaging modalities have been employed, but ultrasound is the technique most commonly used in the evaluation of neonates with suspected RVT. Thrombosis commences in the small renal veins and subsequently propagates via larger interlobar veins to the main renal vein and inferior vena cava (IVC). The ultrasound appearances depend upon the stage at which the examination is performed and extent of the thrombus. Initially, the interlobular and interlobar thrombus appears as highly echogenic streaks. These streaks commence in a peripheral, focal segment of the involved kidney and only persist for a few days. In the first week the affected kidney swells and becomes echogenic with prominent echopoor medullary pyramids. Later, the swelling increases and the kidney becomes heterogenous with loss of corticomedullary differentiation. Grey scale ultrasound readily demonstrates thrombus within the renal vein and IVC. Adrenal haemorrhage is a recognized association and may be identified ultrasonically. Colour Doppler scanning provides additional information. In the early stages of RVT, colour Doppler may demonstrate absent intrarenal and renal venous flow. Ultimately, the kidney may recover, show focal scarring or become atrophic. Thus, ultrasound provides an accessible and reliable tool in the assessment of suspected neonatal RVT.     

Comparison of three monoclonal antibody pools for the detection of respiratory viral antigen in respiratory secretions

The aim of this study was to compare the sensitivities of commercial monoclonal antibody pools to be used as an initial rapid screen for detection of viral antigens in respiratory secretions. The availability of commercial monoclonal antibodies has dramatically improved the detection of viruses by immunofluorescence techniques in exfoliated cells obtained from respiratory secretions. Several companies have recently introduced monoclonal antibody pools to detect the presence of respiratory viruses in a single preparation. Ninety-four stored slide preparations that had previously been examined by individual monoclonal antibodies were tested using three commercial monoclonal antibody pools produced by Sanofi (UK), Dako (UK), and Quadratech (UK). These monoclonal antibody pools had a sensitivity of 79.6%, 90.9%, and 100%, respectively, when compared with the original results. The overall intensity of immunofluorescence was also examined.     

Cryptosporidium Log-inactivation with Ozone Using Effluent CT10, Geometric Mean CT10, Extended Integrated CT10 and Extended CSTR Calculations

The draft Long-Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) contains Cryptosporidium log-inactivation CT tables (ozone-in-water concentration [residual], “C” times contact time, T). Depending on water temperature, Cryptosporidium CT values that are listed are 15 to 25 times greater than CT values for equivalent Giardia log-inactivation credit. The elevated operating dose required for Cryptosporidium log-inactivation credit has the potential to increase disinfection by-product (DBP) formation (e.g., bromate). Calculating CT value accurately will minimize ozone dose, which will decrease operating cost and lower DBP formation, and at the same time maintain disinfection protection through implementation of scientifically based safety factors. Various methods are available for calculating CT value. The method chosen depends largely on the available information concerning ozone residual characteristics and hydrodynamic features of the ozone contactor, plus local regulatory requirements. Four methods are discussed in this paper. Each method can be used to calculate Giardia, virus, and Cryptosporidium log-inactivation credit.     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

Characteristics of Milk Powders Produced by Spray Freeze Drying

Skim and whole milk powders were manufactured at lab scale by spray freeze drying (SFD), using liquid nitrogen as the cryogen. The polydispersity of droplet/particle sizes was limited using an encapsulator nozzle to atomize the feed. Particle morphology was examined using a scanning electron microscope. Samples were compared with equivalent spray-dried powders in tests of wettability and dissolution in water. The spray freeze-dried powders were found to be highly porous, with a uniform structure of pores throughout the entire particles. When tested in water, SFD skim milk powders wetted roughly three times as fast as industrially spray-dried agglomerated skim milk powders and were observed to dissolve rapidly by breaking down into smaller particles.     

Wideband chirp measurement technique for high bit rate sources

A Mach Zehnder (MZ) interferometer has been used as an optical discriminator to measure the time-resolved frequency chirp of an optical source     

Phenomenological aspects of a modified fragmentation test using small quantities of explosive

This paper describes the phenomenological aspects of a modified fragmentation test which utilizes an annulus of high explosive in contact with the inner wall of a cylinder of material under test. The shock interactions within the cylinder wall on detonation of the explosive are modelled using a one-dimensional Lagrangian computer code. Predictions of fragment velocities are made in this work. The velocities are found to be influenced by the spallation of the cylinder and this effect can be accounted for in the model by using the position of the spall surfaces which have been obtained from experimental firings of cylinders.

The fragment velocities are found to be much lower than those predicted for a conventional fragmentation test which utilizes a cylinder completely filled with high explosive and this suggests that the post-fragmentation damage of the fragments on recovery from the modified fragmentation test will be small. Experimental evidence from the steel cylinders tested in this work shows that the fragmentation mechanisms operating at the initiation of the test are similar to those reported for a conventional fragmentation test.