A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Adaptive joint subband vector quantisation codec for handheld videophone applications

A new wavelet-based video codec is presented, which joins vectors in the same subbands of different frames in a frame group and uses the properties of the human visual system. Perceptual weights are designed and used in the vector selection and quantisation of the wavelet coefficients. Results indicate a significant improvement in frame quality compared to JPEG2000 image sequence coder.     

An incentive scheduling mechanism for peer-to-peer video streaming

P2P video streaming networks are found as a scalable solution and an alternative for traditional client–server based video streaming over the Internet. One of the significant issues affecting the success of any P2P streaming network is cooperation between peers. Practical observations have proved the prevalence of free riders in P2P networks that degrade their performance. To solve this problem, using incentive mechanisms, which encourage peers to contribute more in the network, is necessary. In this paper, we designed and proposed a distributed and scalable incentive mechanism for mesh based P2P video streaming networks. In the proposed approach the contribution of the peers is measured and maintained in a distributed fashion. Furthermore, we proposed an incentive sending side scheduler in which peers are served based on their contribution in the network. Our simulation evaluations show the efficiency of the proposed approach in improving the overall perceived video quality by the non-free rider nodes and consequently in the whole network.     

An improved volleyball premier league algorithm based on sine cosine algorithm for global optimization problem

Volleyball premier league (VPL) simulating some phenomena of volleyball game has been presented recently. This powerful algorithm uses such racing and interplays between teams within a season. Furthermore, the algorithm imitates the coaching procedure within a game. Therefore, some volleyball metaphors, including substitution, coaching, and learning, are used to find a better solution prepared by the VPL algorithm. However, the learning phase has the largest effect on the performance of the VPL algorithm, in which this phase can lead to making the VPL stuck in optimal local solution. Therefore, this paper proposed a modified VPL using sine cosine algorithm (SCA). In which the SCA operators have been applied in the learning phase to obtain a more accurate solution. So, we have used SCA operators in VPL to grasp their advantages resulting in a more efficient approach for finding the optimal solution of the optimization problem and avoid the limitations of the traditional VPL algorithm. The propounded VPLSCA algorithm is tested on the 25 functions. The results captured by the VPLSCA have been compared with other metaheuristic algorithms such as cuckoo search, social-spider optimization algorithm, ant lion optimizer, grey wolf optimizer, salp swarm algorithm, whale optimization algorithm, moth flame optimization, artificial bee colony, SCA, and VPL. Furthermore, the three typical optimization problems in the field of designing engineering have been solved using the VPLSCA. According to the obtained results, the proposed algorithm shows very reasonable and promising results compared to others.

     

Applications,databases and open computer vision research from drone videos and images: a survey

Analyzing videos and images captured by unmanned aerial vehicles or aerial drones is an emerging application attracting significant attention from researchers in various areas of computer vision. Currently, the major challenge is the development of autonomous operations to complete missions and replace human operators. In this paper, based on the type of analyzing videos and images captured by drones in computer vision, we have reviewed these applications by categorizing them into three groups. The first group is related to remote sensing with challenges such as camera calibration, image matching, and aerial triangulation. The second group is related to drone-autonomous navigation, in which computer vision methods are designed to explore challenges such as flight control, visual localization and mapping, and target tracking and obstacle detection. The third group is dedicated to using images and videos captured by drones in various applications, such as surveillance, agriculture and forestry, animal detection, disaster detection, and face recognition. Since most of the computer vision methods related to the three categories have been designed for real-world conditions, providing real conditions based on drones is impossible. We aim to explore papers that provide a database for these purposes. In the first two groups, some survey papers presented are current. However, the surveys have not been aimed at exploring any databases. This paper presents a complete review of databases in the first two groups and works that used the databases to apply their methods. Vision-based intelligent applications and their databases are explored in the third group, and we discuss open problems and avenues for future research.

     

Ultrasonic-assisted drilling of Inconel 738-LC

Generally in the drilling of modern aviation materials such as nickel and titanium base super alloys, problems frequently occur in terms of burr formation at the cutter exit, tool stress, high heat generation on tool surface as well as low process reliability. A recent and promising method to overcome these technological constraints is the use of ultrasonic assistance, where high-frequency and low-amplitude vibrations are superimposed on the movement of cutting tools. This paper presents the design of an ultrasonically vibrated tool holder and the experimental investigation of ultrasonically assisted drilling of Inconel 738-LC. The circularity, cylindricity, surface roughness and hole oversize of the ultrasonically and conventionally drilled workpieces were measured and compared. The obtained results show that the application of ultrasonic vibration can improve the hole quality considerably. Improvements of up to 60% have been achieved.     

Assessment of Sustainability in Water Supply-Demand Considering Uncertainties

Water is a vital resource for life on earth; hence its maintenance is very important. Different regions especially in arid and semi-arid areas are facing population growth and subsequent increase in the domestic, industrial and agricultural activities. Planning of water systems in order to be ready for future development conditions needs further studies on the estimation of the sustainable levels of demands based on the sustainable levels of supplies. In this study a threefold approach for estimating sustainability level of supply and demand in Ahachay river basin in northwestern part of Iran as a case study is taken. In the first method, the internal flows and the origins and final uses of the total resources for each subsystem are estimated and planning for sustainability use index is determined by calculating the available water. Second method introduced a simulation model which is utilized to estimate reliability, resiliency, vulnerability and maximum deficit for a river basin to determine a group sustainability index. In the third method, for evaluating the movement toward sustainability, an index is developed. This index includes parameters that are the difference between supply and demand, percentage of the satisfied demand, productivity of water resources and an indicator for evaluating the reduction of aquifer storage. Finally these methods are compared and a hybrid index combining the indices is developed. An uncertainty analysis is also performed to investigate the random nature of variables in estimating water balance and quantifying the water sustainability. This hybrid index can be used for evaluating the planning scenarios and for maintaining and improving the sustainable state of supply-demand for the region.     

Preparation,characterization and in vitro drug release properties of polytrimethylene carbonate/polyadipic anhydride blend microspheres

Polyadipic anhydride (PAA), an aliphatic polyanhydride, and polytrimethylene carbonate (PTMC), an aliphatic polycarbonate, were synthesized via ring opening polymerization of oxepan‐2,7‐dione and melt‐condensation of trimethylene carbonate (1,3 dioxan‐2‐one), respectively. PTMC–PAA blend microspheres containing different ratios of buprenorphine HCl (2, 5, and 10%) were prepared by an oil‐in‐oil emulsion solvent removal method. Microspheres with different ratios of PTMC–PAA (85/15, 70/30, and 55/45) containing 5% buprenorphine HCl were prepared. Microspheres were spherical with visible cracks and pores on the surface. The average particle size of microspheres was around 200 μm for all microspheres. Drug loading efficiency of PTMC–PAA microspheres (85/15, 70/30, and 55/45) was 97.2, 95.2, and 70.2%, respectively. With the increase in the PTMC ratio, the melting point and the enthalpy of melting were both decreased. The mechanism for drug release from PTMC–PAA blend microspheres were generally a combination of drug diffusion through polymers and biodegradation of the polymers. In first three days, the release from microspheres followed zero order kinetics and was dependent on the PAA content. After three days the drug release from microspheres followed first order kinetics. In conclusion it was demonstrated that buprenorphine HCl release from microspheres could be successfully controlled by using different ratios of PTMC–PAA blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2377–2383, 2006     

Approximating of conic sections by DP curves with endpoint interpolation

Conic sections have many applications in industrial design, however, they cannot be exactly represented in polynomial form. Hence approximating conic sections with polynomials is a challenging problem. In this paper, we use the monomial form of Delgado and Peña (DP) curves and present a matrix representation for them. Using the matrix form and the least squares method, we propose a simple and efficient algorithm for approximating conic sections by DP curves of arbitrary degree with endpoint interpolation. Finally, we test and compare the proposed algorithm on some numerical examples which validates and confirms efficiency of it.     

Adaptive content-and-deadline aware chunk scheduling in mesh-based P2P video streaming

In mesh-based Peer-to-Peer (P2P) live video streaming systems packet scheduling is an important factor in overall video playback quality. In mesh based P2P video streaming systems, each video sequence is divided into chunks, which are then distributed by multiple suppliers to the receivers. The suppliers need to be coordinated by the receiver through specifying a transmission schedule for each of them. Many previous studies on scheduling of P2P streaming tend to mainly focus on networking issues which strongly depend on a particular P2P architecture such as tree or mesh. These algorithms suffer from some design issues: 1) they are too complex to deploy, 2) they do not take video characteristics into account and 3) they do not have sender-side transmission policy. To address all three of these problems, we propose a new chunk scheduling scheme which consists of two parts: i) receiver-side scheduler and ii) sender-side transmission order scheme. The proposed receiver-side scheduler considers the contribution level of each video frame as well as the frame’s urgency in order to define a priority for each video frame. It attempts to request frames with highest priority from peers which can deliver them in a shorter time. We also design a new chunk transmission order scheme that decides which requested chunk will be sent out first based on its importance to the requesting neighbor. Our simulation results show that the proposed scheduling scheme improves the overall quality of the perceived video in mesh-based P2P video streaming architectures substantially.